State multiplicity in CSTR-separator-recycle polymerisation systems

This article continues earlier work (Comput. Chem. Eng. 24 (2000) 209) concerning the design and control of isothermal reactor-separator-recycle systems. The multiplicity behaviour of six reaction systems of increasing complexity, from one-reactant, first-order reaction to chain-growth polymerisation, is investigated. Below a critical value of the plant Damkohler number, Da<Da^cr, the only steady state involves infinite flow rates. Feasible steady states become possible if the critical value is exceeded, Da>Da^cr. For one-reaction systems, one stable steady state is born at a transcritical bifurcation. For consecutive-reaction systems, including polymerisation, a fold bifurcation can lead to two feasible steady states. Moreover, the transcritical bifurcation is destroyed when two reactants are involved. If the gel-effect is included, a maximum of four steady states are possible. When multiple steady states exist, the achievable conversion is constrained by the instability of the low-conversion branch. This has practical importance for polymerisation systems when the radicals’ quasi-steady state assumption is not valid or the gel effect is significant.     

Well-Known and Novel Serum Biomarkers for Risk Stratification of Patients with Non-ischemic Dilated Cardiomyopathy

Non-ischemic dilated cardiomyopathy encompasses a wide spectrum of myocardial disorders, characterized by left ventricular dilatation with systolic impairment and increased risk of sudden cardiac death. In spite of all the therapeutic progress that has been made in recent years, dilated cardiomyopathy continues to be an important cause of cardiac transplant, being associated with an enormous cost burden for health care systems worldwide. Predicting the prognosis of patients with dilated cardiomyopathy is essential to individualize treatment. Late gadolinium enhancement-cardiac magnetic resonance imaging, microvolt T-wave alternans, and genetic testing have emerged as powerful tools in predicting sudden cardiac death occurrence and maximizing patient’s selection. Despite all these new diagnostic modalities, additional tests to complement or replace current tools are required for better risk stratification. Therefore, biomarkers are an easy and important tool that can help to detect patients at risk of adverse cardiovascular events. Additionally, identifying potential biomarkers involved in dilated cardiomyopathy can provide us important information regarding the diagnostic, prognostic, risk stratification, and response to treatment for these patients. Many potential biomarkers have been studied in patients with dilated cardiomyopathy, but only a few have been adopted in current practice. Therefore, the aim of our review is to provide the clinicians with an update on the well-known and novel biomarkers that can be useful for risk stratification of patients with non-ischemic dilated cardiomyopathy.     

A bootstrap approach for lower injury levels of the risk curves

Survival analysis is widely applied to develop injury risk curves from biomechanical data. To obtain more accurate estimation of confidence intervals of parameters, bootstrap method was evaluated by a designed simulation process. Four censoring schemes and various sample sizes were considered to investigate failure time parameters corresponding to low-level injury probabilities. In the numerical simulations, the confidence interval ranges developed by bootstrapping were about two-third of the corresponding ranges calculated by asymptotical normal approximation and showed highest reduction for censored datasets with smaller sample size (≤ 40). In analysis of two experimental datasets with reduced sample sizes and mixed censored data, it was shown that the bootstrapping reduce significantly the confidence intervals as well. The results presented in this study recommend using bootstrapping in development of more accurate confidence intervals for risk curves in injury biomechanics, which consequently will lead to better regulations and safer vehicle designs.     

On the performance of distributed space-time coding systems with one and two non-regenerative relays

Spatial diversity can be induced by using wireless relay stations, which cooperate by amplifying and retransmitting the information received from a source to a destination station. In this context we propose a distributed space-time coding (DSTC) system based on the Alamouti codes. We characterize the symbol error rate of systems with one and two non-regenerative relays using bounds and high signal-to-noise ratio (SNR) approximations. The asymptotic (high SNR) symbol error probability formulas are used to optimize the power allocation in the DSTC system. Furthermore, using the asymptotic symbol error probability formulas we argue that the DSTC system has at least 1.5 times the diversity achieved by point-to-point transmissions with the same bandwidth. Simulations show not only that the DSTC outperforms the amplify-and-forward cooperative system with orthogonal transmissions, but also convolutional encoded one-hop transmissions with the same information rate as the DSTC system. Assuming full channel knowledge at the source and the relays, we find an optimum cooperative system by minimizing the bit error rate of the DSTC system with one and two non-regenerative relays subject to fixed transmit energy constraints at each radio. Numerical results show that the DSTC system with two relays performs very close to the optimum cooperative system.     

New method for threshold voltage extraction of high-voltage MOSFETs based on gate-to-drain capacitance measurement

This letter reports on the extraction of the threshold voltage of laterally diffused MOS transistors. A clear analysis of the device physics is performed, highlighting the correlation between the change of the electron charge distribution along the channel and the device capacitance variations when the gate voltage is swept. Using numerical simulations, it is shown that the peak of the gate-to-drain capacitance is related to the transition of the surface from weak to moderate inversion in the intrinsic MOS transistor at the location of the maximum doping concentration, which corresponds to the threshold voltage of the device according to the MOS theory. Comparison between conventional I/sub D///spl radic/g/sub m/ extraction and the new proposed capacitance peak method is performed on both technology computer-aided design simulations and measurements in order to confirm the new experimental technique and related theory.     

Human, rhesus macaque, and feline sequences highly similar to mouse mammary tumor virus sequences

Sequences highly similar (>95%) to the mouse mammary tumor virus (MMTV) env gene have been amplified from human DNA samples, including DNA samples from patients with breast cancer (BC) and persons who did not have BC. The sequences from human DNA were distinct from the MMTV sequences used as controls in these PCR reactions, indicating that these results are not simply due to contamination. In addition to both, mouse and human-related sequences were also amplified from some monkey and cat genomic DNA samples. These products were shown to be distinct from, but highly related to, the MMTV env gene, whereas, testing of other sources (lambda phage, snake, cockroach, sea urchin, chicken, or dog) demonstrated no specific amplification. A sequence 90% similar to the MMTV group antigen gene (gag) was amplified from cat DNA. These results indicate that DNA from vertebrate species other than rodents, including some but not all humans, monkeys, and cats, can contain sequences closely related to MMTV.     

Synthesis and testing of cellulose acetate nicotinate as adsorbent for rhodamine B dye

The esterification of cellulose hydroxyl groups with natural carboxylic acids in mild conditions represents an adequate pathway in obtaining cellulose derivatives with different useful properties. In this article, authors report the synthesis of new mixed ester of cellulose and cellulose acetate nicotinate (CAN) , in a homogenous medium using DMF as solvent, cellulose acetate (CA) as starting cellulosic material, and nicotinic acid as an esterification agent in the presence of p-toluenesulfonyl chloride and pyridine. FTIR and NMR techniques were used to prove the binding of nicotinoyl group at free hydroxyl groups of CA. The obtained CAN was electrospun by electrospinning technique to obtain adsorbent ultrafine fibers, evidenced by SEM images, with high specific surface area. Monolayer Langmuir and empirical Leundrich isotherms were used to assess the adsorption capacity for rhodamine B dye of electrospun CAN in comparison with that of electrospun CA used as starting material. Langmuir isotherm led to a better assessment of experimental data suggesting that the adsorption is mainly determined by hydrogen bonds formed between carboxylic OH hydrogen bonding donor and pyridine N hydrogen bonding acceptor. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47772.     

Cyclic distillation technology – a mini‐review

Process intensification in distillation systems has received much attention during past decades, with the aim of increasing both energy and separation efficiency. Various techniques, such as internal heat‐integrated distillation, membrane distillation, rotating packed bed, dividing‐wall columns and reactive distillation were studied and reported in the literature. All these techniques employ the conventional continuous counter‐current contact of vapor and liquid phases. Cyclic distillation technology is based on an alternative operating mode using separate phase movement which leads to key practical advantages in both chemical and biochemical processes. This article provides a mini‐review of cyclic distillation technology. The topics covered include the working principle, design and control methods, main benefits and limitations as well as current industrial applications. Cyclic distillation can be rather easily implemented in existing columns by simply changing the internals and the operating mode, thus bringing new life to old distillation towers by significantly increasing the column throughput, reducing the energy requirements and offering better separation performance. © 2016 Society of Chemical Industry     

A review of biodiesel production by integrated reactive separation technologies

Biodiesel is a biodegradable and renewable fuel, emerging as a viable alternative to petroleum diesel. Conventional biodiesel processes still suffer from problems associated with the use of homogeneous catalysts and the limitations imposed by the chemical reaction equilibrium, thus leading to severe economic and environmental penalties. This work provides a detailed review—illustrated with relevant examples—of novel reactive separation technologies used in biodiesel production: reactive distillation/absorption/extraction, and membrane reactors. Reactive separation offers new and exciting opportunities for manufacturing the fatty acid alkyl esters involved in the industrial production of biodiesel and specialty chemicals. The integration of reaction and separation into one operating unit overcomes equilibrium limitations and provides major benefits such as low capital investment and operating costs. These reactive separation processes can be further enhanced by heat‐integration and powered by heterogeneous catalysts, to eliminate all conventional catalyst related operations, using efficiently the raw materials and the reaction volume, while offering higher conversion and selectivity, as well as significant energy savings compared with conventional biodiesel processes. Remarkable, in spite of the high degree of integration, such integrated reactive‐separation processes are still very well controllable as illustrated by the included examples. Copyright © 2012 Society of Chemical Industry