Properties of poly(ethylene terephthalate)–poly(ethylene naphthalene 2,6‐dicarboxylate) blends with montmorillonite clay

The production and properties of blends of poly(ethylene terephthalate) (PET) and poly(ethylene naphthalene 2,6‐dicarboxylate) (PEN) with three modified clays are reported. Octadecylammonium chloride and maleic anhydride (MAH) are used to modify the surface of the montmorillonite–Na⁺ clay particles (clay–Na⁺) to produce clay–C18 and clay–MAH, respectively, before they are mixed with the PET/PEN system. The transesterification degree, hydrophobicity and the effect of the clays on the mechanical, rheological and thermal properties are analysed. The PET–PEN/clay–C18 system does not show any improvements in the mechanical properties, which is attributed to poor exfoliation. On the other hand, in the PET–PEN/clay–MAH blends, the modified clay restricts crystallization of the matrix, as evidenced in the low value of the crystallization enthalpy. The process‐induced PET–PEN transesterification reaction is affected by the clay particles. Clay–C18 induces the largest proportion of naphthalate–ethylene–terephthalate (NET) blocks, as opposed to clay–Na⁺ which renders the lowest proportion. The clay readily incorporates in the bulk polymer, but receding contact‐angle measurements reveal a small influence of the particles on the surface properties of the sample. The clay–Na⁺ blend shows a predominant solid‐like behaviour, as evidenced by the magnitude of the storage modulus in the low‐frequency range, which reflects a high entanglement density and a substantial degree of polymer–particle interactions. Copyright © 2005 Society of Chemical Industry     

Atmospheric corrosion of reference metals in Antarctic sites

This paper presents the results obtained at three Antarctic test sites participating in the “Ibero-American Map of Atmospheric Corrosiveness” (MICAT), a project on atmospheric corrosion carried out during the period 1988–1994 at some 70 sites distributed across 12 countries of the Latin-American region, Spain and Portugal. The three Antarctic sites are located near the coastline.The singular climatic characteristics of Antarctic regions are related with the purity of the air, the absence of rainfall and the formation of ice on the metallic surface during an important part of the exposure time. However, electrochemical activity is possible below ice layers. This situation affects the structure and morphology of corrosion product films and the resulting corrosion rates of metallic surfaces.     

Single stage and double absorption heat transformers used to recover energy in a distillation column of butane and pentane

This paper presents the theoretical analysis of the use of single stage and double absorption heat transformers operating with the water–lithium bromide mixture coupled to a butane and pentane distillation column in a Mexican refinery. A mathematical model of the heat transformers was developed in FORTRAN and integrated as a user model to the Aspen Plus simulation code. Both components coupled to the column were modelled on steady-state conditions. The results show that it is theoretically possible to reduce the energy consumed in the reboiler between 26 and 43% by the use of single stage heat transformer at specific conditions, and between 28 and 33% with double absorption heat transformers for a wide range of operating conditions. Copyright © 2003 John Wiley & Sons, Ltd.     

Epidemiology of peptic ulcer disease in cirrhotic patients: role of Helicobacter pylori infection

OBJECTIVE: The aim of this study was to investigate the clinical and epidemiological factors associated with the appearance of peptic ulcer in patients with cirrhosis and, in particular, the role of Helicobacter pylori infection. METHODS: A total of 201 of 220 consecutive patients included in a prospective study that aimed to evaluate the effect of dietary intervention on cirrhotic complications and survival underwent upper gastrointestinal endoscopy. At entry, an epidemiological and clinical questionnaire was completed and the presence of peptic ulcer disease or esophageal varices at endoscopy was prospectively collected. Sera were obtained and stored at -70 degrees C until analyzed, being tested afterward for Helicobacter pylori antibodies using a commercial ELISA kit. RESULTS: Eleven of 201 patients had borderline anti-Helicobacter pylori IgG titers and were excluded from further analysis. In the remaining 190 patients, point prevalence of peptic ulcer was 10.5% and lifetime prevalence 24.7%. Multivariate analysis selected male sex (OR 2.3; 95%CI 1.09-4.89) and Helicobacter pylori seropositivity (OR: 1.7, 95%CI 1.02-2.81) as the variables independently related to peptic ulcer disease. CONCLUSIONS: Male sex and seropositivity for Helicobacter pylori are the major risk factors for peptic ulcer in cirrhosis.     

Inhibitors of Chemoresistance Pathways in Combination with Ara-C to Overcome Multidrug Resistance in AML. A Mini Review

Acute myeloid leukemia (AML), the most common type of leukemia in older adults, is a heterogeneous disease that originates from the clonal expansion of undifferentiated hematopoietic progenitor cells. These cells present a remarkable variety of genes and proteins with altered expression and function. Despite significant advances in understanding the molecular panorama of AML and the development of therapies that target mutations, survival has not improved significantly, and the therapy standard is still based on highly toxic chemotherapy, which includes cytarabine (Ara-C) and allogeneic hematopoietic cell transplantation. Approximately 60% of AML patients respond favorably to these treatments and go into complete remission; however, most eventually relapse, develop refractory disease or chemoresistance, and do not survive for more than five years. Therefore, drug resistance that initially occurs in leukemic cells (primary resistance) or that develops during or after treatment (acquired resistance) has become the main obstacle to AML treatment. In this work, the main molecules responsible for generating chemoresistance to Ara-C in AML are discussed, as well as some of the newer strategies to overcome it, such as the inclusion of molecules that can induce synergistic cytotoxicity with Ara-C (MNKI-8e, emodin, metformin and niclosamide), subtoxic concentrations of chemotherapy (PD0332991), and potently antineoplastic treatments that do not damage nonmalignant cells (heteronemin or hydroxyurea + azidothymidine).     

Evaluation of Surface Residual Stresses in Friction Stir Welds Due to Laser and Shot Peening

The effects of laser, and shot peening on the residual stresses in friction stir welds (FSW) has been investigated. The surface residual stresses were measured at five different locations across the weld in order to produce an adequate residual stress profile. The residual stresses before and after sectioning the coupon from the welded plate were also measured, and the effect of coupon size on the residual stress relaxation was determined and characterized. Measurements indicate that residual stresses were not uniform along the welded plate, and large variation in stress magnitude could be exhibited at various locations along the FSW plate. Sectioning resulted in significant residual stress relaxation in the longitudinal direction attributed to the large change in dimensions in this direction. Overall, laser and shot peening resulted in a significant reduction in tensile residual stresses at the surface of the specimens.     

CALIBRATION OF THE METHOD TO MEASURE BUBBLE PROPERTIES IN 2D FLUIDIZED BEDS

The purpose of the present work is to demonstrate the reliability of a digital image processing technique. A CCD (Charge Coupled Device) is used to perform an investigation on the bubble properties of a 2D gas-solid fluidized bed, and the aim of this study is to establish a criterion in order to reject all images that could not be interpreted as bubbles. This may lead to an alteration of the information obtained. The two-dimensional fluidized bed is 20 cm wide and at least 20 cm high, and the field of view of the camera is 12.54 cm wide and 12.99 cm high. In this way, bubbles could be totally or partially placed into this field of view so that a partial image of a bubble could be analyzed as a whole bubble. With this calibration, a geometric decision criterion for the rejection of nonbubble images was developed.