Simultaneous design of power stage and controller for switchingpower supplies

This paper develops a method for simultaneously designing the power stage and controller for a switching power supply. The method utilizes a numerical optimization procedure, which facilitates computer-aided design. It is found that better performance can be achieved than with a traditional two-step design process, where the power stage and controller are designed sequentially. Optimization and simulation results for a buck power converter are presented to illustrate the design process and benefits     

Durability of polymeric glazing materials for solar applications

The economic viability of solar collector systems for domestic hot water (DHW) generation is strongly linked to the cost of such systems. Installation and hardware costs must be reduced by 50% to allow significant market penetration. An attractive approach to cost reduction is to replace glass and metal parts with less expensive, lighter weight polymeric components. Weight reduction decreases the cost of shipping, handling, and installation. The use of polymeric materials also allows the benefits and cost savings associated with well established manufacturing processes, along with savings associated with improved fastening, reduced part count, and overall assembly refinements. A key challenge is to maintain adequate system performance and assure requisite durability for extended lifetimes. Results of preliminary and ongoing screening tests for a large number of candidate polymeric glazing materials are presented. Based on these results, two specific glazings with moderate and poor weathering stability are selected to demonstrate how a service lifetime methodology can be applied to accurately predict the optical performance of these materials during in-service use. A summary is given for data obtained by outdoor exposure and indoor testing of polyvinyl chloride (PVC) and high temperature modified polycarbonate copolymer (coPC) materials, and an initial risk analysis is given for the two materials. Screening tests and analyses for service lifetime prediction are discussed. A methodology that provides a way to derive correlations between degradation experienced by materials exposed to controlled accelerated laboratory exposure conditions and materials exposed to in-service conditions is given, and a validation is presented for the methodology based upon durability test results for PVC and coPC.     

RAP46 is a negative regulator of glucocorticoid receptor action and hormone-induced apoptosis

RAP46 was first identified by its ability to bind the glucocorticoid receptor. It has since been reported to bind several cellular proteins, including the anti-apoptotic protein Bcl-2, but the biological significance of these interactions is unknown. Here we show that RAP46 binds the hinge region of the glucocorticoid receptor and inhibits DNA binding and transactivation by the receptor. We further show that overexpression of RAP46 in mouse thymoma S49.1 cells inhibits glucocorticoid-induced apoptosis. Conversely, glucocorticoid-induced apoptosis and transactivation were enhanced after treating S49.1 cells with the immunosuppressant rapamycin, which down-regulates cellular levels of BAG-1, the mouse homolog of RAP46. The effect of rapamycin can, however, be overcome by overexpression of RAP46. These results together identify RAP46 as a protein that controls glucocorticoid-induced apoptosis through its negative regulatory action on the transactivation property of the glucocorticoid receptor.     

Location of the sacral pedicle, foramina, and ala on the lateral aspect of the sacrum: a radiographic study

Twenty-one adult dry-bone sacral specimens were used to quantitatively determine the location of the sacral pedicle, foramina, and ala on the lateral radiographic view of the sacrum. The anterior and posterior sacral foramina from S1 to S3, the midlines of the anterior sacrum and cephalad border of the S1 vertebral body, and the lateral limit of the lateral sacral mass were outlined with wires. A lateral radiograph was taken, and measurements were made directly from the radiograph. The average sacral pedicle height for both male and female specimens was approximately 20 mm for S1, 12 mm for S2, and 7 mm for S3. The sacral foramina height averaged approximately 13 mm for S1 and S2, and 10 mm for S3. The average ala and S1 body-ala angles were 88 degrees and 35 degrees. The distance from the ala tip to the anterior aspect of the sacrum averaged 12 mm, and the average anterior height of the S1 vertebral body above the ala was 11 mm. These measurements, in conjunction with inlet and outlet radiographs, may aid in the recognition of the vital structures of the sacrum on the lateral radiographic view and enhance the safety of dorsal sacral screw placement.     

Reinigung lösungsmittelhaltiger Abluft – alternative Möglichkeiten

Purification of solvents containing air – Alternative methods. Different processes are used for the purification of solvents containing air: condensation, absorption, adsorption, combustion, membrane permeation, and biofilters or bioscrubbers. The processes will be explained by examples. The specifications required by “TA Luft” often cannot be reached only by condensation and membrane permeation. The success of absorption depends on the scrubbing liquid. Glycol ethers are useful scrubbing liquids – especially for chlorinated hydrocarbons. The choice of the process depends on the volume flow rate, the solvent concentration, and the kind of solvent. Recycling of the solvents reduces the costs of the process.     

Inhibition of neuronal calcium channels by a novel peptide spider toxin, DW13.3

Peptide toxins have proved to be useful agents, both in discriminating between different components of native calcium channel currents and in the molecular isolation and designation of their cloned channel counterparts. Here, we describe the isolation and characterization of the biochemical and physiological properties of a novel 74-amino acid peptide toxin (DW13.3) extracted from the venom of the spider Filistata hibernalis. The subtype specificity of DW13.3 was investigated using calcium channel currents recorded from two separate expression systems and several different cultured mammalian cell preparations. Overall, DW13.3 potently blocked all native calcium channel currents studied, with the exception of T-type currents recorded from GH3 cells. Examination of transiently expressed calcium channels in oocytes showed that DW13.3 had the highest affinity for alpha1A, followed by alpha1B > alpha1C > alpha1E. The affinity of DW13.3 for alpha1B N-type currents varied by 10-fold between expressed channels and native currents. Although block occurred in a similar 1:1 manner for all subtypes, DW13.3 produced a partial block of both alpha1A currents and P-type currents in cerebellar Purkinje cells. Selective occlusion of the P/Q-type channel ligand omega-conotoxin MVIIC (but not omega-agatoxin IVA) from its binding site in Purkinje neurons suggests that DW13.3 binds to a site close to the pore of the channel. The inhibition of different subtypes of calcium channels by DW13.3 reflects a common "macro" binding site present on all calcium channels except T-type.     

Polycrystalline silicon-germanium films for integrated microsystems

Two approaches were demonstrated for fabricating microstructures after completion of CMOS circuits with aluminum metallization. The first approach employed n-type poly-Ge deposited at 400/spl deg/C as a structural material with an SiO/sub 2/ sacrificial layer and an HF release. The CMOS circuits were protected from the release etchant with an amorphous Si layer. Clamped-clamped lateral resonator test structures had quality factors in vacuum as high as /spl sim/30000. Following a 500/spl deg/C, 30 s RTA the poly-Ge stress was 200 MPa (tensile) and the resistivity was 5.3 m/spl Omega/-cm. In the second integration approach, p-type poly-Si/sub 0.35/Ge/sub 0.65/ deposited at 450/spl deg/C was the structural material with poly-Ge as the sacrificial material and H/sub 2/O/sub 2/ as the release etchant. The H/sub 2/O/sub 2/ did not significantly etch the p-type poly-SiGe structural layer and no protection of the underlying CMOS layers was needed. For the first time, the fabrication of LPCVD surface microstructures directly on top of standard electronics was demonstrated, providing dramatic reductions in both MEMS-CMOS interconnect parasitics and device area. A folded flexure lateral resonator had a quality factor in vacuum as high as /spl sim/15000. No stress or dopant-activation anneal was needed, since the in situ boron-doped poly-SiGe was found to have an as-deposited stress of only -10 MPa (compressive) and a resistivity of only 1.8 m/spl Omega/-cm.     

Computational Nonlinear Thermomechanical Model of Large Light Partition Walls Based on Experimental Analysis and Probabilistic Models

Abstract: This article is devoted to the construction of a computational nonlinear thermomechanical model of large light partition walls made up of cardboard‐plasterboard‐cardboard (CPC) plates screwed to a metallic frame, and is submitted to mechanical and thermal loadings induced by fire. The computational model, based on experimental analysis and a probabilistic modeling, is developed for the prediction of a large light partition wall for (1) its linear thermal behavior, (2) its nonlinear mechanical behavior, and (3) its nonlinear thermomechanical behavior.     

Modification of the La0.6Sr0.4CoO3 coating deposited on ferritic stainless steel by spray pyrolysis after oxidation in air at high temperature

The behaviour of La_0.6Sr_0.4CoO₃ applied to ferritic stainless steel (AISI 430) by spray pyrolysis was investigated after oxidation at 800 °C in air. The film was characterized with regard to its morphology, structure and adhesion. The film was regular over the entire surface and adhered well to the metallic substrate. Oxidation modified the film structure, forming an oxide (SrCrO₄) in the metal/coating region due to Sr diffusion from the coating and Cr diffusion from the metallic substrate. A thermodynamic computational simulation confirmed the formation and stability of this oxide.     

Postinfectious antirabic vaccination of children with duck embryo vaccine and heterologous rabies hyperimmunity serum (author's transl)

After contact with a rabies-infected rabbit, 31 Persons were submitted to complete vaccination treatment with duck embryo vaccine, comprising of injections of 1.0 ml each every fast night and two booster injections of 1.0 ml each, which were administered 10 and 20 days, respectively, after the end of the 14 days' vaccination series. After performance of intracutaneous and ophthalmic tests, 18 children received heterologous rabies immunserum (Behring) in a dose of 0.2 ml per kg of body weight before the beginning of the vaccination series. Six weeks after the start of the vaccination series neutralizing and complement-fixing antibodies (rate of conversion 100 per cent) were detected in all patients. The mean titre of neutralizing antibodies (mouse test 200 LD 50 Fixed virus, strain CVS) amounted to 1:140, that of complement-fixing antibodies to 1:41. Severe incompatibility reactions were not observed. Outpatient treatment with duck embryo vaccine therefore seems to be fully justified.