Multipath structure for FSR expansion in waveguide-based optical ring resonator

A multipath structure of a ring resonator is proposed to expand the free spectral range. Simulation work indicates that the multipath ring resonator has 25 GHz-adjacent-channel crosstalk of -41 dB, maximum interchannel crosstalk of -18 dB, and -1 dB bandwidth of 4 GHz for a typical expansion factor of 10. The results show the advantages of characteristics compared with a double-cavity ring resonator and a triple-coupler ring resonator.     

Optical Endless Polarization Stabilization at 9 krad/s With FPGA-Based Controller

We demonstrate endless polarization stabilization with a control speed of up to 9 krad/s, over random Poincare sphere trajectories. These are in total >35 Mrad long, are composed in particular of difficult-to-track circles with all radii and orientations, and thereby include all possible worst cases. The maximum polarization mismatch and relative intensity errors are 0.13 rad and 0.43%, respectively. The controller runs on a field-programmable gate array and uses a commercial multistage LiNbO₃ polarization transformer as the control device.     

Langerhans' cell histiocytosis and juvenile xanthogranuloma of the orbit. Clinicopathologic, CT, and MR imaging features

The clinical, radiologic, and histopathologic features of two main disorders of the orbit are discussed. Group I, Langerhans cell histiocytosis (histiocytosis X, Class I), is caused by proliferation of X histiocytic Langerhans' cells. Group II is juvenile xanthogranuloma, and Class II is related to the proliferation of non-X histiocytic (monocyte-macrophage) cells. The two diseases are of unknown cause and differ in their clinical, radiologic, and histopathologic features.     

A computational investigation of non-isothermal gas-solid flow in a U-bend

The non-isothermal gas-solid flow through a U-bend of a pneumatic conveying dryer system is calculated using the commercial CFD program Fluent 6.1. Steady-state, incompressible and non-isothermal gas-solid flows are employed to simulate the cases. Variables studied include: particle diameter, particle density, solid loading ratio, feed gas temperature, heat flux through the wall, gas velocity and bend radius ratio on heat transfer phenomena between gas and solid particles. Validation is done by comparing calculation results with the available experimental data provided by Baughn et al. [J.W. Baughn, H. Iacovides, D.C. Jackson, B.E. Launder, Local heat transfer measurements in turbulent flow around a 180° pipe bend, Journal of Heat Transfer 109 (1) (1987) 43-48] and Depew and Farbar [C.A. Depew, L. Farbar, Heat transfer to pneumatically conveyed glass particles of fixed size, Journal of Heat Transfer 85 (1963) 164-172].In general, data validations of both cases show good agreement. The gas temperature decreases and the solid temperature increases along the axial direction of the pipe due to transfer of heat from the gas phase to the solid phase. The gas temperature decreases significantly at the outer bend wall due to an accumulation of particles, which causes much more energy to be transferred from the gas to solid phases. At the inner bend wall, the gas temperature decreases slightly but the solid temperature increases significantly due to a low concentration of particles. A U-bend significantly increases the local and area average Nu numbers, but not the mass average Nu number. The slip velocity and particle distribution are the major factors influencing the value of the mass average Nu number.     

Visual Contact Angle Estimation and Traction Control for Mobile Robot in Rough-Terrain

For a wheeled mobile robot traversing a rough terrain, knowledge of terrain variables is very important for developing effective traction control algorithms. A key variable of the most prevalent information that should be taken into account is the contact angle between the robot wheels and the ground. This paper presents an algorithm for visual estimation of wheel-ground contact angle on uneven terrain. We call it the Visual Contact Angle Estimation (VCAE) method. Given a white LED light source, a monocular camera is required to be mounted on the front wheel and the rear wheel respectively, with a field of view containing the wheel-ground contact interface and its location relative to the wheel is known and fixed during robot travel. This arrangement is used to measure the contact angle with an edge detection strategy. Then a traction control methodology based on multi-objective optimization is presented. This exploits the wheel-ground contact angle obtained in the VCAE system to improve ground traction and reduce power consumption. Simulation and experiment results for a wheeled robot traversing a symmetrical uneven testbed demonstrate the effectiveness of the VCAE method and traction control algorithms.     

Predictive and content-aware load balancing algorithm for peer-service area based IPTV networks

Load balancing is a crucial factor in IPTV delivery networks. Load balancing aims at utilizing the resources efficiently, maximizing the throughput, and minimizing the request rejection rate. The peer-service area is the recent architecture for IPTV delivery networks that overcomes the flaws of the previous architectures. However, it still suffers from the load imbalance problem. This paper investigates the load imbalance problem, and tries to augment the peer-service area architecture to overcome this problem. To achieve the load balancing over the proposed architecture, we suggest a new load-balancing algorithm that considers both the expected and the current load of both contents and servers. The proposed load-balancing algorithm consists of two stages. The first stage is the contents replication according to their expected load, while the second stage is the content-aware request distribution. To test the effectiveness of the proposed algorithm, we have compared it with both the traditional Round Robin algorithm and Cho algorithm. The experimental results depict that the proposed algorithm outperforms the two other algorithms in terms of load balance, throughput, and request rejection rate.     

Implementation of genetic algorithm in an embedded microcontroller-based polarization control system

Implementation of genetic algorithm in a PIC32MX microcontroller-based polarization control system is proposed and demonstrated. The controller measures the signal intensity that is used to estimate the genetic value. This process is controlled by the genetic algorithm rather than referring to the Look-Up-Table as implemented in existing solutions. To reach optimum performance, the code is optimized by using the best genetic parameters so that the fastest execution time can be achieved. An ability of genetic algorithm to work efficiently in polarization control system possesses many advantages including easy code construction, low memory consumption and fast control speed. Genetic algorithm is intelligent enough to be used for endless polarization stabilization and in the worst case, able to stabilize the polarization changes in 300 μs. In the best case the response time can reach 17 μs.     

Experimental Study of Ferrous Calcium Silicate Slags: Phase Equilibria at {\text{P}}_{{{\text{O}}_{2} }} Between 10?5?atm and 10?7?atm

Ferrous calcium silicate slags, whose principal components are “FeO _x ”-CaO-SiO₂, are widely used in copper smelting and converting operations. In the current study, high-temperature equilibration and rapid quenching techniques were used to study the phase equilibria of the ferrous calcium silicate slags. The compositions of phases in the slags were measured accurately using electron probe X-ray microanalysis (EPMA). The phase equilibria of the system have been characterized at oxygen partial pressures between 10⁻⁵ atm and 10⁻⁷ atm at selected temperatures between 1473 K and 1623 K (1200 °C and 1350 °C). The effects of oxygen partial pressure and temperature on the compositions of phases in the slags are presented.     

High-efficiency remediation of cadmium (Cd2+) from aqueous solution using poultry manure– and farmyard manure–derived biochars

Farmyard manure (FYM-BC) and poultry manure (PM-BC) derived biochars were applied as adsorbents to remove Cd²⁺ from water. Results indicated that PM-BC was a more efficient adsorbent than FYM-BC at all experimental conditions. Maximum Cd²⁺ adsorption was observed at pH 4, temperature 318 K and contact time 1 h, regardless of biochar type. The Langmuir model predicted maximum adsorption capacity of 90.09 mg g^?1 for PM-BC. The data fitting to pseudo-second-order model proposed chemisorption of Cd²⁺ onto biochars. Thermodynamics indicated that adsorption was spontaneous and endothermic. Post-adsorption analysis provided evidences of strong chemical interactions between biochars’ functional groups and Cd²⁺ ions.