Lean production teams and health in garment manufacture.

The impact of lean production on psychological health was assessed by comparing lean production teams in garment manufacture with a traditional system for making similar garments. Work design characteristics were examined as mediators of the impact of work organization on health. Findings indicate both positive and negative direct effects of teamworking on aspects of autonomy, work demands, and social climate. In turn, both positive and negative direct effects of work design on psychological health were found, which combine to give no overall difference between the groups. This study suggests that the balance between positive and negative effects of lean production teamworking depends on management choices in the form of work design. (PsycINFO Database Record (c) 2011 APA, all rights reserved)     

A catalyst-free and facile route to periodically ordered and c-axis aligned ZnO nanorod arrays on diverse substrates

In this work we present a method for the deposition of periodically ordered, c-axis aligned ZnO nanorod arrays. By using chemical bath deposited films in conjunction with silica templating through nanosphere monolayers, masks suitable for high temperature deposition are created. A vapour phase transport technique is then used to deposit ordered arrays, quickly and inexpensively in a manner ideal for low cost, scalable and reproducible growth on a diverse range of substrates.     

Theoretical analysis of light scattering properties of encapsulated rutile titanium dioxide pigments in dependent light scattering regime

Using numerical simulation, we study and compare the optical properties of model systems representing three types of scatterer: (a) standard TiO₂ pigments, (b) standard TiO₂ pigments encapsulated by a hard polymer shell and (c) standard TiO₂ pigments encapsulated by a layer of air and a polymer shell. Calculations are performed taking into account multiple and dependent light scattering regimes. Assuming an equivalent amount of TiO₂ in each system, results show that a standard TiO₂ pigment particle encapsulated by air could be a better opacifier than a standard un-encapsulated TiO₂ pigment because the presence of air could provide: (a) additional volume to the existing particle to scatter light; (b) better redistribution of the scattered field in the backward hemisphere; (c) a scattering cross-section less affected by crowding and (d) spacing effects due to the presence of the thin hard polymer shell which is required to encapsulate the air layer. Nonetheless, results also suggest that such benefits could probably not be exploited in real paint systems as encapsulated TiO₂ would only be more efficient than standard TiO₂ in a range of pigment volume filling fractions (PVC) that would not generate enough scattering efficiency to yield complete hiding as required by international standards.     

Everyday concept detection in visual lifelogs: validation,relationships and trends

The Microsoft SenseCam is a small lightweight wearable camera used to passively capture photos and other sensor readings from a user’s day-to-day activities. It captures on average 3,000 images in a typical day, equating to almost 1 million images per year. It can be used to aid memory by creating a personal multimedia lifelog, or visual recording of the wearer’s life. However the sheer volume of image data captured within a visual lifelog creates a number of challenges, particularly for locating relevant content. Within this work, we explore the applicability of semantic concept detection, a method often used within video retrieval, on the domain of visual lifelogs. Our concept detector models the correspondence between low-level visual features and high-level semantic concepts (such as indoors, outdoors, people, buildings, etc.) using supervised machine learning. By doing so it determines the probability of a concept’s presence. We apply detection of 27 everyday semantic concepts on a lifelog collection composed of 257,518 SenseCam images from 5 users. The results were evaluated on a subset of 95,907 images, to determine the accuracy for detection of each semantic concept. We conducted further analysis on the temporal consistency, co-occurance and relationships within the detected concepts to more extensively investigate the robustness of the detectors within this domain.     

Wheel-rail contact elements incorporating irregularities

The aim of this study is to simulate the dynamic vertical response of a vehicle traversing rigid rails and a railway bridge. This is achieved by using the authors' wheel-rail contact element (WRC) to model the dynamic interaction that exists between a sprung wheel, using a Hertzian spring, and the rail. The objective in creating these elements was to model the rail and wheel irregularities, which was not a feature of the contact elements within the ANSYS finite element program. In this paper the numerical results generated using the authors' WRC element are identical to the results generated using the commercial contact element of ANSYS for a smooth rail condition. In the case of irregular rails, the numerical results generated using the authors' WRC elements compare very favourably with the results from the literature.     

Characterization of HgCdTe MWIR Back-Illuminated Electron-Initiated Avalanche Photodiodes

This article reports new characterization data for large-area (250 μm ×  250 μm) back-illuminated planar n-on-p HgCdTe electron-initiated avalanche photodiodes (e-APDs). These e-APDs were fabricated in p-type HgCdTe films grown by liquid-phase epitaxy (LPE) on CdZnTe substrates. We previously reported that these arrays exhibit gain that increases exponentially with reverse bias voltage, with gain-versus-bias curves that are quite uniform from element to element, and with a maximum gain of 648 at −11.7 V at 160 K for a cutoff wavelength of 4.06 μm. Here we report new data on these planar e-APDs. Data from a third LPE film with a longer cutoff wavelength (4.29 μm at 160 K) supports the exponential dependence of gain on cutoff wavelength, for the same bias voltage, that we reported for the first two films (with cutoffs of 3.54 μm and 4.06 μm at 160 K), in agreement with Beck’s empirical model for gain versus voltage and cutoff wavelength in HgCdTe e-APDs. Our lowest gain-normalized current density at 80 K and zero field-of-view is 0.3 μA/cm² at −10.0 V for a cutoff of 4.23 μm at 80 K. We report data for the temperature dependence of gain over 80 K to 200 K. We report, for the first time, the dependence of measured gain on junction area for widely spaced circular diodes with radii of 20 μm to 175 μm. We interpret the variation of measured gain with junction area in terms of an edge-enhanced electric field, and fit the data with a two-gain model having a lower interior gain and a higher edge gain. We report data for the excess noise factor F(M) near unity for gains up to 150 at 196 K. We describe the abrupt breakdown phenomenon seen in most of our devices at high reverse bias.     

HgCdTe MWIR Back-Illuminated Electron-Initiated Avalanche Photodiode Arrays

This paper reports data for back-illuminated planar n-on-p HgCdTe electron-initiated avalanche photodiode (e-APD) 4 × 4 arrays with large unit cells (250 × 250 μm²). The arrays were fabricated from p-type HgCdTe films grown by liquid phase epitaxy (LPE) on CdZnTe substrates. The arrays were bump-mounted to fanout boards and characterized in the back-illuminated mode. Gain increased exponentially with reverse bias voltage, and the gain versus bias curves were quite uniform from element to element. The maximum gain measured was 648 at −11.7 V for a cutoff wavelength of 4.06 μm at 160 K. For the same reverse-bias voltage, the gains measured at 160 K for elements with two different cutoff wavelengths (3.54 μm and 4.06 μm at 160 K) show an exponential increase with increasing cutoff wavelength, in agreement with Beck’s empirical model for gain versus voltage and cutoff wavelength in HgCdTe e-APDs. Spot scan data show that both the V = 0 response and the gain at V = −5.0 V are spatially uniform over the large junction area. To the best of our knowledge, these are the first spot scan data for avalanche gain ever reported for HgCdTe e-APDs. Capacitance versus voltage data are consistent with an ideal abrupt junction having a donor concentration equal to the indium concentration in the LPE film. U.S. Workshop on the Physics and Chemistry of II-VI Materials Newport Beach, California October 10–12, 2006.     

Constructing a SenseCam visual diary as a media process

The SenseCam is a small wearable personal device which automatically captures up to 2,500 images per day. This yields a very large personal collection of images, or in a sense a large visual diary of a person’s day. Intelligent techniques are necessary for effective structuring, searching and browsing of this image collection for locating important or significant events in a person’s life. In this paper we identify three stages in the process of capturing and structuring SenseCam images and then displaying them to an end user to review. These stages are expressed in terms of the Canonical process stages to which they correlate.     

An investigation of the reliability of Rapid Upper Limb Assessment (RULA) as a method of assessment of children's computing posture

Rapid Upper Limb Assessment (RULA) is a quick observation method of posture analysis. RULA has been used to assess children's computer-related posture, but the reliability of RULA on a paediatric population has not been established. The purpose of this study was to investigate the inter-rater and intra-rater reliability of the use of RULA with children. Video recordings of 24 school children were independently viewed by six trained raters who assessed their postures using RULA, on two separate occasions. RULA demonstrated higher intra-rater reliability than inter-rater reliability although both were moderate to good. RULA was more reliable when used for assessing the older children (8-12 years) than with the younger children (4-7 years). RULA may prove useful as part of an ergonomic assessment, but its level of reliability warrants caution for its sole use when assessing children, and in particular, younger children.