Evaluation of the frequency dependence of the resistance and capacitance standards in the BIPM quadrature bridge

The Bureau International des Poids et Mesures (BIPM) has established a measurement chain allowing calibration of capacitance standards in terms of the quantized Hall resistance (QHR). An important element in the chain is a quadrature bridge linking a pair of ac resistors of values 2R/sub K/ /spl ap/ 51.6 k/spl Omega/ to a pair of capacitance standards. The quadrature bridge can be operated at five different frequencies: 513, 1027, 1541, 3082, and 6164 Hz. For such measurements, we use different ratios (1/1, 4/1 and 1/4) for the main inductive voltage divider in the quadrature bridge and three different pairs of capacitors of values 3000, 2000, and 1000 pF. A calculable coaxial resistance of 1290.6 /spl Omega/ (R/sub K//20) is used as a reference to evaluate the frequency dependence of the 51.6-k/spl Omega/ resistances. This allows the calibration of capacitance standards at the five different frequencies. The measured frequency dependences of 10 and 100 pF capacitance standards are reported.     

Epidemiology and economic impact of heart failure in France

There are little epidemiological data available about heart failure in France, despite its considerable impact on the system of health care and the fact that this problem will become even more acute in the future. Here are some important statistics: in France, there are about 500,000 people suffering from heart failure with about 120,000 new cases every year. The incidence increases from 4% in men and 3% in women of 55 to 64 years of age to 50% in men and 85% in women of 85 to 94 years of age. The average age of diagnosis is 73.5 years: two thirds of patients are over 70 years of age. There are about 3.5 million consultations and 150,000 hospital admissions for heart failure per year. The average length of hospital stay is 11 days. There are more than 32,000 deaths per year from heart failure. The cost of treating heart failure represents more than 1% of total medical expenses. Heart failure is a major problem of public health which is on the increase. This should incite physicians to provide optimal treatment for those affected and to place greater emphasis on preventive measures.     

Enrichment of precooked white corn flour (Zea mays) with amaranth seed flour (Amaranthus sp.)

Three mixtures of precooked white corn flour with 10, 20 and 30% amaranth flour were prepared. The sedimentation and consistency of the mixtures differed from those of the white corn flour, but without altering the capacity of dough formation to prepare arepas. The protein, fiber, and ash contents were higher than those of the precooked white corn flour. The functional properties of water and oil absorption increased in 20 and 10%, respectively. During the three-month storage, the protein and fat contents were not altered. Acceptability tests of the arepas were carried out and results indicated that those mixtures prepared with 10% and 20% substitution levels were acceptable from the sensory point of view. The protein quality was analyzed in terms of protein efficiency ratio (PER), which proved to be higher than that of the commercial white corn flour (PER 1.93), and the apparent digestibility was 92%. As far as lysine is concerned, results showed that arepas prepared with the mixture containing 10% amaranth (1.6 g lysine/100 g protein) and 20% (2.0 g lysine/100 g protein) also proved to be higher than the commercial white corn flour arepas (0.7 g lysine/100 g protein). Based on the above findings, enrichment of commercial white corn flour with grain amaranth flour, prior to the preparation of arepas, a product of high consumption in Venezuela as part of the habitual diet, is recommended.     

Ultrasonic determination of the particle concentration in model suspensions and ice slurry

The development of ice slurry for refrigeration systems and the enhancement of its efficiency depend on an accurate control of the ice concentration. We present here an ultrasonic method capable to measure precisely the particle concentration in ice slurry. To calibrate the ultrasonic measurement, we first determine the sound velocity and attenuation in two model suspensions (glass beads/polyethylene glycol and polyethylene beads/vaseline oil) for different particle volume fractions. The experimental results show a good agreement with the predictions of the two-component models in the long-wavelength limit. Additionally, the sound attenuation reveals a clear signature of the aggregate formation in the nearly iso-dense suspension. We next conduct the measurement of the sound velocity in the polypropylene glycol ice slurry where the ice concentration changes with temperature. The ice concentrations extracted from our sound velocity measurements are well consistent with the values determined from the binary phase diagram.     

A difference-set cyclic code (1057,813,34)

This paper presents an overview of the implementation of a difference-set cyclic code (1057,813,34). It is easy to achieve coding and decoding circuits. The decoding lays on the analysis of the composite remainder R_c (x) and the use of a decoding matrix of 33 Boolean equations. The error-correcting algorithm has been improved, so the difference-set cyclic code (1057,813,34) can correct up to 26 random errors instead of the 16 previous random errors found by the theory. Moreover, 3 decoding algorithms have been simulated and allow the comparison of their respective efficiency. The hardware achievement is quite easy because the necessary logical elements such as shift delay registers, positive-and gates, positive-or gates, positive-exclusive-or gates exist as a set of libraries.     

Calcium channel inhibitors, nitrate derivative. Principles and rules of use

The hypothesis that it is the variability of a person's identity--as opposed to the particular combinations of identities--that produces stress during the acculturation process was examined. Two hundred ninety-five native Anglophone students at the University of Ottawa, Ontario, Canada, provided demographic data and completed the following measures: the Beck Depression Inventory (Beck & Beck, 1972), Rosenberg's Self-Esteem Scale (1965), the Situated Identity Measure (Clément & Noels, 1992), and the Psychological Stress Measure (Lemyre, Tessier, & Fillion, 1990). Results of ANOVAs contrasting level of identification and variability of identification indicated that an exclusively Anglophone identity was related to a higher level of depression, lower self-esteem, and a higher level of stress than the other modes of acculturation, but only when the variability in identity with the English group was high. Thus, the participants who identified strongly with the English group but were not committed to this identity experienced more psychological adjustment problems.     

Rat gonadotropin-releasing hormone receptor expressed in insect cells induces activation of adenylyl cyclase

The diagnostic usefulness of measuring plasma D-dimers using the ELISA method and the latex agglutination test has been prospectively evaluated in 117 patients hospitalized for suspicion of acute venous thrombo-embolism (AVTE): pulmonary embolism was suspected in 80 patients and the remaining 37 had a suspicion of deep vein thrombosis of the lower limbs. The diagnosis of AVTE was confirmed in 50% of the patients, all of whom underwent gold standard invasive investigation i.e. pulmonary angiography and/or contrast venography. The sensitivity, specificity, negative predictive value and positive predictive value of a D-dimers plasma concentration exceeding 500 ng/ml for the diagnosis of AVTE were respectively 98, 58, 97 and 70% when using the ELISA method, and 86, 71, 84 and 75% when using the latex assay. In 47 patients whose lung scans yielded abnormalities of indeterminate probability of pulmonary embolism, the sensitivity of the ELISA method was very high (94%), but that of latex assay was low (67%). Our results demonstrate that measuring the plasma D-dimers by the latex assay should not be used in the diagnosis of AVTE. On the other hand, the ELISA method might be of great interest in the diagnostic strategy of AVTE, as a normal concentration of D-dimers rules out almost definitely the diagnosis of AVTE, and hence, spares from performing invasive investigations.     

Mechanical behaviour of porous lanthanide oxide microspheres: Experimental investigation and numerical simulations

Actinide oxide microspheres are considered as promising substituents to powder precursors for the production of ceramic pellets of nuclear fuel or targets. Porous microspheres of sub-millimetric size are synthesised using the Weak Acid Resin process. Controlling their microstructure and their mechanical properties is essential to predict the microstructure of green compacts and sintered pellets. Here, cerium and gadolinium are used to mimic actinides as metal cation. Single microspheres are crushed experimentally using a micropress in a Scanning Electron Microscope (SEM) to investigate their mechanical properties and visualise their fracture behaviour. The results are compared to numerical simulations based on the Discrete Element Method (DEM). In DEM, a microsphere is modelled as an assembly of bonded spheres representing aggregates. Bonds may fracture in tension or shear. A limited number of material parameters (aggregate elastic modulus, bond strength) are sufficient for the accurate simulation of the fracture behaviour of a microsphere.     

Prospects for advanced electron cyclotron resonance and electron beam ion source charge breeding methods for EURISOL

As the most ambitious concept of isotope separation on line (ISOL) facility, EURISOL aims at producing unprecedented intensities of post-accelerated radioactive isotopes. Charge breeding, which transforms the charge state of radioactive beams from 1+ to an n+ charge state prior to post-acceleration, is a key technology which has to overcome the following challenges: high charge states for high energies, efficiency, rapidity and purity. On the roadmap to EURISOL, a dedicated R&D is being undertaken to push forward the frontiers of the present state-of-the-art techniques which use either electron cyclotron resonance or electron beam ion sources. We describe here the guidelines of this R&D.