Stabilization techniques for spectral methods

We introduce a stabilized treatment of spectral methods. The condition number of the spectral systems is highly improved. Elliptic and biharmonic problems are considered. Suitable interpolants in the case of inhomogeneous Dirichlet boundary conditions are presented. For a direct solver the improvements with respect to rounding error propagation are numerically demonstrated.     

Mechanisms of Transfer of Aluminium to PVD-Coated Forming Tools

Cold forging is a group of methods effectively used in a number of industrial applications to form aluminium. Tool life and complexity of the possible shapes are mainly restricted by galling; the uneven tool surfaces caused by lumps of transferred material lead to surface damage on successive parts formed and/or problems in successive forming operations, and high stresses occurring when forming complex shapes. Earlier investigations have shown that improved surface roughness of an uncoated steel tool decreases the amount of adhered aluminium on the tool, but does not decrease the friction in the long run. Testing has also shown that when using conventional forming tools it is very important to have sufficient lubrication to avoid galling. Addition of an optimized low-friction PVD-coating decreases the galling tendency and increases the tolerance to insufficient lubrication and lubricant film breakthrough, as long as the coating surface is smooth, whilst other similar coatings have little or no effect. The present article further investigates the mechanism behind the transfer of aluminium to the coatings. All coatings were found to be intact after testing, and so the differences were concluded to lie in the chemical properties of the coating and, if these are favourable, then in surface roughness on the micro scale.     

Three-dimensional imaging laser radar with a photon-counting avalanche photodiode array and microchip laser

We have developed a threedimensional imaging laser radar featuring 3-cm range resolution and single-photon sensitivity. This prototype direct-detection laser radar employs compact, all-solid-state technology for the laser and detector array. The source is a Nd:YAG microchip laser that is diode pumped, passively Q-switched, and frequency doubled. The detector is a gated, passively quenched, two-dimensional array of silicon avalanche photodiodes operating in Geigermode. After describing the system in detail, we present a three-dimensional image, derive performance characteristics, and discuss our plans for future imaging three-dimensional laser radars.     

Snow metamorphism as revealed by scanning electron microscopy

Current theories of snow metamorphism indicate that sublimating snow crystals have rounded shapes, while growing crystals have shapes that depend on growth rates. At slow growth rates, crystals are rounded. At moderate rates, they have flat faces with rounded edges. At fast growth rates, crystals have flat faces with sharp edges, and they have hollow faces at very fast growth rates. The main growth/sublimation mechanism is thought to be by the homogeneous nucleation of new layers at or near crystal edges. It was also suggested that the equilibrium shape of snow crystals would be temperature dependent: rounded above -10.5 degrees C, and faceted below. To test these paradigms, we have performed SEM investigations of snow samples having undergone metamorphism under natural conditions, and of snow samples subjected to isothermal metamorphism at -4 degrees and -15 degrees C in the laboratory. In general, current theories predicting crystal shapes as a function of growth rates, and of whether crystals are growing or sublimating, are verified. However, the transition in equilibrium shapes from rounded to faceted at -10.5 degrees C is not observed in our isothermal experiments that reveal a predominance of rounded shapes after more than a month of metamorphism at -4 and -15 degrees C. Some small crystals with flat faces that also have sharp angles at -15 degrees C, are observed in our isothermal experiments. These faces are newly formed, and contradict current theory. Several hypotheses are proposed to explain their occurrence. One is that they are due to sublimation at emerging dislocations.     

Effects of feeding different levels of dietary fiber through the addition of corn stover on nutrient utilization of dairy heifers precision-fed high and low concentrate diets

The objective of this experiment was to assess the effects of manipulating dietary fiber by replacing corn silage (CS) with lower quality forage as corn stover (CST) when used in high concentrate (HC) and low concentrate (LC) diets for precision-fed dairy heifers. Eight Holstein heifers (335.6 ± 7.41 kg of body weight) were randomly assigned to 2 levels of concentrate: HC (20% forage) and LC (80% forage), and to a forage type sequence [0% of forage as corn stover (CST), 100% corn silage (CS); 20% CST, 80% CS; 40% CST, 60% CS; and 60% CST, 40% CS] within concentrate level administered according to a split-plot, 4 × 4 Latin square design (21-d periods). Heifers fed HC had higher apparent total-tract dry matter digestibility (DMD). Increasing the fiber level by increasing the amount of CST in the diet resulted in a linear decrease of DMD and organic matter digestibility. Heifers fed LC diets had higher neutral detergent fiber (NDF) digestibility and tended to have lower acid detergent fiber (ADF) digestibility than those fed HC diets. Substituting CS with 20% CST resulted in the highest NDF and ADF digestibilities. Digestibility of N was not different, but N retention increased for HC and decreased quadratically for LC diets. Heifers fed HC diets decreased fecal output, and CST linearly increased these parameters. Urine volume tended to be higher for HC-fed heifers, and increasing dietary fiber through CST inclusion tended to decrease urine output. This shift in water excretion resulted in similar total manure output. Total purine derivative excretion did not differ between treatments, but interacted with CST addition, resulting in a linear increase in microbial protein flow to the duodenum in HC-fed heifers and in a linear decrease in LC diets as CST increased. In conclusion, increasing dietary fiber through CST decreased DMD and organic matter digestibility linearly, whereas NDF and ADF digestibility were maximized when 20% CST was added to HC and LC diets. Microbial protein synthesis increased and decreased linearly with CST addition in HC and LC diets, respectively. Retention of N increased and decreased quadratically with CST addition in HC and LC diets, respectively. Total manure excretion was not different between HC or LC diets.     

The influence of head restraint and occupant factors on peak head/neck kinematics in low-speed rear-end collisions.

Prior two-way analyses of variance showed that the peak kinematic response of the head and neck of subjects exposed to low-speed rear-end collisions was related to speed change and gender, however potential reasons for this gender dependence were not determined. Using multiple linear regression, this study further examined these response data to determine the relative influence of specific factors, including subject anthropometry, neck strength, cervical range of motion, seated posture and head restraint position, which may have been responsible for the previously-observed gender dependence. The results of this analysis showed that vehicle speed change and relative head restraint position explained the largest proportion of the observed variation in peak occupant kinematic response. Seated posture measures also explained some of the variation in kinematic response. The current analysis prioritizes which variables to explore more thoroughly in future research and which variables should be carefully controlled in future studies.