Effects of Prior Annealing on the Spark Plasma Sintering of Nanostructured Y2O3 Powders

The effects produced by annealing Y₂O₃ nanopowders on their spark plasma sintering (SPS) behavior are systematically investigated in this work. It is found that the annealed powders display higher sinterability with respect to the as‐received ones. Indeed, the maximum densification level reached from pristine powders is about 97.5%, whereas density decreases when further increasing either the sintering temperature or the dwell time. In contrast, the density of SPS products obtained from pretreated powder monotonically increases with temperature and processing time, thus leading to fully dense materials in 30 min at 1050°C and 60 MPa. Correspondingly, it is found that the annealing treatment markedly inhibits grain coarsening during SPS. Thus, dense translucent samples with grain size below 100 nm can be attained from annealed powders. On the other hand, white‐opaque specimens with significantly coarser microstructures (up to 1‐μm‐sized grains) are obtained when pristine powders are directly processed under the same sintering conditions. Furthermore, it is observed that the annealing treatment of SPS samples in air allows for graphite contamination removal, whereas no improvement in term of light transmittance is produced.     

Topical laryngo-tracheal anesthesia and intraocular pressure in anesthesia for ophthalmic surgery

OBJECTIVE: The reflex response to orotracheal intubation provokes an increase of arterial pressure accompanied by an increase of chorioides volume and a consequent ocular hypertone. There are several methods to reduce the reflex response due to intubation. One of the most effective is topical anaesthesia of larynx and trachea. Experiments were directed to evaluate the efficacy of topical anaesthesia to reduce the intraocular hypertone due to orotracheal intubation. DESIGN: A prospective randomized mask study was conduct on patients undergoing ophthalmologic (anterior segment) surgery at the Eye Clinic of Florence University. METHODS: Intraocular pressure was measured by a Goldman tonometer at four times: T0 = basal, T1 = 2' minutes after induction of general anaesthesia, T2 = 2' minutes after laryngoscopy, T3 = 2' minutes after orotracheal intubation. At the same moments, systolic blood pressure, heart rate, rate pressure pro duct were measured. Patients were randomly divided in two groups: Group L (n = 10) in which was evaluated the efficacy of laryngotracheal topical spray of lidocaine 4% (2 ml) and Group F (n = 10) in which saline was used instead of anesthetic. The filling of the LTA kit (Abbott) was made by a person not involved in the experiments. DATA ANALYSIS: Student's t test for unpaired data. RESULTS: Topical anaesthesia reduces the increase of intraocular pressure, hypertension and rate pressure product due to intubation. The intraocular pressure reduces to 13% less than basal value in Group L and increase to 50% more than basal value in Group F. CONCLUSION: The topical anaesthesia of larynx and trachea is effective to reduce the intraocular hypertension due to the reflex response evoked by orotracheal intubation.     

Direct monitoring of the calcium concentration in the sarcoplasmic and endoplasmic reticulum of skeletal muscle myotubes

Direct monitoring of the free Ca2+ concentration in the sarcoplasmic reticulum (SR) was carried out in rat skeletal myotubes transfected with a specifically targeted aequorin chimera (srAEQ). Myotubes were also transfected with a chimeric aequorin (erAEQ) that we have demonstrated previously is retained in the endoplasmic reticulum (ER). Immunolocalization analysis showed that although both recombinant proteins are distributed in an endomembrane network identifiable with immature SR, the erAEQ protein was retained also in the perinuclear membrane. The difficulty of measuring [Ca2+] in 100-1000 microM range was overcome with the use of the synthetic coelenterazine analogue, coelenterazine n. We demonstrate that the steady state levels of [Ca2+] measured with srAEQ is around 300 microM, whereas that measured with erAEQ is significantly lower, i.e. around 200 microM. The effects of caffeine, high KCl, and nicotinic receptor stimulation, in the presence or absence of external calcium or after blockade of the Ca-ATPase, were investigated with both chimeras. The kinetics of [Ca2+] changes revealed by the erAEQ were similar, but not identical, neither quantitatively nor qualitatively, to those monitored with the srAEQ, indicating that at this stage of muscle development, differences exist between SR and ER in their mechanisms of Ca2+ handling. The functional implications of these findings are discussed.     

Vibrational analysis of functionalized polyolefins/poly(vinylchloride) blends

Polyolefins functionalized with diethylmaleate were mixed with poly(vinylchloride) (PVC) in different compositions. Intermolecular interactions involving the carbonyl groups of the side chains of the functionalized polyolefins and methine hydrogens of PVC were investigated by means of infrared spectroscopy. The major flexibility of the ester groups attached to the backbone chains, with respect to polyesters, seems to increase the capability of such groups to interact with groups of more polar polymers, thus allowing prediction of easier miscibility, which however also depends on the starting polyolefin structure and function-alization degree.     

Fault-accommodation with intelligent sensors

Optimal sensor fault-accommodation is considered for faults modelled by an increase in measurement noise. This noise is taken to be bounded and its probabilistic properties unknown. It is assumed that intelligent (e.g. self-validating) instrumentation is in use and estimates of the noise bounds are available. The fault-tolerant controller is designed to optimize a noise rejection and a nominal reference tracking index and leads to a mixed norm minimization problem (l₁/l₂). We exploit known results and a particular feedback configuration to show that it is possible to optimize simultaneously without a trade-off the two performance indices. The results are applied to systems where the presence of auxiliary measurements allows for an optimal fault-accommodation strategy. Using properties of the optimal solution, we define a factorization for the optimal controller alternative to the Youla parametrization, leading to an algorithm which is optimal, transparent and efficient.     

Evaluation of a dual-color flow cytometry immunophenotyping panel in a multicenter quality assurance program

A basic immunophenotyping panel that employed dual-color combinations of fluorescein isothiocyanate (FITC) and phycoerythrin (PE) conjugated monoclonal antibodies (mAb; FITC-CD45/PE-CD14, FITC-IgG1/PE-IgG2, FITC-CD3/PE-CD8, FITC-CD3/PE-CD4, FITC-CD3/PE-CD16 + PE-CD56, and PE-CD19) was utilized in a quality assurance program to determine whether the 4 laboratories participating in a multicenter AIDS study obtained similar lymphocyte subset percentage values for T cells, B cells, NK cells, and CD4+ and CD8+ T cells. Over a 1 1/2 year period, 78 shared peripheral blood specimens were prepared and analyzed in each laboratory. The CD45bright CD14- percentage for each specimen was used to correct that individual's lymphocyte subset values. Interlaboratory coefficients of variation (CV) for the human immunodeficiency virus type I (HIV) seronegative (n = 38) and HIV-seropositive (n = 40) specimens using this panel were < 3% for total T cells; < 5% for CD4+ T cells and CD8+ T cells; < or = 17% for B and NK cells; and < 8% for CD4T/CD8T ratios. The 6-tube basic immunophenotyping panel has several notable features: a) for clinical studies, it permits comprehensive evaluation of an individual's major lymphocyte subsets, i.e., T, B, NK, and CD4+ and CD8+ T cells; b) for interlaboratory proficiency testing programs, it allows the detection of differences among laboratories in measurements of several functionally distinct cell populations; and c) for within-sample quality assurance, it provides several quality control checks, including the lymphosum, i.e., the sum of an individual's corrected T+B+NK values, a sum that was generally 100 +/- 5% on the HIV-seronegative specimens analyzed in this study.     

Simultaneous Spark Plasma Synthesis and Densification of TiC–TiB2 Composites

The simultaneous synthesis and densification of dense TiC–TiB₂ composite has been investigated starting from Ti, B₄C, and C as reactants, and using the spark plasma sintering (SPS) technique. The optimal conditions for complete conversion of the reactants to the composite were determined for different applied DC current levels. A kinetic investigation performed allows us to conclude that solid-state diffusion is the mechanism governing the synthesis process. It is seen that TiC is the first phase formed, while TiB₂ formation occurs afterward. Two intermediate boride phases, i.e. TiB and Ti₃B₄, are also formed but, as the SPS holding time was augmented, they were gradually and completely converted to TiB₂. Moreover, it is found that in order to reach relatively high dense products, an electric current needs to be applied for time intervals longer than those required for obtaining complete conversion. A pure dense product (relative density ∼98%) was obtained when an electric pulsed current of 1100 A and a mechanical pressure of 20 MPa were applied for about 4 min.     

Thoracoscopic pleural tent

Lung volume reduction has been performed in patients with advanced emphysema to relieve dyspnea and improve exercise tolerance. Median sternotomy and video-assisted thoracoscopy have been proposed as equally adequate approaches; however, prolonged postoperative air leakage is the most prevalent complication in all series. For this reason, on the basis of the experience achieved with the median sternotomy approach, buttressing of the suture line with different materials and techniques for space reduction have been proposed. We describe a technique to create a pleural tent after thoracoscopic volume reduction. The thoracoscopic creation of a pleural tent is feasible and results in a duration of postoperative air leaks and hospital stays similar to that achieved with stapler line buttressing.     

2-Layer Right Angle Crossing Drawings

A 2-layer drawing represents a bipartite graph where each vertex is a point on one of two parallel lines, no two vertices on the same line are adjacent, and the edges are straight-line segments. In this paper we study 2-layer drawings where any two crossing edges meet at right angle. We characterize the graphs that admit this type of drawing, provide linear-time testing and embedding algorithms, and present a polynomial-time crossing minimization technique. Also, for a given graph G and a constant k, we prove that it is $\mathcal{NP}$ -complete to decide whether G contains a subgraph of at least k edges having a 2-layer drawing with right angle crossings.