Correlation of Structure and Photoelastic Response in Tin Phosphate Glass

Recently an empirical model was established to predict the photoelastic response of a glass based on its composition and the crystalline structure of its constituents. In the present work the model was tested in detail by comparing the local structure assessed by a combination of nuclear magnetic resonance and Mössbauer spectroscopy with the model predictions and the measured photoelastic response. The system investigated was (SnO)_x(P₂O₅)_1−x. It was found that while the original simple model based on data on the pure components predicted the composition of the zero stress-optic glass to within about 15 mol%, inclusion of data on mixed systems, more reflective of the true glass structure, gave substantial improvement of the prediction. This finding further confirms the relation of local bonding structure to the photoelastic response of glass.     

Grain Boundary Responses to Heterogeneous Deformation in Tantalum Polycrystals

The evolution of heterogeneous deformation in a tantalum polycrystal was examined during a three-point bending experiment using electron backscatter pattern mapping. Slip bands formed at strains as low as 1%, and they became more intense with strain. Heterogeneous deformation was evident as intragranular orientation gradients as large as 30° were observed after a strain of about 8%. Nonmonotonic changes in the local average misorientation distribution were observed, implying that dislocation substructure developed in a complex manner. Slip bands were analyzed using plane traces computed from local orientation information. With the assumption of uniaxial stress, Schmid factors for favorable slip systems were identified for each grain and compared with observations, showing evidence for macroscopic activity on both {110} and {112} slip systems. Reconstructed boundary data were used to estimate the geometric potential for slip transfer at grain boundaries. The correlations indicated that when active slip systems were favorably oriented for slip transfer across the boundary, it was often observed in the form of continuous slip bands aligned across the boundary. In boundaries where geometrical alignment and Schmid factors were not favorable for slip transfer, there was a higher likelihood to form ledges (topographic discontinuities) along the grain boundaries. Dislocation pileups at grain boundaries were also correlated with a low potential for slip transfer.     

Diets deficient in rumen undegraded protein did not depress milk production

The objective of this study was to evaluate the National Research Council's recommendations for feeding levels of rumen undegraded protein (RUP) for cows fed a one-group total mixed ration. Sixty Holstein cows were paired by parity (1 to 6) and DIM (23 to 315) and were randomly assigned to one of two treatment sequences. Diets contained alfalfa silage (30% diet DM) and corn silage (26% diet DM), and were isonitrogenous (16% CP) and isocaloric (1.71 Mcal/kg). Soybean meal, protected soybean meal (Soy Best), and urea were used to make ration protein fractions that were predicted to be 35 or 29% RUP. The 35% RUP diet was formulated to provide 98 and 105% of the average requirement for RUP and rumen degraded protein (RDP), respectively. The ration containing 29% RUP provided 79 and 117% of average required RUP and RDP, respectively. All cows were group-fed the high RUP diet during a 2-wk pretreatment period, and then were fed one ration for 4 wk followed by the other for 4 wk according to their assigned treatment sequence. Data were collected in the last wk of each period. Mean milk production, milk fat, and milk protein were 32.6 kg/d, 4.35%, and 3.36%, respectively, with no treatment differences. Treatment response was not affected by degree of predicted RUP deficiency. National Research Council requirements for RUP may be too high for cows fed diets similar in energy to a one-group total mixed ration. Alternatively, estimates of RUP content of feedstuffs may be low.     

Temperature dependence of Sb-heterostructure millimetre-wave diodes

The current against voltage characteristics of Sb-heterostructure zero-bias millimetre-wave diodes were measured from 15 to 81°C. No significant variation in the zero-bias junction resistance or curvature coefficient was found. The new diode is the first that provides temperature independent direct detection capability at and beyond W-band     

InAs/AlSb/GaSb resonant interband tunneling diodes andAu-on-InAs/AlSb-superlattice Schottky diodes for logic circuits

Integrated resonant interband tunneling (RIT) and Schottky diode structures, based on the InAs/GaSb/AlSb heterostructure system, are demonstrated for the first time. The RIT diodes are advantageous for logic circuits due to the relatively low bias voltages (~100 mV) required to attain peak current densities in the mid-10⁴ A/cm ² range. The use of n-type InAs/AlSb superlattices for the semiconducting side of Schottky barrier devices provides a means for tailoring the barrier height for a given circuit architecture. The monolithically integrated RIT/Schottky structure is suitable for fabrication of a complete diode logic family (AND, OR, XOR, INV)     

Utilization of digital image processing to study dynein arms (ATPase) in normal and immotile cilia

Tracheal ciliary cross sections were examined with scanning transmission electron microscopy and the resultant images were digitized for image enhancement. A gray-scale histogram of each ciliary image was produced and manipulated to enhance the image for dynein arms. Tracheal epithelial tissue from the pig, rabbit, and dog, including dogs with immotile cilia syndrome, was examined by using this technique. Tissue from each animal was fixed with each of three different fixatives and sections were evaluated for preservation of dynein arms. The same fixative did not consistently provide optimal fixation for ciliary dynein arms in all three species examined. Each species, therefore, must be evaluated to determine the optimal fixative for preservation of normal ciliary ultrastructure. Digital image processing provides a mechanism for enhancing dynein arms in situ without the need for addition of special stains or the use of techniques such as image summation. With this technique it has been shown that about two-thirds of outer dynein arms are partially or completely missing on cilia from dogs with immotile cilia syndrome.