Moving loads on flexible structures presented in the floating frame of reference formulation

The introduction of moving loads in the Floating Frame of Reference Formulation is presented. We derive the kinematics and governing equations of motion of a general flexible multibody system and their extension to moving loads. The equivalence of convective effects with Coriolis and centripetal forces is shown. These effects are measured numerically and their significance in moving loads traveling at high speed is confirmed. A method is presented to handle discontinuities when moving loads separate from the flexible structure. The method is extended from beam models to general flexible structures obtained by means of the Finite Element Method. An interpolation method for the deformation field of the modal representation of these bodies is introduced.The work is concluded by application of the method to modern mechanical problems in numerical simulations.     

A 2 MV Van de Graaff accelerator as a tool for planetary and impact physics research

Investigating the dynamical and physical properties of cosmic dust can reveal a great deal of information about both the dust and its many sources. Over recent years, several spacecraft (e.g., Cassini, Stardust, Galileo, and Ulysses) have successfully characterised interstellar, interplanetary, and circumplanetary dust using a variety of techniques, including in situ analyses and sample return. Charge, mass, and velocity measurements of the dust are performed either directly (induced charge signals) or indirectly (mass and velocity from impact ionisation signals or crater morphology) and constrain the dynamical parameters of the dust grains. Dust compositional information may be obtained via either time-of-flight mass spectrometry of the impact plasma or direct sample return. The accurate and reliable interpretation of collected spacecraft data requires a comprehensive programme of terrestrial instrument calibration. This process involves accelerating suitable solar system analogue dust particles to hypervelocity speeds in the laboratory, an activity performed at the Max Planck Institut fu?r Kernphysik in Heidelberg, Germany. Here, a 2 MV Van de Graaff accelerator electrostatically accelerates charged micron and submicron-sized dust particles to speeds up to 80 km s(-1). Recent advances in dust production and processing have allowed solar system analogue dust particles (silicates and other minerals) to be coated with a thin conductive shell, enabling them to be charged and accelerated. Refinements and upgrades to the beam line instrumentation and electronics now allow for the reliable selection of particles at velocities of 1-80 km s(-1) and with diameters of between 0.05 μm and 5 μm. This ability to select particles for subsequent impact studies based on their charges, masses, or velocities is provided by a particle selection unit (PSU). The PSU contains a field programmable gate array, capable of monitoring in real time the particles' speeds and charges, and is controlled remotely by a custom, platform independent, software package. The new control instrumentation and electronics, together with the wide range of accelerable particle types, allow the controlled investigation of hypervelocity impact phenomena across a hitherto unobtainable range of impact parameters.     

Eine Dienstgüte unterstützende Webservice-Architektur für flexible Geschäftsprozesse

Web services as a technology to enable distributed business processes gain in importance. However, the support of Quality of Service (QoS) is crucial in this context. Thus, we present an integrated web service architecture with comprehensive QoS support. The architecture we introduce in this paper supports the assessment of web services to assure that only web services will be used in critical business processes that satisfy the requirements defined by the user. The selection and execution of a certain web service depends on its QoS-properties that must be guaranteed in Service Level Agreements (SLAs). The compliance with SLAs is monitored by the system as well. Furthermore we introduce a prototypical implementation of our web service architecture.     

Basalioma terebrans of trunk skin. A neglected tumor

Small basal cell carcinomas of the trunk are usually regarded as relatively harmless. In contrast, large and ulcerating basal cell carcinomas may become a therapeutic challenge with a less favourable prognosis and high risk of recurrence. The development of mutilating giant basal cell carcinomas appears less due to the biological aggressive character of the tumors, but rather to the patients' attitude of neglect. The case of a 62-year-old patient, featuring such attitude, demonstrates how a common basal cell carcinoma of the trunk can grow over a period of years to a troublesome ulcerating tumor.     

Thesen und Trends – Mit funktionalen Oberflächen in die Zukunft

Propositions and Trends – With Functional Surfaces into the Future Functional surfaces are the key to innovative products. Already today the properties, lifetime, and costs for most industrial and consumer products are determined by functionalised surfaces. Three Fraunhofer Institutes supported by the BMBF investigated the actual state of the art of production technology regarding functional surfaces, their future perspectives and the research and development demand. The results are published in the study “Production technology for the generation of functional surfaces” available at info@ist.‐ fraunhofer.de and the essentials are summarised in this article.     

Frequency-dependent losses on high-performance interconnections

This paper compares the major classes of chip-to-chip and on-chips interconnections used in high-performance computers and communication systems and reviews their electrical characteristics. Measurement results of dielectric loss are shown and the attenuation is compared for printed-circuit-board, glass-ceramic, thin-film, and on-chip wiring. Simulation results are shown with representative driver and receiver circuits, guidelines are given for when losses are significant, and predictions are made for the sustainable bandwidths on useful wiring lengths     

The effect of exercise and rehabilitation on anterior-posterior knee displacements after anterior cruciate ligament autograft reconstruction

We studied the effect of rehabilitation strength training and return to activities on anterior-posterior knee displacements after patellar tendon autogenous anterior cruciate ligament reconstruction. A total of 938 measurements were sequentially collected for 142 patients with the KT-2000 arthrometer. Rehabilitation included immediate knee motion and early weightbearing, light sports at 6 months, and competitive sports at 8 months or later. At a minimum of 2 years after surgery, 121 patients (85%) had normal displacements (less than 3 mm of increase at 134 N), 14 (10%) had 3 to 5.5 mm of increase (partial function), and 7 (5%) had more than 5.5 mm of increase (failed). There was no association found between the initial onset of the abnormal displacements in the 21 knees and either the amount of time after surgery or the rehabilitation program. Six of the seven grafts that failed did so in the 1st postoperative year. Serial displacement measurements allow early detection of graft stretching and subsequent modification of rehabilitation or delay in return to strenuous activities. These measurements showed that the rehabilitation program used in this study was not itself injurious and resulted in an acceptable failure rate of 5%.     

Me-DLC films as material for highly sensitive temperature compensated strain gauges

In technical applications strain gauges are widely used. Apart from conventional polymer foil based strain gauges that are glued to the work piece surface, sputtered strain gauges are already commercially used in special applications. Those sputter strain gauges are typically made of NiCr alloy and the sensor layer is as sensitive to strain as the ones used in the glued strain gauges with a gauge factor of 2, but neglecting problems of creeping and swelling of the involved polymer materials. Diamond-like carbon (DLC) films offer significantly higher strain sensitivity, but usually they are also very sensitive to temperature effects. Using metal doped diamond-like carbon (Me-DLC), higher strain sensitivity than conventional metal based systems, in combination with thermal compensation, is possible. The influence of different process parameters on the gauge factor and temperature coefficient of resistance (TCR) of DLC and Me-DLC films produced in industrial sputtering systems was investigated. Gauge factors up to 13 in combination with a high negative TCR in the range of a few thousand ppm/K were reached with sputtered DLC films. The substrate bias voltage in particular showed a strong influence on the resulting gauge factor of the films. For Me-DLC films different deposition methods (dc and rf sputtering) and various doping metals (Ag, Ni, Ti, and W) were investigated. Using dc sputtering of the Me-DLC films only Ni-DLC showed gauge factors slightly higher than 2. Furthermore, only for Ni-DLC zero crossing of the TCR was observed by variation of the metal content. Using rf excitation especially Ni-DLC films showed gauge factors exceeding values of 15 in combination with a TCR close to zero.