Application of Balanced Detection to Absorption Measurements of Trace Gases with Room-Temperature, Quasi-cw Quantum-Cascade Lasers

Distributed-feedback quantum-cascade (QC) lasers are expected to form the heart of the next-generation mid-IR laser absorption spectrometers, especially as they are applied to measurements of trace gases in a variety of environments. The incorporation of room-temperature-operable, single-mode QC lasers should result in highly compact and rugged sensors for real-world applications. We report preliminary results on the performance of a laser absorption spectrometer that uses a QC laser operating at room temperature in a quasi-cw mode in conjunction with balanced ratiometric detection. We have demonstrated sensitivities for N(2)O [10 parts in 10(6) volume-mixing ratio for a 1-m path (ppmv-m)] and NO [520 parts in 10(9) volume-mixing ratio for a 1-m path (ppbv-m)] at 5.4 mum. System improvements are described that are expected to result in a 2 orders of magnitude increase in sensitivity.     

Cavity ringdown spectroscopic detection of nitric oxide with a continuous-wave quantum-cascade laser

A spectroscopic gas sensor for nitric oxide (NO) detection based on a cavity ringdown technique was designed and evaluated. A cw quantum-cascade distributed-feedback laser operating at 5.2 mum was used as a tunable single-frequency light source. Both laser-frequency tuning and abrupt interruptions of the laser radiation were performed through manipulation of the laser current. A single ringdown event sensitivity to absorption of 2.2 x 10(-8) cm(-1) was achieved. Measurements of parts per billion (ppb) NO concentrations in N(2) with a 0.7-ppb standard error for a data collection time of 8 s have been performed. Future improvements are discussed that would allow quantification of NO in human breath.     

Free-space optical transmission of multimedia satellite datastreams using mid-infrared quantum cascade lasers

Experimental results for an optical free-space high-speed link using direct modulated mid-infrared (λ = 8.1 μm) quantum cascade lasers are presented. A total of 800 digitally encoded multimedia channels were transmitted. The reliability of the system against weather influence (fog) was experimentally compared to that of a near-infrared (λ = 0.85 μm) link     

Temperature Dependence of Optical Gain and Loss in $lambda approx$ 8.2–10.2 $mu$m Quantum-Cascade Lasers

Temperature-dependent optical gain and waveguide loss have been measured for continuous-wave operated quantum-cascade lasers with wavelengths between 8.2 and 10.2 mum up to room temperature using the Hakki-Paoli method. The gain coefficient decreases with increasing temperature, and is close to the designed value for vertical transition lasers, but smaller than the designed value for diagonal transition lasers. The waveguide loss, however, is two to three times higher than calculated from free carrier absorption, and can be nearly constant, increase or decrease with temperature depending on sample design, which indicates that it is dominated by another mechanism other than plain free carrier absorption. One likely factor resulting in high waveguide loss is intersubband resonant absorption into higher lying states.     

Thermal Management Enables Bright and Stable Perovskite Light-Emitting Diodes

The performance of lead-halide perovskite light-emitting diodes (LEDs) has increased rapidly in recent years. However, most reports feature devices operated at relatively small current densities (<500 mA cm⁻²) with moderate radiance (<400 W sr⁻¹ m⁻²). Here, Joule heating and inefficient thermal dissipation are shown to be major obstacles toward high radiance and long lifetime. Several thermal management strategies are proposed in this work, such as doping charge-transport layers, optimizing device geometry, and attaching heat spreaders and sinks. Combining these strategies, high-performance perovskite LEDs are demonstrated with maximum radiance of 2555 W sr⁻¹ m⁻², peak external quantum efficiency (EQE) of 17%, considerably reduced EQE roll-off (EQE > 10% to current densities as high as 2000 mA cm⁻²), and tenfold increase in operational lifetime (when driven at 100 mA cm⁻²). Furthermore, with proper thermal management, a maximum current density of 2.5 kA cm⁻² and an EQE of ≈1% at 1 kA cm⁻² are shown using electrical pulses, which represents an important milestone toward electrically driven perovskite lasers.     

Negative refraction in semiconductor metamaterials

An optical metamaterial is a composite in which subwavelength features, rather than the constituent materials, control the macroscopic electromagnetic properties of the material. Recently, properly designed metamaterials have garnered much interest because of their unusual interaction with electromagnetic waves. Whereas nature seems to have limits on the type of materials that exist, newly invented metamaterials are not bound by such constraints. These newly accessible electromagnetic properties make these materials an excellent platform for demonstrating unusual optical phenomena and unique applications such as subwavelength imaging and planar lens design. 'Negative-index materials', as first proposed, required the permittivity, epsilon, and permeability, mu, to be simultaneously less than zero, but such materials face limitations. Here, we demonstrate a comparatively low-loss, three-dimensional, all-semiconductor metamaterial that exhibits negative refraction for all incidence angles in the long-wave infrared region and requires only an anisotropic dielectric function with a single resonance. Using reflection and transmission measurements and a comprehensive model of the material, we demonstrate that our material exhibits negative refraction. This is furthermore confirmed through a straightforward beam optics experiment. This work will influence future metamaterial designs and their incorporation into optical semiconductor devices.     

High-speed digital data transmission using mid-infrared quantumcascade lasers

High-speed mid-infrared quantum cascade lasers with direct modulation bandwidth of approximately 7 GHz have been developed. Error-free digital data transmission at 2.5 Gbit/s is demonstrated with devices emitting at 8 μm and operating at temperatures up to 85 K     

Internally excited acoustic resonator for photoacoustic trace detection

The quantum-cascade laser can be used as an infrared source for a small portable photoacoustic trace gas detector. The device that we describe uses a quantum-cascade laser without collimating optics mounted inside an acoustic resonator. The laser is positioned in the center of a longitudinal resonator at a pressure antinode and emits radiation along the length of the resonator exciting an axially symmetric longitudinal acoustic mode of an open-ended cylindrical resonator. Experiments are reported with an 8-microm, quasi-cw-modulated, room-temperature laser used to detect N2O.