Segmented polymer networks containing amino‐dendrimers

Polymer networks in which poly(propylene imine) dendrimers (Astramol?) are connected to each other by linear polytetrahydrofuran (polyTHF) segments, were prepared by two methods. The first method was a one‐step procedure in which bifunctionally living polyTHF, obtained by initiation of the THF polymerization with trifluoromethane sulfonic anhydride (triflic anhydride), was reacted with an amino‐dendrimer. This reaction was very fast but did not allow formation of the end products. The second method was a two‐step procedure. In a first step, living polyTHF, prepared with acryloyloxybutyl triflate as initiator, was grafted on an amino‐dendrimer, to form a star‐like, acrylate‐terminated polyTHF multi‐macromonomer with the dendrimer as core. In a second step, networks were obtained by Michael addition between the acrylate end‐groups and unreacted amino‐groups of the dendrimer. This cross‐linking reaction occurred spontaneously upon heating of the solution of the multi‐macromonomer with gelation times varying from a few minutes to a few hours, depending on the temperature and the composition of the prepolymers. With this method it was possible to prepare networks in the form of coatings or films. © 2003 Society of Chemical Industry     

Polymer networks based on α,ω-methacrylate-terminated poly(1,3-dioxolane)

α,ω-Methacrylate-terminated poly(1,3-dioxolane)s (polyDXL) were synthesized by cationic ring-opening polymerization of DXL in the presence of methylene-bis(oxyethylmethacrylate) as transfer agent. If the initiator concentration is small compared with the transfer agent concentration, the molecular weights of the polymers are governed by the ratio of the reacted monomer to the reacted transfer agent. The α,ω-methacrylate-terminated polyDXLs obtained undergo free radical polymerization with formation of polyacetal networks. The properties of the networks as function of the molecular weight of the corresponding prepolymers are reported.     

Water-Quality Monitoring in Anguilla

Anguilla is a UK overseas (non-independent) territory in the Caribbean. It is a small middle-income island with a population of 13 000, and recent statistics indicate that it is more dependent on tourism than any other country or territory in the world. Rapid population growth and development have placed more emphasis on the need for human health and environmental protection. For the first time, a systematic water-quality monitoring programme has been developed, based on the realities of the local situation, e.g. low resource base, limited capabilities, dependence on household rainwater catchment, storage cisterns, and a poor water-supply network. Development of the programme incorporated the key themes of pragmatic, realistic, incremental, responsive, and consultative approaches.     

用于制导弹药的自适应自动驾驶仪设计

传统制导弹药自动驾驶仪的设计要求精确的气动模型,并依赖于变增益(gainschedule),以说明系统的非线性.本文给出了一种简化自动驾驶仪设计程序的方法:在单一飞行条件下设计逆控制器,将逆控制器与在线神经网络组合,以说明因近似逆引起的误差,这样减少了大量设计程序及精确的气动数据.这些数据在大攻角或其它情况下很重要,因为这些领域中的空气动力特征变得高度非线性化.研究发现:逆的选择在其实现的过程中很重要,所以详细讨论.最后,给出该方法在非线性6自由度制导弹药中的模拟结果.     

Analysis of a stiffener intersection eccentricity in a steel containment

Containment structures have several regions in which the continuity of the cylindrical pressure boundary is interrupted, e.g., shell penetrations, discontinuous stiffeners, and changes in the shell thickness. Significant strain concentrations can occur in these areas of discontinuity. The Sandia National Laboratories 1:8-scale steel containment equipment hatch was analyzed as an example of an eccentricity at a stiffener intersection.A portion of the as-built 1:8-scale model was modeled with the ANSYS general purpose finite element program using triangular, thin shell finite elements. The overall size of the model was determined from Saint-Venant type considerations of the stress field around the hatch. Shell elements were used to model the ring and formed stiffeners. Geometric and material nonlinear behavior were included. The model was loaded using discrete load steps up to a pressure of 165 psig. At this pressure, the maximum strain was 19.7 percent in the formed stiffener near its intersection with the ring stiffener. The finite element solution demonstrated the very localized nature of the strain field near the ring/formed stiffener intersection.In an attempt to reduce analysis costs, a small portion of the 1:8-scale model immediately surrounding the ring/formed stiffener intersection was selected for further analysis. Two smaller models, a ring/formed stiffener intersection and a ring/circular stiffener intersection, were studied. The models were significantly smaller than the regions used previously. A comparison of the two intersection models showed that the circular stiffener is a more efficient configuration.     

Effect of refraction on optical microscopic measurement of internal blood-vessel diameter and its correction

In optical microscopic measurement of internal blood-vessel diameters, the effect of refraction must be taken into account to ensure accuracy of the result. This effect is discussed and an analytical correction formula derived. Phantom blood vessels with known internal and external diameters were used to test the validity of the correction formula. The errors obtained prior to correction were reduced significantly after correction.     

Structural characterisation of apatite coatings

The current, most frequently employed, commercial route to produce hydroxyapatite prosthetic coatings is plasma spraying. However, this has several important limitations especially for textured surfaces. Low temperature methods of coating fabrication such as cathodic electrodeposition are attractive alternatives. However, quantitative characterisation of the phase composition of thin electrodeposited coatings can be problematic. An X-ray diffraction method, which provides quantitative compositional information without reference to external or internal standards, is introduced and validated. The method can also be applied when Bragg peaks from the supporting substrate are apparent within the data and preferred orientation can be tolerated. This method has been used to examine in detail the microstructure of electrodeposited coatings which are compared directly with those formed by a commercial plasma spraying process.We show that, unlike the plasma sprayed coatings, the electrodeposited material consists of a single crystalline phase (hydroxyapatite) and a significantly reduced amorphous phase. The electrodeposited coatings also possess significantly more microstrain and a smaller crystallite size than the corresponding plasma sprayed material.     

Characteristics of Milk Powders Produced by Spray Freeze Drying

Skim and whole milk powders were manufactured at lab scale by spray freeze drying (SFD), using liquid nitrogen as the cryogen. The polydispersity of droplet/particle sizes was limited using an encapsulator nozzle to atomize the feed. Particle morphology was examined using a scanning electron microscope. Samples were compared with equivalent spray-dried powders in tests of wettability and dissolution in water. The spray freeze-dried powders were found to be highly porous, with a uniform structure of pores throughout the entire particles. When tested in water, SFD skim milk powders wetted roughly three times as fast as industrially spray-dried agglomerated skim milk powders and were observed to dissolve rapidly by breaking down into smaller particles.