Strain-specific polyketide synthase genes of Aspergillus niger

In silico comparison of 34 putative pks genes in Aspergillus niger strain CBS 513.88 versus A. niger strain ATCC 1015 genome revealed significant nucleotide identity (>95% covering a minimum of 99% of the gene sequence) for 31 of these genes (approximately 91%). A. niger CBS 513.88 harbors three putative pks genes (An01g01130, An11g05940, and An15g07920), for which nucleotide identity was not found in A. niger ATCC 1015. To compare the results of the in silico analysis with the in vivo situation, experimental data were obtained for a large number of A. niger strains obtained from different substrates and geographical regions. Three putative pks genes that were found to be variable between the two A. niger strains using bioinformatics tools were in fact strain-specific genes based on experimental data. The PCR amplification signals for the An01g01130, An11g05940, and An15g07920 pks genes were detected in only 97%, 71%, and 26% of the strains, respectively. Southern blot analyses confirmed the PCR data. Because one of the strain-specific pks genes (An15g07920) is located in a putative ochratoxin cluster, we focused our investigation on that region. We assessed the ochratoxin production capability of the 119 A. niger strains and found a positive association between the presence of this pks gene and the capability of the respective strain to produce ochratoxin.     

Parameters effect on proton conductivity to obtain chitosan membranes for use as electrolytes in PEMFC

The chitosan biopolymer can be used as a proton‐conducting membrane in proton‐exchange membrane fuel cell. In the forms that they have normally obtained and tested, chitosan membranes typically show poor performance in conduction of protons, requiring modifications in the structure of the biopolymer or blending with other polymers to increase its proton conductivity. The present work investigates the individual properties of chitosan and relates them to the proton conductivity performance of membranes composed of this polymer. Evaluation was made of the effects of variables such as the degree of deacetylation (DD) and the molar mass (Mv) of chitosan membranes without addition of any other polymer. The DD and Mv values of the chitosan used to produce membranes determined the proton conduction, with lower DD and higher Mv resulting in higher conductivity. The thicker membranes presented greater crystallinity, with conductivity between 2.0 × 10^?4 and 1.8 × 10^?3 S cm^?1. The characteristic stages of degradation of the chitosan membranes were in the ranges 200 to 300°C and 500 to 600°C, indicating good thermal stability of the material.     

Speckle interferometry measurements of the conductor displacementsin the CERN-LHC main dipole

Magnetic field quality in superconducting magnets strongly depends on conductor position in operational conditions. Simulations based on finite-element models (FEM) provide the field of stresses and displacements inside the magnet. Due to the complex mechanical behavior of the coil and to the different materials composing the magnet, it is not trivial to build a reliable mechanical model. We present an experimental method based on optical measurements to validate the accuracy of the FEM in evaluating differential displacements at room temperature. A short sample of dipole coils is loaded through a small press and speckle interferometry measurements detect differential displacements with an accuracy of 1.5 μm. Comparison with the numerical results allows the testing of the most critical features of the model, i.e., a pressure-dependent coil elasticity and the interfaces between different materials. A good agreement between measurements and deformed geometry foreseen by the FEM is found     

Mechanical design of a second generation LHC IR quadrupole

One of the proposed options to increase the LHC luminosity is the replacement of the existing inner triplets at the interaction regions with new low-beta larger aperture quadrupoles operating at the same gradient. Lawrence Berkeley National Laboratory (LBNL) is carrying out preliminary studies of a large-bore Nb/sub 3/Sn quadrupole. The mechanical design presents a support structure based on the use of keys and bladders without self-supporting collars. This technology has been proven effective in several successful common coil Nb/sub 3/Sn dipoles built at LBNL, and it is for the first time applied to a cos(2/spl thetav/) design. In this paper, we present a detailed analysis of the quadrupole mechanical behavior, demonstrating the possibility of delivering, through this method, well-controlled coil pre-compression during assembly, cool-down and excitation. The study has been performed with the finite element program ANSYS.     

Reuse of treated municipal wastewater in irrigation: a case study from Lebanon and Jordan

In this study, we present the results of scenarios where secondary‐treated municipal wastewater was used for table grapes irrigation in the region of Ablah, Bekaa valley in Lebanon, and fodder crops irrigation (vetch and barley) in the region of Ramtha in Jordan. In Lebanon, we carried out experiments to assess the response of drip‐irrigated table grapes grown under two water quality regimes (Freshwater (FW) and treated wastewater (TW) and two water levels (100% of evapotranspiration (ETc) and 75% of ETc). While in Jordan, we carried out experiments to assess the response of drip‐irrigated fodder crops considering 4 irrigation levels (Q1: Rain fed; Q2: 80% of ETc; Q3: 100% of ETc; Q4: 120% of ETc) and three crop patterns (C1: Barley 100%; C2: Vetch 100%; C3: Mix 50% barley and 50% vetch). Based on the production and quality components, table grapes were successfully grown on plots that are supplied with TW. Fodder crops were successfully grown using TW with remarkable increase in biomass and grain yield production for the irrigated treatments.     

Thermomechanical properties of the coil of the superconducting magnets for the Large Hadron Collider

The correct definition and measurement of the thermomechanical properties of the superconducting cable used in high-field magnets is crucial to study and model the behavior of the magnet coil from assembly to the operational conditions. In this paper, the authors analyze the superconducting coil of the main dipoles for the Large Hadron Collider. They describe an experimental setup for measuring the elastic modulus at room and at liquid nitrogen temperature and for evaluating the thermal contraction coefficient. The coils exhibit strong nonlinear stress-strain behavior characterized by hysteresis phenomena, which decreases from warm to cold temperature, and a thermal contraction coefficient, which depends on the stress applied to the cable during cooldown.     

Mineral phases of green liquor dregs, slaker grits, lime mud and wood ash of a Kraft pulp and paper mill

Four residues generated in a Kraft, pulp and paper plant, were characterized by X-ray fluorescence spectroscopy (XFA), powder X-ray diffraction (XRD), thermogravimmetric analysis (TG) and Fourier transform infrared spectroscopy (FTIR). A quantitative phase composition model, that accounts for the observed data and for the physico-chemical conditions of formation, was postulated for each material. Emphasis was given on the identification of the mineral components of each material. The green liquor dregs and the lime mud contain Calcite and Gipsite. The slaker grits contains Calcite, Portlandite, Pirssonite, Larnite and Brucite. The Calcite phase, present in the dregs and in the lime mud, has small amounts of magnesium replacing calcium. The wood ash contains Quartz as the major crystalline mineral phase.     

Concept for a fourth generation electron cyclotron resonance ion source

A fourth generation electron cyclotron resonance ion source with an operating frequency between 40 and 56 GHz has the potential to quadruple the heavy-ion beam currents and provide a cost effective upgrade path for heavy ion drivers in use or in the planning stage at radioactive beam facilities. Design studies show it is feasible to produce the required magnetic fields in the plasma chamber, 7 T axially and 4 T in the radial direction with a magnetic structure using commercially available Nb(3)Sn superconducting materials. In this paper we describe the design of such a magnet structure including a 3D analysis of the Lorentz forces generated by the magnetic fields and the necessary clamping structure to stabilize the conductor against these forces.     

Finite element model of training in the superconducting quadrupole magnet SQ02

This paper describes the use of 3D finite element models to study training in superconducting magnets. The simulations are used to examine coil displacements when the electromagnetic forces are cycled, and compute the frictional energy released during conductor motion with the resulting temperature rise. A computed training curve is then presented and discussed. The results from the numerical computations are compared with test results of the Nb₃Sn racetrack quadrupole magnet SQ02.     

Analysis of voltage signals from superconducting accelerator magnets

We present two techniques used in the analysis of voltage tap data collected during recent tests of superconducting magnets developed by the Superconducting Magnet Program at Lawrence Berkeley National Laboratory. The first technique was used on a quadrupole to provide information about quench origins that could not be obtained using the time-of-flight method. The second technique illustrates the use of data from transient flux imbalances occurring during magnet ramping to diagnose changes in the current-temperature margin of a superconducting cable. In both cases, the results of this analysis contributed to make improvements on subsequent magnets.