Indicators for inspection and maintenance planning of concrete structures

Based on an idea introduced by Benjamin and Cornell (1970. Probability, statistics and decision for civil engineers. New York: McGaw Hill) and previous works by the authors it is demonstrated how condition indicators may be formulated for the general purpose of quality control and for assessment and inspection planning in particular. The formulation facilitates quality control based on sampling of indirect information about the condition of the considered components. This allows for a Bayesian formulation of the indicators whereby the experience and expertise of the inspection personnel may be fully utilized and consistently updated as frequentistic information is collected. The approach is illustrated on an example considering a concrete structure subject to corrosion. It is shown how half-cell potential measurements may be utilized to update the probability of excessive repair after 50 years. Furthermore in the same example it is shown how the concept of condition indicators might be applied to develop a cost optimal maintenance strategy composed of preventive and corrective repair measures.     

Thermoreversible Gelcasting: A Novel Ceramic Processing Technique

A new ceramic processing method, thermoreversible gelcasting (TRG), has been developed. The method uses a gelation process that can be reversed multiple times. Two Al₂O₃ systems have been explored with the use of a specific triblock copolymer to form a binding gel network. The mixture becomes a free-flowing liquid on heating above 60°C. However, on cooling below 60°C, the slurry instantaneously transforms to a physical gel. This process can be reversed easily (essentially with an infinite processing time window) while the solvent is present in the system, which is advantageous when trying to produce high-quality dense pieces if initial casting irregularities occur. Near-theoretically dense specimens have been produced with properties consistent with reported values of high-density Al₂O₃.     

Can radioactive iodine be used in the treatment of diffuse non-toxic goiter?

Traditional treatment modalities of diffuse nontoxic goitre are thyroid hormone suppression or surgery. When treating nodular nontoxic goitre with 131I treatment, a reduction in thyroid volume to about 50% is seen. In the present study we evaluated the effect of 131I treatment in 21 patients treated for a diffuse nontoxic goitre and followed by evaluation of thyroid volume measured by ultrasound. Thyroid volume declined in all patients from median of 66 ml (range 27-160 ml) to 21 ml (9-108 ml) over a year, a reduction of 62%. Three patients developed hypothyroidism in the follow-up period (14%), one of these had a temporary hyperthyroid fase. In conclusion, 131I treatment of diffuse nontoxic goitre reduces thyroid volume by approximately 60% within 12 months. Hypothyroidism developed in 14% during a limited follow-up period.     

The small-cell variant of mycosis fungoides. A clinicopathological and quantitative electron microscopic study on 14 patients

Small-cell variants of Sézary syndrome and mycosis fungoides (MF) have been described. However, in these studies the nuclear area of the small-cell variant of MF (SC-MF) as compared to histological classical MF (CL-MF) was not characterized objectively by quantitative electron microscopy. In a 14-year follow-up period, of a total of 76 patch/plaque stage MF patients seen in the Department of Dermatology of the University Hospital Utrecht, 14 (18%) had an infiltrate composed of atypical lymphocytes characterized by a distinctly smaller cell diameter and smaller, hyperchromatic, deeply indented nuclei as compared to the usual cell type of MF. The aim of the investigation was to confirm this observation objectively using quantitative electron microscopy (morphometry) and to define SC-MF as compared to CL-MF. The study was performed on the 14 patients with SC-MF, and 10 patients with clinical and histological CL-MF and 4 patients with chronic eczema. Electron micrographs of sections obtained from each biopsy were analysed by computer to produce the following data: a nuclear contour index (NCI), the mean nuclear area (MNA), the mean nuclear area of the cells above the 75th percentile (P75NA) and the percentage of cells larger than 30 microm2. The values of MNA differed significantly between patients with SC-MF and those with CL-MF (17.6 vs 23.2 microm2; P = 0.02), as did the values of P75NA (20.7 vs 27.9 microm2; P = 0.01). The NCI of the SC-MF and CL-MF patients were similar. These results are consistent with our observations that SC-MF does indeed exist.     

Feature detection in 3-d medical images using shape information

Three methods for identifying the left ventricular apex in 3-D medical images of the heart called gated blood pool tomograms were investigated. The first method assumed a known orientation and positioning of the entire blood pool. The second and third methods used shapes described by quadratic surfaces, which are invariant to position and orientation. The first method performed best when the blood pool was accurately oriented, but as expected, could not handle blood pools in the wrong orientations. The quadratic surface methods performed well whether or not the blood pool was accurately oriented. The best quadratic surface method predicted the x, y, z value of the apex with correlations of 0.97, 0.98, 0.99.     

Thermal Conductivity,Phase Stability,and Oxidation Resistance of Y3Al5O12 (YAG)/Y2O3–ZrO2 (YSZ) Thermal-Barrier Coatings

This paper describes a new multilayer TBC that incorporates a 10 μm-thick oxygen barrier layer of yttrium–aluminum garnet (YAG) into a typical YSZ TBC system. The thermal conductivity of as-sprayed YAG/YSZ coatings was reduced due to excessive porosity and amorphous areas in the YAG layer. After long-term heat treatments, the conductivity of the multilayer was unaffected by the presence of YAG. Sintering and recrystallization of the amorphous YAG regions occurred during high-temperature heat treatments. While YAG itself possesses excellent phase stability, its presence also improved the phase stability of zirconia near the YAG/YSZ interface, inhibiting the outward diffusion of yttrium from high-yttria t-ZrO₂ The YAG layer reduced the NiCoCrAlY bond-coat oxidation rate by a factor of three during isothermalfurnace tests conducted at 1200° C.     

Effect of block weight on work demands and physical workload during masonry work

The effect of block weight on work demands and physical workload was determined for masons who laid sandstone building blocks over the course of a full work day. Three groups of five sandstone block masons participated. Each group worked with a different block weight: 11 kg, 14 kg or 16 kg. Productivity and durations of tasks and activities were assessed through real time observations at the work site. Energetic workload was also assessed through monitoring the heart rate and oxygen consumption at the work site. Spinal load of the low back was estimated by calculating the cumulated elastic energy stored in the lumbar spine using durations of activities and previous data on corresponding compression forces. Block weight had no effect on productivity, duration or frequency of tasks and activities, energetic workload or cumulative spinal load. Working with any of the block weights exceeded exposure guidelines for work demands and physical workload. This implies that, regardless of block weight in the range of 11 to 16 kg, mechanical lifting equipment or devices to adjust work height should be implemented to substantially lower the risk of low back injuries.     

Implementation of physical coordination training and cognitive behavioural training interventions at cleaning workplaces--secondary analyses of a randomised controlled trial

This study evaluates the implementation of physical coordination training (PCT) and cognitive behavioural training (CBTr) interventions in a randomised controlled trial at nine cleaners' workplaces. Female cleaners (n = 294) were randomised into a PCT, a CBTr or a reference (REF) group. Both 12-week interventions were performed in groups guided by an instructor. Records were kept on intervention dose (adherence) unanticipated events at the work place (context) and quality of intervention delivery (fidelity). Participant adherence was 37% in the PCT and 49% in the CBTr interventions. Optimal implementation was reached by only 6% in PCT and 42% in the CBTr. Analysis of the barriers to successful implementation indicated that the intervention process is sensitive to unanticipated events. In order to succeed in improving the health of high-risk populations such as cleaners and to correctly interpret intervention effects, more research on implementation is needed. Trial registration: ISRCTN96241850. PRACTITIONER SUMMARY: Both physical coordination training and cognitive behavioural training are potential effective workplace interventions among low educated job groups with high physical work demands. However, thorough consideration should be given to feasibility in the design of interventions. The optimal intervention should be tailored to closely match the implementation context and be robust and flexible to minimise susceptibility to changes in work organisation.     

23Na microscopy of the mouse heart in vivo using density-weighted chemical shift imaging

The mouse has become an important animal model for human cardiac disease, and the development of techniques for non-invasive imaging of the mouse heart in vivo is, therefore, of great potential interest. Previous magnetic resonance imaging studies have concentrated on pathologically induced changes in cardiac structure and dynamics by acquiring proton images. Further information can be gained by studying cardiac function and physiology using other nuclei, for example, sodium. Sodium imaging of such a small structure presents considerable technical challenges. In this work we show the first sodium images of the mouse heart, with an isotropic spatial resolution of 1 × 1 × 1 mm, acquired in a time of 1.5 h. The ventricles, septum and myocardium are readily distinguishable in these images, which were acquired through the combination of 3D density-weighted chemical shift imaging, optimized instrumentation, and a high magnetic field strength (17.6 T). Measurements of the myocardial:blood sodium concentration in the left and right ventricles agree well with theoretical values.