Screening and characterization of microorganisms with glutaryl-7ADCA acylase activity

A screening of microorganisms producing glutaryl-7ADCA acylase, an enzyme able to hydrolyse glutaric acid selectively from glutaryl-3-deacetoxy-7-aminocephalosporanic acid (glutaryl-7ADCA), has been carried out in soil samples. Five microorganisms expressing acylase activity were isolated and classified as Bacillus cereus, Achromobacter xylosooxidans, Bacillus sp., Pseudomonas sp. and Pseudomonas paucimobilis. The screening was carried out by preparing enrichment cultures containing glutaryl-7-ADCA or cephalosporin C as the selective carbon source. Four model compounds (adipoyl-, glutamyl- and glutaryl-p-nitroanilide and glutarylcoumarin), mimicking the glutaryl-7ADCA beta-lactam moiety, were synthesized as substrates suitable for the rapid screening of the microorganisms (2500) isolated from the enrichment cultures. A total of 300 strains were active on the model substrates and only 5 displayed acylase activity on glutaryl-7ADCA. The fermentation parameters, such as pH and inducer concentration, for the optimal acylase expression and acylase specificity towards the model substrates were different for each strain.     

Down modulation of MHC surface molecules on B cells by suppressive immune complexes obtained from chronic intestinal schistosomiasis patients

The effect of repeated maximal isometric knee extensions on electromechanical delay (EMD) and associated muscle temperature changes were investigated on seven college aged subjects. The exercise produced a significant reduction in muscle contraction force, rate of force development and muscle conduction velocity, whilst the muscle temperature increased by 2.1 degrees C. The EMD increased from a pre-exercise value of 38.4 (SEM 3.4) ms to 55.7 (SEM 3.4) ms post-exercise. In an attempt to evaluate the effect of muscle temperature on EMD, hot and ice-water bags were placed on the quadriceps muscle to alter muscle temperature. The EMD in isometric maximal knee extension was measured at 38, 36, 34, 32 and 30 degrees C. The results showed that the EMD elongated at muscle temperatures either lower or higher than 36 degrees C. It was speculated that the increased muscle temperature might contribute to 20-25% of the EMD elongation found during the fatiguing intermittent exercise. The information of the effects of muscle temperature on EMD could be useful when evaluating the effects of strenuous exercise, in which a substantial muscle temperature change might occur, on the time delay between myoelectrical activity and force generation.     

Exoskeleton: Curve network abstraction for 3D shapes

In this paper, we introduce the concept of an exoskeleton as a new abstraction of arbitrary shapes that succinctly conveys both the perceptual and the geometric structure of a 3D model. We extract exoskeletons via a principled framework that combines segmentation and shape approximation. Our method starts from a segmentation of the shape into perceptually relevant parts and then constructs the exoskeleton using a novel extension of the Variational Shape Approximation method. Benefits of the exoskeleton abstraction to graphics applications such as simplification and chartification are presented.     

A theoretical and empirical investigation of multi‐item on‐line auctions

In this paper we explore and analyze the structure of Internet auctions from an analytical and an empirical perspective. Such web‐based auctions are rapidly emerging as a mercantile process of choice in the electronic marketplace. We observe current Internet auctions for one‐time products, such as rapidly aging hardware, and analyze them within the framework of the existing auction theory. While traditional auction theory focuses on single‐item auctions, we observe that a majority of on‐line auctions are multi‐item auctions. A significant contribution of this work is the theoretical derivation of the structure of the winning bids in multi‐item progressive on‐line auctions. Additionally, for comparative purposes, we explore the structural characteristics of alternative multi‐item auction mechanisms proposed in the auction theory. We derive hypotheses based on our analytical results and compare two different types of auction mechanisms. We test the traditional auction theory assumption regarding the homogeneity of bidders and present the first ever empirically derived classification and performance‐comparison of on‐line bidders. We test our hypotheses using real‐world empirical data obtained by tracking a premier web‐based auction site. Statistical analysis of the data indicates that firms may gain by choosing alternative auction mechanisms. We also provide directions for further exploration of this emerging but important dimension of electronic commerce. This revised version was published online in July 2006 with corrections to the Cover Date.     

Tubular dentin sealer penetration after different final irrigation protocols: A confocal laser scanning microscopy study

The aim of this study was to evaluate tubular dentin sealer penetration, comparing different final irrigation protocols using a conventional needle (CONV), EndoActivator system (EAS), EndoVac system (EVS), and ultrasound (PUI). Initially, fifty‐two first maxillary molars with a single canal in the palatal root, without abrupt curvatures, resorptive processes, or previous endodontic treatment were selected for this study. Then, the crowns were sectioned to obtain palatal roots 15 mm in length. The root canals were prepared with the ProTaper Universal System and irrigated with 5% NaOCl. Afterwards, the specimens were divided into four groups (n. 13), according to the final irrigation protocol: CONV, EAS, EVS, and PUI. After filling, slices at 3 mm and 5 mm from the apex were obtained for analysis by confocal laser scanning microscopy. Two‐way comparisons between the groups and the levels were performed with Games Howell's test (p < .05). Tubular dentin sealer penetration was higher at 5 mm compared with 3 mm from the apex (p < .05). The EAS group showed a higher percentage of tubular dentin sealer penetration, compared with the CONV group, at both levels. At 3 mm, there was no statistically significant difference among EAS, EVS, and PUI; however, these groups showed better performance, compared with the CONV group. At 5 mm, there was no statistically significant difference between the EAS and EVS groups, but both showed higher sealer penetration than the PUI group (p < .05). The EAS and EVS groups achieved better degrees of tubular dentin sealer penetration, compared with the other groups.     

Correlation between light intensity and exposure time on the hardness of composite resin

This study evaluated the correlation between light intensity emitted by the curing units and exposure time on the of degree polymerization of dental composites by measured Knoop hardness. Specimens with 5 mm diameter and 2 mm height were prepared in a copper mold, covered with a mylar strip and polymerized for 30 sec by curing units with 50, 130, 180, 220, 280 and 520 mW/cm², respectively. The output for all units was measured using a Curing Radiometer (Demetron). Other specimens were polymerized for 45, 60, 75, 90, 105, 120, 135, 150, 165 and 180 sec utilizing units of 130, 220 and 280 mW/cm². Knoop hardness values of the top and bottom surfaces were measured after 24 h. The results indicate that the curing units with higher light intensity presented improved values of Knoop hardness on the top and bottom regions. As expected, the top surface always presented improved Knoop hardness values in relation to the bottom, after exposure for 30 sec. The values obtained on the surface were statistically superior compared to the values on the bottom (p<0.05) for the intensity of 130, 220 and 280 mW/cm² after 30, 45 and 60 sec of exposure. ©2000 Kluwer Academic Publishers     

Characterization of Schistosoma mansoni specific human T-T hybrids

V-Effects of thrombolytic therapy on coronary reperfusion and left ventricular function VI-Noninvasive markers of reperfusion. VII-Timing of thrombolysis. VIII-Side effects and adverse outcomes.     

A multi-purpose Schrödinger-Poisson Solver for TCAD applications

We present the Vienna Schrödinger-Poisson Solver (VSP), a multi-purpose quantum mechanical solver for investigations on nano-scaled device structures. VSP includes a quantum mechanical solver for closed as well as open boundary problems on fairly arbitrary one-dimensional cross sections within the effective mass framework. For investigations on novel gate dielectrics VSP holds models for bulk and interface trap charges, and direct and trap assisted tunneling. Hetero-structured semiconductor devices, like resonant tunneling diodes (RTD), can be treated within the closed boundary model for quick estimation of resonant energy levels. The open boundary model allows evaluation of current voltage characteristics.     

A 21-mW 8-b 125-MSample/s ADC in 0.09-mm/sup 2/ 0.13-/spl mu/m CMOS

This paper presents an 8-b two-step subranging analog-to-digital (ADC) using interpolation, averaging, offset compensation, and pipelining techniques to accomplish an effective number of bits of 7.6 b at 125 MSample/s. The 0.13-/spl mu/m CMOS ADC occupies 0.09 mm/sup 2/ and consumes 21 mW.     

Disturbed MHC regulation in the IFN-gamma knockout mouse. Evidence for three states of MHC expression with distinct roles for IFN-gamma

We compared the expression of MHC class I and II products in tissues of IFN-gamma knockout (GKO) vs normal (wild-type) BALB/c mice. We studied expression in the basal state, after local tissue injury, after stimuli that induce systemic MHC expression (allogeneic cells, oxazolone skin painting, or LPS), and after rIFN-gamma. Basal class II expression in interstitial cells was not reduced in GKO mice. However, GKO mice had less basal class I expression in kidney, liver, heart, and arterial endothelium than wild-type mice. Local renal ischemic injury increased class I and II expression in kidney tubules of both GKO and wild-type mice, but induction in GKO was less than in wild-type. Potent inflammatory stimuli increased systemic MHC class I and II markedly in kidney, liver, and heart of wild-type mice, but induced no increase in GKO mice. rIFN-gamma induced class I and II equally in GKO and wild-type mice. Thus, three states of MHC expression can be defined that differ in their dependencies on IFN-gamma: basal, locally induced, and systemically induced. Basal class II expression in interstitial cells is IFN-gamma independent, but basal class I expression, particularly in arterial endothelium, is partially dependent on IFN-gamma. The local increase in MHC class I and II in parenchymal cells in response to injury reflects both IFN-gamma and a non-IFN-gamma factor. Systemic MHC class I and II induction is almost exclusively due to IFN-gamma.