Distribution of Etoposide-Loaded Hydrophilic Albumin Microspheres in Mice

Hydrophilic albumin microspheres of etoposide were prepared by the emulsion polymerization technique using glutaraldehyde as the cross-linking agent. The microspheres prepared had a mean diameter of 1.5 μm. The microspheres were injected into mice by the intravenous route. In all, 12 mice were selected for the study, out of which 10 were given the drug-loaded microspheres and 2 were kept as solvent control. The mice were sacrificed after 24 hr and the accumulation of drug was determined in lungs, liver, and kidney.     

Biowaste-derived hydroxyapatite reinforced with polyvinyl pyrrolidone/aloevera composite for biomedical applications

The present investigation focuses on the synthesis of crabshell-derived hydroxyapatite (CS-HAP)/ water-soluble synthetic polymer—polyvinylpyrrolidone(PVP)/aloevera(AV)—a natural biopolymer, as a composite for enhanced mechanical, antibacterial and biocompatible properties. The reinforcement of polymer has a significant function in increasing the mechanical property of the composite, whereas the incorporation of AV improves the antibacterial and biocompatibility. Phase composition, morphology, mechanical property, and hydrophilicity of CS-HAP/PVP/AV biocomposite with different concentrations of PVP and AV were examined by Fourier transform infrared spectroscopy (FTIR), X-Ray diffraction (XRD), scanning electron microscopy with energy dispersive X-ray (SEM-EDX), Vickers microhardness tests, contact angle, respectively. Furthermore, the antibacterial efficiency of the composite is assessed using Escherichia coli (E coli) and Staphylococcus aureus (S aureus). The biocompatibility of HOS MG 63 cells on the CS-HAP/PVP/AV composite is evaluated by MTT assay test. The obtained results evidence that the as-synthesized composite have appropriate mechanical, antibacterial and biocompatible properties. Overall, the combination of mechanical property of PVP, antibacterial and biocompatible property of AV in CS-HAP/PVP/AV, makes the composite a potential therapeutic material for various biomedical applications.     

Performance enhancement and energy reduction using hybrid cryogenic distillation networks for purification of natural gas with high CO2 content

A novel concept of hybrid cryogenic distillation network has been explored which maximizes the benefits of both desublimation or solid-vapor based separation as well as distillation or vapor-liquid equilibrium based separation during the separation of carbon dioxide from methane or natural gas. Process network synthesis has been performed for four case studies with high carbon dioxide (72 mole%) and medium carbon dioxide (50 mole%) natural gas feed streams. The benefits of optimal locations for cryogenic packed beds were investigated. A conventional cryogenic network consisting of multiple distillation columns with butane as additive for extractive distillation was also studied and presented in this paper. Process modeling of cryogenic distillation network with MESH equations was attempted using an integrated dual loop (C+3) convergence and the results were compared with Aspen Plus simulator for benchmarking. The prediction of solidification region was employed using experimental data from literature to avoid solidification regions in the column. The proposed hybrid cryogenic distillation network showed promising potential for energy and size reduction.     

Pungency threshold of capsaicin produced by in vitro culture of placental tissues of capsicum frutescens mill.

Production of capsaicin in free and immobilized placenta was compared in order to assess their capsaicin production ability. In immobilized placenta, maximum accumulation of capsaicin was on the 14th day of culture with a production of 2045 ug/culture, whereas in free placenta, the accumulation reached maximum on the 7th day (2050ug/culture). It was found that there was no significant difference between free and immobilized placenta in terms of capsaicin production, suggesting that immobilization is not necessary to enhance capsaicin accumulation in piacentai tissue. Pungency threshold of capsaicin produced in in vitro grown free piacentai tissues of Capsicum frutescens was done by Scoville heat units (SHU) method. Pungency analysis of capsaicin produced in free piacentai tissue showed that on day zero, pungency of tissue culture produced capsaicin (0.2267x10⁵ SHU) was comparable to standard natural capsaicin (0.222×10⁵ SHU), while on the 3rd day pungency of tissue culture produced capsaicin (0.3639×10⁵ SHU) was slightly lower than standard natural capsaicin (0.4415×10⁵ SHU).     

Nonliposomal approach--a study of preparation of egg albumin nanospheres containing amphotericin-B

The stability of liposomes after introduction into the body is presently being discussed and needs thorough understanding. Hence, as a nonliposomal approach, egg albumin nanospheres were prepared by the pH-coacervation method, and a preliminary study was carried out of the influence of process variables on the size and shape of nanospheres by changing the pH of the albumin solution, concentration of albumin solution, and volume of cross-linking agent. The batch prepared with an albumin medium of pH 9, 2% concentration, and 100 μl of 4% glutaraldehyde-ethanol solution was found to have a spherical uniform shape with an average size of 497.6 nm. The ideal batch was loaded with the systemic antifungal drug amphotericin-B. Drug-loaded nanospheres were evaluated to study their in vitro release. They were found to exhibit a biphasic pattern with a cumulative percentage release of 97.7%.     

Chemical Vapor Deposition of Silicon Carbide Epitaxial Films and Their Defect Characterization

A chemical vapor deposition (CVD) system was designed and fabricated in our laboratory and SiC homo-epitaxial layers were grown in the CVD process using silicon tetrachloride and propane precursors with hydrogen as a carrier gas. The temperature field was generated using numerical modeling. Gas flow rates, temperature field, and the gradients are found to influence the growth rates of the epitaxial layers. Growth rates were found to increase as the temperature increased at high carrier gas flow rate, while at lower carrier gas flow rate, growth rates were observed to decrease as the temperature increased. Based on the equilibrium model, “thermodynamically controlled growth” accounts for the growth rate reduction. The grown epitaxial layers were characterized using various techniques. Reduction in the threading screw dislocation (SD) density in the epilayers was observed. Suitable models were developed for explaining the reduction in the SD density as well as the conversion of basal plane dislocations (BPDs) into threading edge dislocations (TEDs).     

Protein engineering loops in aspartic proteinases: site-directed mutagenesis, biochemical characterization and X-ray analysis of chymosin with a replaced loop from rhizopuspepsin

The loop exchange mutant chymosm 155–164 rhizopuspepsinwas expressed in Trichoderma reesei and exported into the mediumto yield a correctly folded and active product. The biochemicalcharacterization and crystal structure determination at 2.5Å resolution confirm that the mutant enzyme adopts a nativefold. However, the conformation of the mutated loop is unlikethat in native rhizopuspepsin and involves the chelation ofa water molecule in the loop. Kinetic analysis using two syntheticpeptide substrates (six and 15 residues long) and the naturalsubstrate, milk, revealed a reduction in the activity of themutant enzyme with respect to the native when acting on boththe long peptide substrate and milk. This may be a consequenceof the different charge distribution of the mutated loop, itsincreased size and/or its different conformation.     

Numerical Technique for Resolving the Dual Phase Lag Heat Conduction in Thin Film Metal

Abstract

In this article, a three-time level finite difference scheme is used to resolve the dual phase lag’s (DPL) heat conduction in a micro scale gold film subjected to spontaneous temperature boundary conditions without knowing the heat flux. Finite difference analog of DPL equation on applying to the intermediate grid points of the computational domain results into a system of linear, algebraic equations which can be solved using Thomas’ algorithm to finally obtain the transient temperature solution distributions in the film. The solution predicted by the DPL model is compared with that obtained by the single-phase Cattaneo–Vernotte’s model. Further, the way in which non-Fourier’s temperature distributions affected by the diffusion due to the increase in Heat Conduction Model numbers agree with the predecessor’s published results. The results by both the models revealed a finite thermal wave speed in the film contrasting the infinite speed of heat propagation as stated by the classical Fourier’s thermal model. Low spatial step and higher order finite difference schemes are recommended for better accurate numerical results of the non-Fourier’s temperature distributions occurring in the very short transient period between the instants of the suddenly applied spatial temperature gradient and the reaching of the steady state conditions.     

Synthesis of fine-particle titanates by the pyrolysis of oxalate precursors

Fine-particle MTiO₃, where M=Ca, Sr, Ba or Pb, were prepared by the pyrolysis of MTiO(C₂O₄)₂·4H₂O in the presence of a redox mixture containing NH₄NO₃ and oxalic acid dihydrazide at 350 °C. The redox mixture, having a low ignition temperature, not only pyrolyses the oxalate precursor but also produces large quantities of gases, which results in a fine, foamy oxide product. The exothermicity of the redox reaction provides the heat required for the decomposition of the oxalate, and the gases evolved create the foamy nature of the product and help to dissipate the heat, which inhibits the sintering of MTiO₃. Metal titanate powders obtained by the pyrolysis of the oxalates are of submicrometre size and have a high surface area (18–42 m²g^–1). The sintered BaTiO₃ and PbTiO₃ showed spontaneous polarization of 12 and 26 µC cm^–2, respectively, for a field strength of 120 kV cm^–1.     

Defect analysis in crystals using X-ray topography

A brief review of X-ray topography--a nondestructive method for direct observation and characterization of defects in single crystals--is presented here. The origin and development of this characterization method and the different techniques derived from it are described. Emphasis is placed on synchrotron X-ray topography and its application in studying various crystal imperfections. Mechanisms of contrast formation on X-ray topographs are discussed, with emphasis on contrast associated with dislocations. Determination of Burgers vectors and line directions of dislocations from analysis of X-ray topographs is explained. Contrast from inclusions is illustrated, and their differentiation from dislocations is demonstrated with the aid of simulated topographs. Contrast arising from the deformation fields associated with cracks is also briefly covered.