Initial Stages in the Metal-dusting Process on Alloy 800

The initial stages of the metal-dusting process on Alloy 800 at 620 °C were investigated by light optical microscopy, RAMAN spectroscopy, atomic-force microscopy, Auger electron spectroscopy, transmission-electron microscopy and electron back-scatter diffraction. As it turned out the incubation period for metal-dusting is characterized by simultaneous formation of a heterogeneously growing oxide scale and deposition of carbon. The material surface shows different tarnish colors depending on the substrate-grain orientation with different susceptibility to the beginning of metal-dusting attack. “Low-index” grains were not attacked within the times investigated while the other grain orientations showed pitting. Carbon is evidently incorporated into the oxide scale from the very beginning of exposure with different intensities depending on the underlying substrate-grain orientation leading to differences in the tarnish colors. As a consequence carbides are formed even underneath “dense” oxide layers. Evidently metal-dusting attack starts at positions of the oxide scale where “higher carbon concentrations” are present.     

Computer optimization of trailer suspensionsOptimisation par ordinateur des suspensions de remorque

This paper presents an optimization procedure which has been developed to select appropriate suspension design parameters for a simple two wheel trailer. A modern approach to the optimization problem has been used applying non-linear programming to the constrained search for the minimum of an objective function. The acceleration response to roadway input of selected points on the load of the trailer has been designated for minimization. This acceleration has an important significance to the trailer design because of its effect on the stable and smooth ride of the trailer. Two computational procedures have been used and the results compared. The first approach involves the linear superposition of responses to a series of discrete sinusoidal inputs while the second applies more contemporary random vibration theory using power spectral density curves to simulate the actual road surfaces. The results of the optimization procedure are then compared with the response characteristics of the original trailer design and demonstrate that a substantial improvement has been made.     

Magnetron-sputtered cobalt-based protective coatings on ferritic steels for solid oxide fuel cell interconnect applications

Co, Co–Mn (67:33 at.%) and Co–Cu (67:33 at.%) coatings were fabricated using magnetron sputtering on two kinds of ferritic stainless steels (Crofer22APU and F17TNb) in order to form spinel protective coatings on metallic interconnects for solid oxide fuel cells. Despite the thickness unevenness at different regions, dense metallic coatings were successfully applied onto all necessary surfaces of the channelled interconnect substrates. Upon oxidation, spinel oxide coatings with very low Cr content were formed, reducing effectively the Cr release. Among the three protective coatings, Co–Cu coating showed the lowest area specific resistance (<15 mΩ cm² at 800 °C).     

The Effects of Embedded Dipoles in Aromatic Self‐Assembled Monolayers

Using a representative model system, here electronic and structural properties of aromatic self‐assembled monolayers (SAMs) are described that contain an embedded, dipolar group. As polar unit, pyrimidine is used, with its orientation in the molecular backbone and, consequently, the direction of the embedded dipole moment being varied. The electronic and structural properties of these embedded‐dipole SAMs are thoroughly analyzed using a number of complementary characterization techniques combined with quantum‐mechanical modeling. It is shown that such mid‐chain‐substituted monolayers are highly interesting from both fundamental and application viewpoints, as the dipolar groups are found to induce a potential discontinuity inside the monolayer, electrostatically shifting the core‐level energies in the regions above and below the dipoles relative to one another. These SAMs also allow for tuning the substrate work function in a controlled manner independent of the docking chemistry and, most importantly, without modifying the SAM‐ambient interface.     

Tuning the Electronic Structure of Graphene through Collective Electrostatic Effects

Electrostatically designing materials opens a new avenue for realizing systems with user‐defined electronic properties. Here, an approach is presented for efficiently patterning the electronic structure of layered systems such as graphene by means of collective electrostatic effects. Using density‐functional theory simulations, it is found that lines of polar elements can strongly modify the energy landscape of this prototypical 2D material. This results in a confinement of electronic states in specific regions of the sample and, consequently, in a local energetic shift of the density of states. The latter is also directly reflected in the details of the band structure of the electrostatically patterned sample. Finally, it is shown that the approach can also be successfully applied to other 2D materials such as hexagonal boron nitride, where the effects are predicted to be even more pronounced than in graphene.     

Herstellung von Phenolharzen unter Verwendung von Stärkeprodukten

Usage of Starchy Products for Preparation of Phenolic Resins. Incorporation of starches and starch hydrolysates in phenolic resins of novolak and resol type has been investigated via acid catalyzed dehydration to 5-hydroxymethylfurfural (HMF) in the presence of phenol and formaldehyde. Due to formation of HMF/phenol-condensates savings up to 40% phenol and 65% formaldehyde are possible in comparison to commercial resins. Besides very low amounts of residual monomers, curing is accelerated with increased carbohydrate incorporation, which can be used to reduce time consuming manufacturing processes. Especially starch hydrolysates with different average molecular weights can be used in a very flexible way to achieve special requirements like softening points, mol weight distributions, viscosities and curing behaviour.     

How indirect supportive digital help during and after solving physics problems can improve problem-solving abilities

This study investigates the effectiveness of computer-delivered hints in relation to problem-solving abilities in two alternative indirect instruction schemes. In one instruction scheme, hints are available to students immediately after they are given a new problem to solve as well as after they have completed the problem. In the other scheme, hints are only available as worked out problems after students have finished their solution. The instruction schemes are supplied by means of a web-based program, Physhint, which supports the development of strategic knowledge [Pol, H. J., Harskamp, E. G., & Suhre, C. J. M. (2008). The effect of the timing of instructional support in a computer-supported problem-solving program for students in secondary physics education. Computers in Human Behavior, 24, 1156–1178]. This program supports novice problem solvers while undertaking physics problems concerned with forces by providing hints structured in accordance with Schoenfeld’s episodes [Schoenfeld, A. H. (1992). Learning to think mathematically: Problem solving, metacognition, and sense making in mathematics. In D. A. Grouws (Ed.), Handbook of research on mathematics teaching (pp. 224–270). New York: McMillan Publishing].     

Minimum sodium nitrite levels for pinking of various cooked meats as related to use of direct or indirect-dried soy isolates in poultry rolls

The relationship between sodium nitrite level and pinking was investigated in cooked meats, as measured by panel color score, acetone extraction of NO-hemochrome, and instrumental redness values. Beef was less susceptible than poultry breast meat to nitrite-induced pinking. Minimum sodium nitrite level for pinking was 14, 4, 2, and 1 ppm for beef round, pork shoulder, turkey breast, and chicken breast, respectively. By regression analysis, minimum ppm nitrite for pinking=0.092 (ppm total pigment)+0.53 (R(2)=0.99). High levels of nitrate (>250 ppm as sodium nitrate) and nitrite (>45 ppm as sodium nitrite) were found in direct-dried (DD) soy isolates. Chicken breast rolls formulated with >2% DD soy were pink, but control rolls with 156 ppm sodium nitrate were not pink. Thus, it was concluded that nitrite was the primary pinking agent in DD soy. Indirect-dried (ID) soy isolates contained <11 ppm sodium nitrite, which was insufficient for pinking in poultry rolls.