Hall current effects on MHD flow of chemically reacting fluid through a porous medium with heat source

We considered the magnetohydrodynamic (MHD) free convective flow of an incompressible electrically conducting viscous fluid past an infinite vertical permeable porous plate with a uniform transverse magnetic field, heat source and chemical reaction in a rotating frame taking Hall current effects into account. The momentum equations for the fluid flow during absorbent medium are controlled by the Brinkman model. Through the undisturbed state, both the plate and fluid are in a rigid body rotation by the uniform angular velocity perpendicular to an infinite vertical plate. The perpendicular surface is subject to the homogeneous invariable suction at a right angle to it and the heat on the surface varies about a non-zero unvarying average whereas the warmth of complimentary flow is invariable. The systematic solutions of the velocity, temperature, and concentration distributions are acquired systematically by utilizing the perturbation method. The velocity expressions consist of steady-state and fluctuating situations. It is revealed that the steady part of the velocity field has a three-layer characteristic while the oscillatory part of the fluid field exhibits a multi-layer characteristic. The influence of various governing flow parameters on the velocity, temperature, and concentration are analyzed graphically. We also discuss computational results for the skin friction, Nusselt number, and Sherwood number in the tabular forms.     

Carbon-based TiO2-x heterostructure nanocomposites for enhanced photocatalytic degradation of dye molecules

Application of brown titanium dioxide (TiO_2-x) and its modified composite forms in the photocatalytic decomposition of organic pollutants in the environment is a promising way to provide solutions for environmental redemption. Herein, we report the synthesis of effective and stable TiO_2-x nanoparticles with g-C₃N₄, RGO, and multiwalled carbon nanotubes (CNTs) using a simple hydrothermal method. Among all the as-synthesized samples, excellent photocatalytic degradation activity was observed for RGO-TiO_2-x nanocomposite with high rate constants of 0.075 min^?1_, 0.083 min^?1 and 0.093 min^?1 for methylene blue, rhodamine-B, and rosebengal dyes under UV–Visible light irradiation, respectively. The altered bandgap (1.8 eV) and the large surface area of RGO-TiO_2-x nanocomposite impacts on both absorption of visible light and efficiency of photogenerated charge electron (e^?)/hole (h⁺) pair separation. This resulted in enhanced photocatalytic property of carbon-based TiO_2-x nanocomposites. A systematic study on the influence of different carbon nanostructures on the photocatalytic activity of brown TiO_2-x is carried out.     

Prediction of the maximum spoutable height in spout-fluid beds

The development of the semi-theoretical correlation in Hadzisdmajlovic et al. (1983) for predicting the maximum spoutable height in a spout-fluid bed, is observed to involve certain discrepancies. Based on their experimental data, a new correlation is proposed.     

Chemical control of superconducting properties of (Y,Ca)(Sr,Ba)2Cu2.7Ga0.3O7−δ

The partial substitution of Ga at the Cu(1) (chain) sites of the YBa₂Cu₃O₇ structure allows synthesis at ambient pressure of Ba-free analogs, e.g., YSr₂Cu_2.7Ga_0.3O_7?δ . Materials with this composition have been found to be nonsuperconducting, but superconductivity has been induced by one or more of the following methods: Ca substitutions at the Y site; Ba substitutions at the Sr site; annealing in high-pressure oxygen. The influence of these chemical manipulations onT _c has been monitored and all methods have been found to enhanceT _c . The electronic effects of Ba substitutions have been deduced indirectly using powder neutron diffraction, and such substitutions appear to result in a redistribution of hole density into the Cu(1) sites from the superconducting CuO₂ planes.     

Properties of ligno‐cellulose fiber Hildegardia

Studies on some properties such as the density, the degradation temperatures, the morphology and the spectral features of the ligno‐cellulose fiber Hildegardia were carried out in both untreated and alkali treated form. The fibers are found to have good morphology and moderate initial and final degradation temperatures. On alkali treatment, the lignin was found to be eliminated. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 2216–2221, 2002     

Sol-gel processing: A versatile concept for special glasses and ceramics

The various parameters related to sol-gel processing are discussed with special reference to those which usually attract less attention but depending on the final product in mind, can play important roles. The versatility of the sol-gel technique in materials preparation is demonstrated by discussing the various products developed at the author’s laboratory by using this processing method.     

Microstructural effects on the tensile properties and deformation behavior of a Ti-48Al gamma titanium aluminide

The effects of microstructure on the tensile properties and deformation behavior of a binary Ti-48Al gamma titanium aluminide were studied. Tensile-mechanical properties of samples with microstructures ranging from near γ to duplex to fine grained, near- and fully-lamellar were determined at a range of temperatures, and the deformation structures in these characterized by transmission electron microscopy (TEM). Microstructure was observed to exert a strong influence on the tensile properties, with the grain size and lamellar volume fraction playing connected, but complex, roles. Acoustic emission response monitored during the tensile test revealed spikes whose amplitude and frequency increased with an increase in the volume fraction of lamellar grains in the microstructure. Analysis of failed samples suggested that microcracking was the main factor responsible for the spikes, with twinning providing a minor contribution in the near-lamellar materials. The most important factor that controls ductility of these alloys is grain size. The ductility, yield stress, and work-hardening rate of the binary Ti-48Al alloy exhibit maximum values between 0.50 and 0.60 volume fraction of the lamellar constituent. The high work-hardening rate, which is associated with the low mobility of dislocations, is the likely cause of low ductility of these alloys. In the near-γ and duplex structures, slip by motion of 1/2<110] unit dislocations and twinning are the prevalent deformation modes at room temperature (RT), whereas twinning is more common in the near- and fully-lamellar structures. The occurrence of twinning is largely dictated by the Schmid factor. The 1/2<110] unit dislocations are prevalent even for grain orientations for which the Schmid factor is higher for <101] superdislocations, though the latter are observed in favorably oriented grains. The activity of both of these systems is responsible for the higher ductility at ambient temperatures compared with Al-rich single-phase γ alloys. A higher twin density is observed in lamellar grains, but their propagation depends on the orientation and geometry of the individual γ lamellae. The increase in ductility at high temperatures correlates with increased activity of 1/2<110] dislocations (including their climb motion) and twin thickening. The role of microstructural variables on strength, ductility, and fracture are discussed. This article is based on a presentation made in the symposium entitled “Fundamentals of Structural Intermetallics,” presented at the 2002 TMS Annual Meeting, February 21–27, 2002, in Seattle, Washington, under the auspices of the ASM and TMS Joint Committee on Mechanical Behavior of Materials.     

An alternative explicit formulation for the DKT plate-bending element

The stiffness matrix for the DKT plate-bending element is formulated explicitly in a global co-ordinate system. This approach avoids transformations of stiffness, and elasticity properties for anisotropic materials, from local to global co-ordinates, which were required in previous formulations. A FORTRAN listing of the algorithm is appended for potential users.