Towards an optimised lab procedure for long-term oxidative ageing of asphalt mix specimen

Ageing of bitumen leads to increased stiffness and brittleness. Thus, bituminous bound pavements become more prone to failure by low-temperature and fatigue cracking. Therefore, the ageing behaviour of bitumen has a crucial impact on durability, as well as recyclability of pavements. To assess ageing of bitumen, the rolling thin film oven test and pressure ageing vessel are standardised methods for short-term and long-term ageing in the lab. For lab-ageing of hot mix asphalt (HMA), various methods have been developed in the last decades. This paper presents a study on the potential of employing a highly oxidant gas for simulating the long-term oxidative ageing of asphalt mix specimens in the lab. Based on the results, an optimised lab-ageing procedure (Viennese Ageing Procedure – VAPro) for compacted HMA specimens to assess mix performance of long-term lab-aged specimens is developed. Thus, it is possible to optimise mix design not only for short-term performance but to take into account effects of oxidative ageing during its in-service life. VAPro is based on a triaxial cell with forced flow of a gaseous oxidant agent through the specimen. The oxidant agent is enriched in ozone and nitric oxides to increase the rate of oxidation. It is shown by stiffness tests of unaged and lab-aged specimens, as well as by Dynamic Shear Rheometer tests of recovered binder from aged specimens that asphalt mixes can be long-term aged at moderate temperatures (+60°C) and within 4 days and a flow rate of 1 l/min by applying VAPro. Thus, an ageing procedure is at hand that can simulate long-term ageing at conditions that are representative of conditions that occur in the field within an efficient amount of time.     

High-Resolution Infrared Fourier-Transform Spectroscopy and Rotational Constants of the nu4 Band of BrNO2

In this study, we assessed the influence of three analgesic techniques on postoperative knee rehabilitation after total knee arthroplasty (TKA). Forty-five patients scheduled for elective TKA under general anesthesia were randomly divided into three groups. Postoperative analgesia was provided with i.v. patient-controlled analgesia (PCA) with morphine in Group A, continuous 3-in-1 block in Group B, and epidural analgesia in Group C. Immediately after surgery, the three groups started identical physical therapy regimens. Pain scores, supplemental analgesia, side effects, degree of maximal knee flexion, day of first walk, and duration of hospital stay were recorded. Patients in Groups B and C reported significantly lower pain scores than those in Group A. Supplemental analgesia was comparable in the three groups. Compared with Groups A and C, a significantly lower incidence of side effects was noted in Group B. Significantly better knee flexion (until 6 wk after surgery), faster ambulation, and shorter hospital stay were noted in Groups B and C. However, these benefits did not affect outcome at 3 mo. We conclude that, after TKA, continuous 3-in-1 block and epidural analgesia provide better pain relief and faster knee rehabilitation than i.v. PCA with morphine. Because it induces fewer side effects, continuous 3-in-1 block should be considered the technique of choice. Implications: In this study, we determined that, after total knee arthroplasty, loco-regional analgesic techniques (epidural analgesia or continuous 3-in-1 block) provide better pain relief and faster postoperative knee rehabilitation than i.v. patient-controlled analgesia with morphine. Because it causes fewer side effects than epidural analgesia, continuous 3-in-1 block is the technique of choice.     

Efficiency of Light Outcoupling Structures in Organic Light‐Emitting Diodes: 2D TiO2 Array as a Model System

Organic light‐emitting diodes (OLEDs) are widely used in research and are established in the industry. The building block nature of organic compounds enables a vast variety of materials. On top of that, there exist many strategies to improve the light outcoupling of OLEDs making a direct comparison of outcoupling technologies difficult. Here, a novel approach is introduced for the evaluation of light outcoupling structures. The new defined “efficiency of light outcoupling structures” (ELOS) clearly determines the effectiveness of the light outcoupling structure by weighting the experimental efficiency enhancement over the theoretical outcoupling gain. It neither depends on cavity design nor on the chosen organic material. The methodology is illustrated for red phosphorescent OLEDs comprising internal and external light outcoupling structures. Assumptions and further uses are discussed with respect to experimental and theoretical handling. In addition, the ELOS is calculated for various outcoupling techniques from literature to demonstrate the universality. Finally, most suitable reference OLEDs are discussed for application of light outcoupling structures. The presented approach enables new possibilities for studying light outcoupling structures and improves their comparability in a highly material‐driven research field.     

Switchable Supercapacitors with Transistor‐Like Gating Characteristics (G‐Cap)

A novel three‐electrode electrolyte supercapacitor (electric double‐layer capacitor [EDLC]) architecture in which a symmetrical interdigital “working” two‐electrode micro‐supercapacitor array (W‐Cap) is paired with a third “gate” electrode that reversibly depletes/injects electrolyte ions into the system controlling the “working” capacity effectively is described. All three electrodes are based on precursor‐derived nanoporous carbons with well‐defined specific surface area (735 m² g^?1). The interdigitated architecture of the W‐Cap is precisely manufactured using 3D printing. The W‐Cap operating with a proton conducting PVA/H₂SO₄‐hydrogel electrolyte and high capacitance (6.9 mF cm^?2) can be repeatedly switched “on” and “off”. By applying a low DC bias potential (?0.5 V) at the gate electrode, the AC electroadsorption in the coupled interdigital nanoporous carbon electrodes of the W‐Cap is effectively suppressed leading to a stark capacity drop by two orders of magnitude from an “on” to an “off” state. The switchable micro‐supercapacitor is the first of its kind. This general concept is suitable for implementing a broad range of nanoporous materials and advanced electrolytes expanding its functions and applications in future. The integration of intelligent functions into EDLC devices has extensive implications for diverse areas such as capacitive energy management, microelectronics, iontronics, and neuromodulation.     

Collection of soot particles into aqueous suspension using a particle-into-liquid sampler

Steam collection devices collecting aerosol particles into liquid samples are frequently used to analyze water-soluble particulate material. The fate of water-insoluble components is often neglected. In this work, we show that fresh soot particles can be suspended into pure water using a steam collection device, the particle-into-liquid sampler (PILS, Weber et?al. 2001). The overall collection efficiency of freshly generated soot particles was found to be on the order of 20%. This shows that, depending on the analytic technique employed, the presence of insoluble, and/or hydrophobic particles in liquid samples from steam collection cannot be neglected.

Copyright © 2018 The Author(s). Published with license by Taylor & Francis Group, LLC     

Spatial dependence in wind and optimal wind power allocation: A copula-based analysis

The investment decision on the placement of wind turbines is, neglecting legal formalities, mainly driven by the aim to maximize the expected annual energy production of single turbines. The result is a concentration of wind farms at locations with high average wind speed. While this strategy may be optimal for single investors maximizing their own return on investment, the resulting overall allocation of wind turbines may be unfavorable for energy suppliers and the economy because of large fluctuations in the overall wind power output. This paper investigates to what extent optimal allocation of wind farms in Germany can reduce these fluctuations. We analyze stochastic dependencies of wind speed for a large data set of German on- and offshore weather stations and find that these dependencies turn out to be highly nonlinear but constant over time. Using copula theory we determine the value at risk of energy production for given allocation sets of wind farms and derive optimal allocation plans. We find that the optimized allocation of wind farms may substantially stabilize the overall wind energy supply on daily as well as hourly frequency.     

Acrylamide formation and antioxidant level in biscuits related to recipe and baking

Heated plant foods may contain compounds with adverse health effects (e.g. acrylamide). On the other hand, health-promoting compounds (e.g. antioxidants) have also been identified in such foods. Therefore, a baking experiment with biscuits was carried out to study the potential impact of both acrylamide and antioxidants in that food. Two different wheat flour types - wholemeal (WMF) and white flour type 550 (T550; 0.55% mineral content) - as well as recipe (fat and leavening agent) and thermal input (temperature?×?time) were changed. Furthermore, the effect of an enzymatic asparagine hydrolysation was tested. Antioxidants were determined with two independent procedures ABTS - (2,2'-azinobis-(3-ethylbenzothiazoline-6-sulfonate)) and FRAP-assay (ferric reducing ability of plasma). WMF samples resulted in an unchanged acrylamide level, but in a significantly higher antioxidant concentration when compared with T550 samples (149 and 141?μg?kg(-1) acrylamide and 9.1 and 5.1?mmol?TE?kg(-1) FW ABTS for WMF and T550, respectively). A reduced fat content yielded in an increased volume. Raising agents had no effect on acrylamide levels, but antioxidants were higher in samples with sodium bicarbonate (SBC) than with ammonium bicarbonate (ABC). Thermal input (temperature?×?time; 150°C?×?25?min to 240°C?×?9?min) indicated an exponential acrylamide increase especially at higher temperatures (from 75 to 236?μg?kg(-1)), whereas antioxidant increase was linear (from 7.0 to 7.7?mmol?TE?kg(-1) FW, ABTS). FRAP and ABTS values were correlated on a low level, whereas acrylamide content of biscuits was correlated with FRAP and lightness (R (2?)=?0.62 and 0.47, and 0.71 and 0.85 for WMF and T550, respectively). The enzyme asparaginase reduced acrylamide formation by about 50% for both raising agents (SBC and ABC, respectively), whereas antioxidant levels were not affected. An evaluation of recipe variants with low acrylamide and high antioxidants indicated the advantage of wholemeal biscuits.