High-performance MIM capacitor using ALD high-k HfO/sub 2/-Al/sub 2/O/sub 3/ laminate dielectrics

For the first time, we successfully fabricated and demonstrated high performance metal-insulator-metal (MIM) capacitors with HfO/sub 2/-Al/sub 2/O/sub 3/ laminate dielectric using atomic layer deposition (ALD) technique. Our data indicates that the laminate MIM capacitor can provide high capacitance density of 12.8 fF//spl mu/m/sup 2/ from 10 kHz up to 20 GHz, very low leakage current of 3.2 /spl times/ 10/sup -8/ A/cm/sup 2/ at 3.3 V, small linear voltage coefficient of capacitance of 240 ppm/V together with quadratic one of 1830 ppm/V/sup 2/, temperature coefficient of capacitance of 182 ppm//spl deg/C, and high breakdown field of /spl sim/6 MV/cm as well as promising reliability. As a result, the HfO/sub 2/-Al/sub 2/O/sub 3/ laminate is a very promising candidate for next generation MIM capacitor for radio frequency and mixed signal integrated circuit applications.     

Magnet Safety Assessment for ITER

The ITER magnet system consists of structurally linked sets of toroidal (TF) and poloidal (PF) field coils, central solenoid (CS), and various support structures. The coils are superconducting, force flow Helium cooled with a Kapton-Glass-Epoxy multilayer insulation system. The stored magnetic energy is about 100GJ in the TF system and 20GJ in the PF-CS. Coils and structure are maintained at 4 K by enclosing them in a vacuum cryostat. The cryostat, comprising an outer envelope to the magnets, forms most of the second radioactivity confinement barrier. The inner primary barrier is formed by the vacuum vessel, its ports and their extensions. To keep the machine size within acceptable bounds, it is essential that the magnets are in close proximity to both of the nuclear confinement barriers. The objective of the magnet design is that, although local damage to one of the barriers may occur in very exceptional circumstances, large scale magnet structural or thermal failure leading to simultaneous breaching of both barriers is not credible. Magnet accidents fall into three categories: thermal (which includes arcing arising from insulation failure and local overheating due to discharge failure in the event of a superconductor quench), structural (which includes component mechanical failure arising from material inadequacies, design errors and exceptional force patterns arising from coil shorts or control failures), and fluid (Helium release due to cooling line failure). After a preliminary survey to select initial faults conceivable within the present design, these faults are systematically analyzed to provide an assessment of the damage potential. The results of this damage assessment together with an assessment of the reliability of the monitoring and protective systems, shows that the magnets can operate with the required safety condition.     

Recombination-induced variants of Clostridium acetobutylicum ATCC 824 with increased solvent production

Three sporulation-specific genes (orfA, sigE, sigG) from clostridium acetobutylicum ATCC 824 are arranged in a cluster, encoding the putative sigma E-processing enzyme, sigma E, and sigma sigma G respectively. When they were transformed into Clostridium acetobutylicum while on a plasmid functional in this organism, transformants did not survive. Three kinds of recombinations were then attempted with nonreplicative plasmids: duplication of orfA and sigE, replacement of all of the three genes, and inactivation of orfA. While the wild-type strain ceased to grow and produce solvents in batch cultures after approximately 24 h, mutant strains were isolated that showed sustained growth for a much longer time and produced a threefold increase in acetone and butanol in test tube cultures. In addition, one of the derived strains showed a significantly higher growth rate. Features of the restriction maps of the recombinants did not correlate with expected maps, indicating possible complications occurring during the recombination events.     

The effect of the length of a malarial epitope on its antigenicity and immunogenicity in an epitope presentation system using the Pseudomonas aeruginosa outer membrane protein OprF as the carrier

The phenotypic characteristics of three Serpulina pilosicoli strains isolated from humans with diarrhoea (WesB, Kar, Hrm7) and two porcine S. pilosicoli strains isolated from pigs with intestinal spirochaetosis (1648, 3295), were compared with the type strain of the species P43/6/78T (T = type strain) and other intestinal spirochaetes within the genus Serpulina. All S. pilosicoli strains had a characteristic ultrastructural appearance, displayed similar growth rates, hydrolysed hippurate, lacked beta-glucosidase activity, utilised D-ribose as a growth substrate, and had similar sensitivities to rifampicin and spiramycin. The only consistent phenotypic characteristic that differentiated human strains from porcine strains of S. pilosicoli was that the human strains all utilised the pentose sugar D-xylose. These distinguishing phenotypic traits appear useful for identifying S. pilosicoli.     

Integrated carbon nanotube field emission differential amplifier: Modeling and measurement of the common-mode rejection ratio

A novel integrated vacuum field emission (VFE) differential amplifier (diff-amp) utilizing carbon nanotube (CNT) emitters has been developed. A dual-mask microfabrication process was employed to achieve a VFE diff-amp by integrating identical CNT VFE transistors with built-in split gates and integrated anodes. The identical pair of triode amplifiers was well-matched in their device characteristics. The measured ac small-signal characteristics of the diff-amp showed a common-mode-rejection ratio (CMRR) of ~ 320 (~ 50 dB). The proposed analytical model of the CMRR was verified to be in good agreement with the experimental data. The successful implementation of the CNT diff-amp demonstrates a new way to achieve temperature and radiation tolerant VFE integrated microelectronics.     

Development of Stretch Solder Interconnections for Wafer Level Packaging

A wafer level packaging technique has been developed with an inherent advantage of good solder joint co-planarity suitable for wafer level testing. A suitable weak metallization scheme has also been established for the detachment process. During the fabrication process, the compliancy of the solder joint is enhanced through stretching to achieve a small shape factor. Thermal cycling reliability of these hourglass-shaped, stretch solder interconnections has been found to be considerably better than that of the conventional spherical-shaped solder bumps.     

Analysis and synthesis of on-chip spiral inductors

This paper presents a physically based compact model for estimating high-frequency performance of spiral inductors. The model accurately accounts for skin and proximity effects in the metal conductors as well as eddy current losses in the substrate. The model shows excellent agreement with measured data mostly within 10% across a variety of inductor geometries and substrate dopings up to 20 GHz. A web-based spiral inductor synthesis and analysis tool COILS, which makes use of the compact models, is presented. An optimization algorithm using binary searches speeds up the synthesis of inductor designs.     

The prediction of solute transport in surcharged manholes using CFD.

Solute transport processes occur within a wide range of water engineering structures, and urban drainage engineers increasingly rely on modelling tools to represent the transport of dissolved materials. The models take as input representative travel time and dispersion characteristics for key system components, and these generally have to be identified via field or laboratory measurements. Computational Fluid Dynamics (CFD) has the potential to reveal the underlying hydraulic processes that control solute transport, and to provide a generic means of identifying relevant parameter values. This paper reports on a study that has been undertaken to evaluate the feasibility of utilising a CFD-based approach to modelling solute transport. Discrete phase modelling has been adopted, as this is computationally efficient and robust when compared with the time-dependent solution of the advection-dispersion equation. Simulation results are compared with published laboratory data characterising the dispersion effects of surcharged manholes, focusing specifically on an 800 mm diameter laboratory manhole for a flowrate of 0.002 m(3)/s and a range of surcharge depths. Preliminary indications are that the CFD results adequately replicate the measured downstream temporal concentration profiles, and that a threshold surcharge depth, corresponding to a change in hydraulic regime within the manhole, can also be identified.