Lessons learned from the DIASTAT vascular access graft

In male Syrian hamsters, short days induce regression of the reproductive system, but eventually spontaneous recrudescence occurs ensuing from refractoriness to the inhibitory photoperiod. Although the photoperiod of 12 L:12 D (12 h light:12 h dark) may act like a short day by inducing the testicular cycle outlined above, it may fail to evoke the increase of circulating concentrations of prolactin that accompanies testicular recrudescence. This photoperiod may fail to induce photorefractoriness, as indicated by the prolonged low concentrations of prolactin in the blood. Herein, hamsters were exposed to either 8 L:16 D or 12 L:12 D from weaning and by 28 weeks exposure to either photoperiod, the hamsters had large testes following recrudescence from a photoperiod induced-regression). Transfer to 8 L:16 D from 12 L:12 D at 28 weeks resulted in a second testicular regression and recrudescence. In a second experiment, the testes of hamsters moved to 8 L:16 D from 12 L:12 D after 29 weeks exposure to the latter photoperiod similarly regressed and then regrew. Serum concentrations of prolactin decreased in these males after transfer to the shorter daylength but also decreased in hamsters kept under 12 L:12 D both groups were usually below those of hamsters moved to 14 L:10 D. These results show that exposure for 28 or 29 weeks to 12 L:12 D was insufficient to induce photorefractoriness, despite the recrudescence of the testes following involution.     

RP-HPLC binding domains of proteins

Procedures have been developed to identify the chromatographic binding domains of horse heart cytochrome c (Cyt c) and bovine growth hormone (bGH) during their interaction with reversed-phase sorbent materials. The procedure involves adsorption of the protein solute to the chromatographic sorbent, followed by proteolytic cleavage. Comparison of the proteolytic map obtained for Cyt c and bGH in free solution with the corresponding map obtained when these proteins are adsorbed to the chromatographic sorbent revealed significant differences in the digestion pattern. Following characterization of the peptides generated in both maps, the results indicated that specific regions on the surface of both Cyt c and bGH are inaccessible to tryptic cleavage when adsorbed to the hydrophobic surface of both a C-4 and a C-18 sorbent. Based on the assumption that the region of the protein surface that is in contact with the sorbent remains intact and bound to the sorbent during the digestion step, while the protein surface that is exposed to the solvent is accessible to proteolysis, the regions that were inaccessible to tryptic digestion were found to correspond to hydrophobic domains on the protein surface. These results also suggest that the three-dimensional structures of these proteins remain largely intact upon adsorption to the hydrophobic surface.     

Stiffness of trabecular bone of the tibial plateau in patients with rheumatoid arthritis of the knee

Stiffness of subchondral proximal tibial trabecular bone is a factor in the stability of prostheses implanted into that bone. The stiffness of trabecular bone in osteoarthritis (OA) has been documented. Trabecular bone in rheumatoid arthritis (RA) is osteopenic in numerous sites and morphologically abnormal in the proximal tibia. Reliable data on proximal tibial bone in RA are lacking, although 1 study failed to identify abnormalities. The purposes of this study were (1) to document the stiffness of the proximal tibial cancellous bone in patients with RA, (2) to determine the effect of angular deformity on bone stiffness in rheumatoid patients, and (3) to compare RA stiffness values with those in published reports for OA. Fifteen tibial plateau were obtained from patients with RA during surgery. Each plateau was horizontally seated in a mold and covered with cement. The plateau was divided into 6 regions, which were used to facilitate comparison between specimens and the existing literature. Indentation tests were conducted with a 4-mm-diameter cylindrical indentor controlled by an MTS machine. The indentor descended at a rate of 2 mm/min to a maximum depth of 1.0 mm; load and displacement data were digitally recorded. Stiffness was calculated from the slope of the linear region of the curve using best-fit linear regression. Where varus deformity was present, stiffness in the medial plateau was higher overall than for the other compartment; whereas in the case of valgus deformity, stiffness of the lateral side was significantly higher (P < .05 for each observation). In comparison to older normal specimens, both the medial compartment of the varus RA specimens (P < .01) and the posterolateral compartment of the valgus RA specimens (P < .01) had significantly lower stiffness. Comparison with OA specimens showed that in varus RA, the posteromedial region had significantly lower stiffness than in varus OA at the same site (P < .01). In valgus RA, the lateral region had significantly lower stiffness than in valgus OA at the same site (P < .01). The mean stiffness ratio of the valgus RA was significantly (P < .01) altered from normal, and for the varus RA, it was significantly (P < .01) different from normal posteriorly. The stiffness ratios for the varus RA were significantly (P < .01) different from those for varus OA; there was no difference between valgus RA and valgus OA. It is concluded that RA affected bone has significantly lower stiffness than normal and osteoarthritic bone. The loaded plateau is stiffer than the unloaded plateau in angular deformity, but is still less stiff than normal bone and osteoarthritic plateaus with corresponding deformities.     

A chemical ionization mass spectrometry method for the online analysis of organic aerosols

A new technique employing chemical ionization mass spectrometry (CIMS) is described that allows the composition of organic particles to be determined on the time scale of seconds. With this Aerosol CIMS technique, particles are vaporized thermally at temperatures up to 480 degrees C, and the resulting vapor is chemically ionized and detected with a quadrupole mass spectrometer. The separation of the vaporization and ionization steps allows greater control and more flexibility for the detection of condensed phases than with other chemical ionization methods. Consequently, composition can be correlated to volatility, providing an additional dimension of information. The use of a variety of positive and negative reagent ions, such as H(+)(H(2)O)(2), H(+)(CH(3)OH)(2), NO(+), O(2)(+), O(2)(-), F(-), and SF(6)(-), offers flexibility in the detection sensitivity and specificity. Furthermore, the degree of fragmentation of the resulting ion can be controlled, providing more straightforward identification and quantification than with other commonly used methods, such as electron impact ionization. Examples are given of the detection of aerosols consisting of organics with various functionalities, including alkanes, alkenes, alcohols, aldehydes, ketones, and carboxylic acids. Applications of this technique to laboratory studies of atmospherically relevant aerosol reactions are discussed.     

Design of an Optical Photon Counting Array Receiver System for Deep-Space Communications

Demand for increased capacity in deep-space to Earth communications systems continues to rise as sensor data rates climb and mission requirements expand. Optical free-space laser communications systems offer the potential for operating at data rates 10 to 1000 times that of current radio-frequency systems. A key element in an optical communications system is the Earth receiver. This paper reviews the design of a distributed photon-counting receiver array composed of four meter-class telescopes, developed as a part of the mars laser communications demonstration (MLCD) project. This design offers a cost-effective and adaptable alternative approach to traditional large, single-aperture receive elements while preserving the expected improvement in data rates enabled by free-space laser communications systems. Key challenges in developing distributed receivers and details of the MLCD design are discussed.     

Recommendations for toxicological investigations of drug-facilitated sexual assaults

The recent increase in reports of drug-facilitated sexual assaults has caused alarm in the general public and prompted forensic toxicologists from across North America to address the toxicological issues surrounding this matter. The authors have developed recommendations and guidelines to inform law enforcement, medical, and scientific personnel of the requirements for performing successful toxicological examinations in cases of drug-facilitated rape.     

The role of calcium in blended fly ash geopolymers

In this research effort, the role of calcium in geopolymers was investigated through a series of syntheses where a high-calcium fly ash was blended with a low-calcium fly ash. Increased calcium content led to accelerated set-up times, increased compressive strength, and increased product formation. Powder X-ray diffraction results showed the majority of that product to be geopolymer framework with only minor contributions from calcium silicate phases. Thermal analysis confirmed the absence of a calcium silicate hydrate phase. Analysis of fly ash dissolution showed that calcium aided in aluminosilicate dissolution and therefore the geopolymerization reaction. While aiding in this reaction, calcium became incorporated into the pore structure of the geopolymer as a counter-balancing cation, according to ion exchange experiments. Thus, geopolymer synthesis with increased calcium content through the use of a high-calcium fly ash under these experimental conditions produced a quick-setting, strong, calcium incorporated geopolymer material.     

Tensile behaviour of patch-repaired CFRP laminates

The present study examines the tensile behaviour of composite structures repaired by bonding external patches. Various patches of different stacking sequences placed on both sides of the parent plate were considered. Damage development and the failure process of the repaired plates were analyzed and a parent plate fracture model has been proposed. Optimised patch repairs were calculated by finite element modelling. It was found that high stress concentration along the longitudinal edges of circular patches and/or at the transverse edges of the hole leads to early damage initiation in the parent plate. However, the position of damage initiation and the process of damage progression depend particularly on the properties of repair patches. In order to optimise patch repairs, finite element modelling was used and it was founded possible to attain over 90% of the strength of an unnotched specimen. The optimised patch design can be characterised by an optimal strength ratio R^*, which should be minimized when selecting repair parameters.