Auswirkungen von Blitzschlägen auf 20-kV-Energiekabel

Recently appeared defects on high voltage cables have required an urgent evaluation of the impact of lightning strikes necessary. In some cases overvoltages between the copper wire screen of the cable and earth may appear which cause damages of the cablesheath. Field measurements with a classification of the voltage impulses at the copper wire screen have been made to evaluate the number of events. Additionally a numerical model was developed to study the effects of atmospheric discharges on underground cables with emphasis to the influence on the cablesheath. This numeric method was also applied to estimate the effectiveness of different protection arrangements. This contribution presents evaluation methods for overvoltages of cables and a model used firstly for calculating the stress caused by differential voltages and secondly to determinate the influence of protection measures.     

Thermography of aged contacts of high voltage equipment

New developments in diagnostic tools and systems are necessary for a reliable and economic evaluation of the condition of equipment in power systems. In a research project a tool for the condition of contacts of centre break disconnector, which is used under normal operation by the aid of a thermography measurement system, has been developed. In this paper, an overview about the laboratory investigation of the temperature load behaviour and the environmental influence on-site for new and aged disconnector contacts are given. A condition evaluation tool for contacts, which was the aim of the project, has been created. The basic method for the evaluation is presented, and also two additional easements for a fast identification of suspect contacts are presented. With this evaluation tool and the usage of a thermography based measuring system, a condition based maintenance strategy can be applied, whereby an early detection of damages is possible and so power quality and reliability increase.      

Erosion of unfilled elastomers by solid particle impact

The response has been studied of eight unfilled elastomers (four natural rubber compounds, epoxidized natural rubber ENR50, butyl rubber, polybutadiene and polyurethane) to erosion by 150 m silica sand at an impact velocity of 48 m sec^–1. All were tested at an impact angle of 30°, close to the impact conditions occurring in pipe bends, while two were also tested at 90°. Wide variations in erosion rate were observed between different rubbers. These differences did not correlate systematically with the nature of the base elastomer, glass transition temperature or mechanical properties such as hardness, tensile strength or ultimate tensile elongation, nor with resistance to abrasive wear. Good correlation was, however, found with rebound resilience. A high resilience tended to imply high erosion resistance, The erosion rate was found empirically to be proportional to the quantity (1 - fractional resilience) raised to the power 1.4. Different surface morphologies were found in specimens of high and low resilience after erosion at 30°. Finely spaced transverse ridges formed on high-resilience rubbers, whereas surface features on low-resilience rubbers showed no directionality. Preliminary conclusions are drawn about possible mechanisms of material removal.     

Investigation of transport phenomena in a hybrid ion exchange-electrodialysis system for the removal of copper ions

Hybrid ion exchange electrodialysis processes allow the removal of metal ions from dilute waste liquids and the recovery of more concentrated solutions. The work reported here was aimed at investigating the two steps in the treatment process, namely, adsorption of metal ions onto the packed bed of resin and electromigration (i.e., the transport of these ions in the complex system under the applied electrical field). The case of copper sulfate was investigated. Dowex resins with a cross-linking degree of 2 and 8% were used. The flux of copper through the resin bed and the current efficiency for ion transfer to the cathode compartment were determined as a function of potential gradient and copper ionic fraction in the bed. Apparent diffusion coefficients of Cu²⁺ in the overall system were deduced from the experimental data.     

Ca15(CBN)6(C2)2O- a new cubic structure type containing CBN-anions together with acetylide and oxo anions

Ca₁₅(CBN)₆(C₂)₂O contains CBN⁴⁻ anions as well as C₂⁻ units and isolated O²⁻ anions. The compound is obtained by heating a stoichiometric mixture of CaO, C and BN with an excess of Ca in sealed niobium ampoules to 1270 K. It crystallizes in the space group Ia d with a = 1656.84(9) pm. Preparation, crystal structure, NMR and IR-spectroscopic properties are discussed.     

Multi-scale stacked sequential learning

Sequential learning is the discipline of machine learning that deals with dependent data such that neighboring labels exhibit some kind of relationship. The paper main contribution is two-fold: first, we generalize the stacked sequential learning, highlighting the key role of neighboring interactions modeling. Second, we propose an effective and efficient way of capturing and exploiting sequential correlations that takes into account long-range interactions. We tested the method on two tasks: text lines classification and image pixel classification. Results on these tasks clearly show that our approach outperforms the standard stacked sequential learning as well as state-of-the-art conditional random fields.     

Total hip replacement with isoelastic prosthesis in animals (author's transl)

Uncemented fixation and low-fraction materials are the basis of this experiment. Plastics with an elasticity similar to the bone ("isoelasticity") show very propitious material qualities. The direct cementless incorporation of test bodies must be checked. In 63 sheep isoelastic total hip joints were implanted. After 2 till 51 weeks the animals were sacrificed and 44 specimen of hips and organs were explored macroscopically, radiologically, spherimetrically and histologically. The result was: 1. Plastic hip prosthesis are incorporated in the bone, but the boundary layer is built by a collagenous fiber tissue. 2. Loosening brings resoption of the bone and expansion of the structural changed soft tissue. 3. The transformation of the femoral cortex to osteoporosis is considered possibly as the consequence of an insufficient biological transfer of the weight. 4. Fractures of the femoral prosthesis-stem could not be observed. 5. The radiology allows at the pelvis prosthesis a concret statement concerning stability, on the femoral part a probable one. 6. The abrasion is minimal, the tissue reaction to abrasion products is unessential. 7. Small abrasion particles are carried of by the lymph tract and stored in the first regional gland. A more distant spreading is not demonstrable.     

Capture of carbon dioxide by an ion-exchange resin: Influence of gas humidity on capture mechanisms

This paper evaluates moisture content effects on CO₂ capture of an ion-exchange resin (IER) functionalised with a primary amine group. IER capacities were determined by breakthrough with an inlet gas containing 10 vol% CO₂, nitrogen and various moisture contents. Three types of behaviour were identified according to humidity level. In saturated air conditions, the stoichiometry could be justified by carbonates and bicarbonates fixation. In dry conditions, we suspect a joint physical adsorption and reaction mechanism. For intermediate humidity, the stoichiometry of 1 CO₂ for 1 amine group is consistent with a bicarbonate fixation or carbamic acid formation.     

Online error correcting output codes

This article proposes a general extension of the error correcting output codes framework to the online learning scenario. As a result, the final classifier handles the addition of new classes independently of the base classifier used. In particular, this extension supports the use of both online example incremental and batch classifiers as base learners. The extension of the traditional problem independent codings one-versus-all and one-versus-one is introduced. Furthermore, two new codings are proposed, unbalanced online ECOC and a problem dependent online ECOC. This last online coding technique takes advantage of the problem data for minimizing the number of dichotomizers used in the ECOC framework while preserving a high accuracy. These techniques are validated on an online setting of 11 data sets from UCI database and applied to two real machine vision applications: traffic sign recognition and face recognition. As a result, the online ECOC techniques proposed provide a feasible and robust way for handling new classes using any base classifier.     

Nonbacterial osteomyelitis of the clavicle

Osteomyelitis can be subdivided into a bacterial exogenic (post-traumatic/postoperative), bacterial endogenic (hematogenous) and an abacterial type, including the rare group containing primary chronic sclerosing osteomyelitis, which is typically localized in the clavicle. In a review of the literature, the criteria for the various types of chronic sclerosing osteomyelitis are analyzed. Out of a group of 17 patients with osteomyelitis of the clavicle treated between 1978 and 1996, three cases of primary chronic sclerosing osteomyelitis are demonstrated. In the differential diagnosis, primary chronic sclerosing osteomyelitis of the clavicle has to be taken into consideration despite its rareness. After establishing a diagnosis by biopsy, in contrast to the other forms, drug therapy will be the treatment of choice and not an operation.