A novel super compact half‐mode substrate‐integrated waveguide filter using modified complementary split‐ring resonator

A novel super compact filter based on half‐mode substrate‐integrated waveguide (HMSIW) technology loaded by the modified complementary split‐ring resonator (MCSRR) is proposed. The working principle of the proposed filter is based on the evanescent‐mode propagation technique. According to this technique, by loading the complementary split‐ring resonator (CSRR) on the metal surface of the substrate‐integrated waveguide (SIW) structure, an additional passband below the SIW cutoff frequency can be obtained. In order to miniaturize the physical size of the conventional CSRR, a new method is introduced. In the proposed MCSRR unit‐cell, the meander slots are carved inside all of the interior space of the ring. Accordingly, the length of the slot is increased which leads to an increase in the inductor and capacitor of the proposed structure without occupying the extra space. Therefore, the electrical size of the proposed MCSRR unit‐cell is reduced. Consequently, the resonance frequency of the proposed MCSRR unit‐cell is decreased compared to the conventional CSRR with the same sizes. Namely, the lower resonance frequencies can be achieved by using this technique without increasing the size of the unit‐cell. In order to confirm the miniaturization technique, two HMSIW filters loaded by the proposed MCSRR unit‐cell are designed, fabricated, and experimental verifications are provided. The results show that a miniaturization about 67% is achieved.     

Compact metamaterial unit‐cell based on stepped‐impedance resonator technique and its application to miniaturize substrate integrated waveguide filter and diplexer

In this article, a new miniaturized metamaterial unit‐cell using stepped‐impedance resonator technique is proposed. The proposed unit‐cell is used to miniaturize the physical size of the conventional complementary split‐ring resonators (CSRRs). In the proposed unit‐cell which is called complementary G‐shaped resonator (CGR), the slot line in the conventional circular CSRR is replaced with the stepped‐impedance slot line. As well as, by carving two trapezoidal shapes inside the inner ring, the resonance frequency of the proposed CGR unit‐cell has been more decreased. Compared to the conventional circular CSRR structure, the electrical size of the proposed CGR is decreased and miniaturization is occurred. To investigate the performance of the proposed CGR unit‐cell in the size reduction, two substrate integrated waveguide filters and a diplexer are designed. To validate the proposed miniaturization technique, the designed filters and diplexer loaded by the CGR unit‐cell are fabricated and measured. The measured results are in a good agreement with the simulated ones. The results shows that, a miniaturization factor about 0.69 is achieved.     

Miniaturized substrate integrated waveguide filter using fractal open complementary split‐ring resonators

A miniaturized substrate integrated waveguide (SIW) bandpass filter using fractal open complementary split‐ring resonators (FOCSRRs) unit‐cell is proposed. The proposed structure is realized by etching the proposed FOCSRR unit‐cells on the top metal surface of the SIW structure. The working principle of the proposed filter is based on the evanescent‐mode propagation. The proposed FOCSRRs behave as an electric dipoles in condition of the appropriate stimulation, which are able to generate a forward‐wave passband region below the cutoff frequency of the waveguide structure. Since, the electrical size of the proposed FOCSRRs unit‐cell is larger than the conventional OCSRRs unit‐cell; therefore, the FOCSRR unit‐cell is a good candidate to miniaturize the SIW structure. The proposed filter represents high selectivity and compact size because of the utilization of the sub‐wavelength resonators. The introduced filter is simulated by a 3D electromagnetic simulator. In order to validate the ability of the proposed topology in size reduction, 1‐ and 2‐stage of the proposed filters have been fabricated based on the standard printed circuit board process. The measured S‐parameters of the fabricated filters are in a good agreement with the simulated ones. The proposed SIW filters have many advantages in term of compact size, low insertion loss, high return loss, easy fabrication and integration with other circuits. It is the first time that the FOCSRR unit‐cells were combined with the SIW structure for miniaturization of this structure. Furthermore, a wide upper‐stopband with the attenuation >20 dB in the range of 3–8 GHz is achieved. The results show that, a miniaturization factor about 75.5% has been obtained.     

Compact bandpass filter based on SIW loaded by open complementary split‐ring resonators

A compact substrate integrated waveguide (SIW) with open complementary split‐ring resonators (OCSRRs) loaded on the waveguide surface is proposed. The OCSRRs can be interpreted in terms of electric dipoles and they are good candidates to behave as electric scatterers. By loading OCSRRs on the waveguide surface, a forward‐wave pass‐band propagating below the waveguide cutoff frequency is generated. The resonance frequency of the OCSRRs is approximately half of the resonance frequency of the complementary split ring resonator (CSRR). Therefore, the electrical size of this particle is larger than the CSRRs and the OCSRRs are more appropriate for the SIW miniaturization. A bandpass response with a sharp rejection frequency band is obtained by properly manipulating the structure of the elements. By changing the orientation of the OCSRRs, two types of unit cell are proposed. Moreover, by resizing the OCSRRs, resonance frequency can be easily moved and the bandwidth can be tuned by the coupling between two OCSRRs. Compared with some other reported bandpass filters (BPFs) with SIW technique, the presented BPF has great improvements on size reduction and selectivity. To verify the methodology, two filters with center frequency of 5.5 GHz are designed and measured. The measured results are in good agreement with the simulated ones. © 2016 Wiley Periodicals, Inc. Int J RF and Microwave CAE 26:674–682, 2016.     

Ultracompact two‐way and four‐way SIW/HMSIW power dividers loaded by complementary split‐ring resonators

In this paper, two ultracompact power dividers based on the substrate integrated waveguide (SIW) and half‐mode SIW (HMSIW) technologies loaded by complementary split‐ring resonators (CSRRs) are presented. The presented structures are designed based on the theory of evanescent mode propagation. To obtain a size reduction, the CSRR unit cells are etched on the metallic surface of the SIW and HMSIW structures. First, a two‐way HMSIW power divider is reported. In this circuit, the concept of HMSIW is utilized aiming at a further size reduction in addition to the size reduction by the CSRR unit cells. Then, a four‐way SIW power divider is designed so that the direct coaxial feed is used for the input port and microstrip transmission lines are used for the output ports. Both two‐way and four‐way SIW/HMSIW power dividers at 5.8 GHz covering WLAN are designed, fabricated, and measured. They respectively have 0.18 × 0.21 λg² and 0.38 × 0.21 λg² total size. A fair agreement between simulated and measured results is achieved. The measured insertion losses are 0.5 ± 0.5 and 0.6 ± 0.5 dB for the two‐way and four‐way SIW/HMSIW power dividers, respectively, in the operating band of interest.     

A compact and high performance dual-band bandpass filter based on unbalanced composite right/left-handed transmission lines for WLANs applications

In this paper, a novel compact microstrip dual-band (DB) bandpass filter with high selectivity for wireless local area networks applications is proposed. The design procedure is based on unbalanced composite right/left-handed (UCRLH) transmission lines (TLs). The DB features can be achieved by unbalancing the CRLH transmission line. The necessary conditions to obtain a discontinuous transition between the left- and right-handed bands, intended to provide UCRLLH TL, are investigated. The application of this technique to design of compact DB filters is illustrated. The structure of the proposed DB filter is implemented by a series interdigital capacitor located between two microstrip lines that shorted to the ground plane by vias. The vias with microstrip lines acting as a shunt connected inductor while the series capacitor is realized by interdigital capacitor. The design procedure based on a simple equivalent circuit is also introduced. The proposed filter has advantages such as compact size, easy fabrication, high selectivity, low insertion loss, high return loss and, design flexibility. To validate the proposed technique, the proposed DB filter has been fabricated and tested. Good agreement has been found between simulation and measurement results. The total size of the proposed UCRLH DB filter is 0.17 λ_g × 0.048 λ_g, where λ_g is the guided wavelength of the lower pass-band. The size of the proposed DB filter is more compact in comparison with known similar filters.     

Novel single-layer dual-band half-mode substrate integrated waveguide filter and filtering power dividers with very compact sizes

In this article, a novel single-layer dual-band (DB) half-mode substrate integrated waveguide (HMSIW) filter and three equal/unequal DB HMSIW filtering power dividers (FPDs) with super-compact sizes have been proposed. In order to design the proposed devices, the evanescent mode technique and the metamaterial concept have been used, simultaneously. Two passbands have been generated below the cut-off frequency of the HMSIW structure by etching a new compact DB metamaterial unit cell with effective negative permittivity in two different frequencies on the metal surface of the HMSIW structure. The center frequencies of these two passbands can be simply controlled by changing the size of the DB metamaterial unit cell. To confirm the design concept, three prototypes of the DB structures working at 2.4 and 3.5 GHz are simulated, constructed, and measured. The overall dimension of the designed DB HMSIW filter and DB HMSIW FPDs are approximately 0.12 λ_g × 0.11 λ_g. Compared to other existing devices, the performance of the proposed structures is very satisfactory. Compact size, easy integration, easy fabrication process, low cost, low loss, and high selectivity are the advantages of the designed structures.     

High-performance filtering power divider based on air-filled substrate integrated waveguide technology

A filtering power divider based on air-filled substrate-integrated waveguide (AFSIW) technology is proposed in this study. The AFSIW structure is used in the proposed filtering power divider for substantially reducing the transmission losses. This structure occupies a large area because of the use of air as a dielectric instead of typical dielectric materials. A filtering power divider provides power division and frequency selectivity simultaneously in a single device. The proposed filtering power divider comprises three AFSIW cavities. The filtering function is achieved using symmetrical inductive posts. The input and output ports of the proposed circuit are realized by directly connecting coaxial lines to the AFSIW cavities. This transition from the coaxial line to the AFSIW cavity eliminates the additional transitions, such as AFSIW-SIW and SIW-conductor-backed coplanar waveguide, applied in existing AFSIW circuits. The proposed power divider with a second-order bandpass filtering response is fabricated and measured at 5.5 GHz. The measurement results show that this circuit has a minimum insertion loss of 1 dB, 3-dB fractional bandwidth of 11.2%, and return loss exceeding 11 dB.     

A Novel Miniaturized Dual-Band Substrate Integrated Waveguide Filter Using Metamaterial Unit-Cells with High Selectivity

Wireless Personal Communications - In this paper, a novel miniaturized dual-band (DB) substrate integrated waveguide (SIW) filter using metamaterial unit-cells with high selectivity is proposed....