Characterization of GaAs layers grown on polycrystalline GaAs by LPE and current controlled LPE

It is the purpose of this paper to investigate the suitability and effectiveness of growth of thin GaAs layers on polycrystalline GaAs substrates by liquid phase epitaxy (LPE) and current controlled LPE (CCLPE). During each growth run LPE and CCLPE were used to grow thin GaAs layers on two large-grain polycrystalline GaAs substrates cut from the same wafer and simultaneously placed in the same growth system. The grain boundary was exposed by cleaving the samples perpendicular to the grain boundary. Notnarski contrast, SEM, C-V and Hall measurements were performed in order to determine the surface morphology, discontinuity of epilayer at the grain boundary, epilayer thickness unform-ity, resistivity (in directions parallel and perpendicular to the grain boundary), and dopant concentration. The CCLPE system was carefully designed so that growth would take place only by electrotransport in the absence of convection or Peltier cooling. The results indicate that CCLPE yields layers with improved surface morphology and thickness uniformity as compared to those grown by LPE. In some samples the epilayer was discontinuous at certain grain boundaries. Results are presented on CCLPE growth rate dependence upon grain orientation, current density, and continuity of the epilayer at the grain boundary.     

Managing incidents in a complex system: a railway case study

The authors of this paper review how complex entities, composed of many interdependent subsystems, such as international rail operators, can improve their ability to recover from incidents through the better management of key interfaces. The principles of Normal Accident Theory and resilience engineering are discussed, and the case study of the Eurostar incident of 18–19 December 2009 is considered in detail. Lessons learnt from resilience engineering are applied to the case study to extract recommendations by which incident management for open access international rail transport may be improved.     

Spread of marker bacteria from the hides of cattle in a simulated livestock market and at an abattoir

The spread of microbial contamination on the hides of beef was investigated at two stages in the meat chain: (i) in a simulated livestock market ("the market") using 33 animals, and (ii) in the unloading-to-skinning area of a commercial abattoir using 18 animals. At both stages, harmless bacterial markers (nalidixic acid-resistant Escherichia coli K-12; rifampicin- and nalidixic acid-resistant Pseudomonas fluorescens; and a tetracycline-resistant E. coli) were inoculated on the hides of a small number of selected animals, and their transfer to other animals and the environment was examined. At the market, the initial prevalence of animals positive for the hide markers (9.1% in each phase) introduced in the presale pen, sale ring, and postsale pen changed to 39.4, 15.1, and 54.5%, respectively, by the end of the market process. In addition, widespread contamination of the market environment with the hide markers was observed. At the abattoir, the initial prevalence of animals positive for the hide marker (11.1%) inoculated at unloading increased to 100% (hide before skinning) and 88.8% (skinned carcass). In addition, another marker inoculated on environmental surfaces in lairage pens, races, and stunning box was detected on 83.3% (hide before skinning) and 88.8% (skinned carcass). These results, although obtained with a relatively small number of animals, demonstrate that both the livestock market process and the unloading-to-skinning process at abattoirs can facilitate the extensive spread of microbial contamination on hides not just within, but also between, batches of animals.     

Testing white line strength in the dairy cow

The tensile strength of 576 pieces of white line horn collected over 6 mo from 14 dairy cows restricted to parity 1 or 2 was tested. None of the cows had ever been lame. Seven cows were randomly assigned to receive 20 mg/d biotin supplementation, and 7 were not supplemented. Hoof horn samples were taken from zones 2 and 3 (the more proximal and distal sites of the abaxial white line) of the medial and lateral claws of both hind feet on d 1 and on 5 further occasions over 6 mo. The samples were analyzed at 100% water saturation. Hoof slivers were notched to ensure that tensile strength was measured specifically across the white line region. The tensile stress at failure was measured in MPa and was adjusted for the cross-sectional area of the notch site. Data were analyzed in a multilevel model, which accounted for the repeated measures within cows. All other variables were entered as fixed effects. In the final model, there was considerable variation in strength over time. Tensile strength was significantly higher in medial compared with lateral claws, and zone 2 was significantly stronger than zone 3. Where the white line was visibly damaged the tensile strength was low. Biotin supplementation did not affect the tensile strength of the white line. Results of this study indicate that damage to the white line impairs its tensile strength and that in horn with no visible abnormality the white line is weaker in the lateral hind claw than the medial and in zone 3 compared with zone 2. The biomechanical strength was lowest at zone 3 of the lateral hind claw, which is the most common site of white line disease lameness in cattle.     

Clear air turbulence detection

Although it is difficult to describe the nature of clear air turbulence (or CAT), we know its effect?the sudden vibration experienced by an aircraft in flight in a stormfree, cloudfree sky. It is evident that this turbulence is an eddy motion of the air that disrupts its uniform flow, a motion such as that associated with jet streams; however, we do not know exactly how it is generated. Because the effects of CAT can range from mere passenger discomfort to actual loss of an aircraft, it is important to devise some method of warning the pilot of turbulent areas to be avoided. Various indirect and direct detection systems, employing both active and passive techniques, are currently being investigated, but thus far all have exhibited serious limitations on effective performance. One reason for this is the lack of data concerning the phenomenon they are designed to detect.     

Computer Control of the Gilford Model 252-1 Spectrophotometer Modernization System

ABSTRACT

The construction of an interfacing device between a Gilford Model 252-1 Spectrophotometer Modernization System and a Commodore PET microcomputer is described. Modifications to the Gilford automatic cuvette positioner to allow computer control are also described. The program for operation of the modified system is listed. A comparison between computer and manually obtained rates is included.     

Adaptation of courses for trans-European tele-learning

Abstract This paper addresses the problems of adapting instructional courses for trans-European tele-learning and for enlarging the range of students and learning modalities in distance learning. Building on previous work on the portability of educational software , the paper examines various dimensions of adaptation of existing courses: (a) content, (b) instructional materials, (c) language issues, (d) instructional delivery, (e) the instructional setting of the course, and (f) the situation of the course in a programme of study, and considers how those dimensions will particularly affect course adaptation. From this analysis, a set of six guidelines is presented for course adaptation. The Commission of the European Community recently supported a trans-European project, TeleScopia, which aimed at investigating these dimensions as research issues.     

Novel monohydroxamate drugs attenuate myocardial reperfusion-induced arrhythmias

Cultivated sugarcane clones (Saccharum spp., 2n=100 to 130) are derived from complex interspecific hybridizations between the species S. officinarum and S. spontaneum. Using comparative genomic DNA in situ hybridization, we demonstrated that it is possible to distinguish the chromosomes contributed by these two species in an interspecific F1 hybrid and a cultivated clone, R570. In the interspecific F1 studied, we observed n + n transmission of the parental chromosomes instead of the peculiar 2n + n transmission usually described in such crosses. Among the chromosomes of cultivar R570 (2n = 107-115) about 10% were identified as originating from S. spontaneum and about 10% were identified as recombinant chromosomes between the two species S. officinarum and S. spontaneum. This demonstrated for the first time the occurrence of recombination between the chromosomes of these two species. The rDNA sites were located by in situ hybridization in these two species and the cultivar R570. This supported different basic chromosome numbers and chromosome structural differences between the two species and provided a first bridge between physical and genetical mapping in sugarcane.     

Young children's understanding of the cognitive verb forget

Investigation of children's understanding of the cognitive verb forget has shown that young children do not consider the role of prior knowledge when using this verb. Thus, someone may be said to have forgotten a fact despite not ever having previously known it. However, forget can also be used to refer to a failure to recall a prior intention. Three experiments examined the role of prior intention as well as prior knowledge in the comprehension of forget by 160 young children aged four to eight years. The results showed that children initially have two interpretations of forget: as an unfulfilled desire rather than a failure to recall a prior intention, and as a state of not knowing rather than a failure to recall prior knowledge. Explanations for the late comprehension of forget are discussed in terms of representation of knowledge and intention, processing capacity and exposure to pragmatic usages.