Development of flexible displays using back‐channel‐etched In–Sn–Zn–O thin‐film transistors and air‐stable inverted organic light‐emitting diodes

We developed flexible displays using back‐channel‐etched In–Sn–Zn–O (ITZO) thin‐film transistors (TFTs) and air‐stable inverted organic light‐emitting diodes (iOLEDs). The TFTs fabricated on a polyimide film exhibited high mobility (32.9 cm²/Vs) and stability by utilization of a solution‐processed organic passivation layer. ITZO was also used as an electron injection layer (EIL) in the iOLEDs instead of conventional air‐sensitive materials. The iOLED with ITZO as an EIL exhibited higher efficiency and a lower driving voltage than that of conventional iOLEDs. Our approach of the simultaneous formation of ITZO film as both of a channel layer in TFTs and of an EIL in iOLEDs offers simple fabrication process.     

Fabrication of 5.8‐in. OTFT‐driven flexible color AMOLED display using dual protection scheme for organic semiconductor patterning

Abstract— A 5.8‐in. wide‐QQVGA flexible color active‐matrix organic light‐emitting‐diode (AMOLED) display consisting of organic thin‐film transistors (OTFTs) and phosphorescent OLEDs was fabricated on a plastic film. To reduce the operating voltage of the OTFTs, Ta₂O₅ with a high dielectric constant was employed as a gate insulator. Pentacene was used for the semiconductor layer of the OTFTs. This layer was patterned by photolithography and dry‐etched using a dual protection layer of poly p‐xylylene and SiO₂ film. Uniform transistor performance was achieved in the OTFT backplane with QQVGA pixels. The RGB emission layers of the pixels were formed by vacuum deposition of phosphorescent small molecules. The resulting display could clearly show color moving images even when it was bent and operated at a low driving voltage (below 15 V).     

Experimental implementation and analysis of robotic metal spinning with enhanced trajectory tracking algorithms

Metal spinning is a plastic forming process in which a disk or tube of metal is rotated at high speed and forced onto a mandrel. It is widely used in industry as an efficient, modern and economical production technique. This research proposes to develop a versatile robotic forming method and expand the application areas of robotic manufacturing processes to the metal spinning area. A lathe-type laboratory setup has been built and an industrial robot manipulator has been used to implement the metal spinning process. Experiments have been conducted with enhanced cascaded trajectory tracking algorithms with an add-on vibration suppressor. The potential of the proposed method has been illustrated with extensive case studies using both constant and variable speed trajectory profiles. Analyses for the growth of wrinkles have been performed through the topographical measurements of the products and the forming forces have been inspected. Results indicate that the efficiency of the process can be significantly improved with suitably selected variable speed trajectory profiles and the process parameters. The developed scheme successfully reduces the excessive oscillations of the manipulator during the metal spinning process and it requires no additional hardware to employ. The investigations demonstrate the feasibility of robotic metal spinning using an industrial serial link manipulator.     

Mechanism of elongation of gold or silver nanoparticles in silica by irradiation with swift heavy ions

It has been reported that elongated Au nanoparticles oriented parallel to one another can be synthesized in SiO₂ by ion irradiation. Our aim was to elucidate the mechanism of this elongation. We prepared Au and Ag nanoparticles with a diameter of 20 nm in an SiO₂ matrix. It was found that Au nanoparticles showed greater elongated with a higher flux of ion beam and with thicker SiO₂ films. In contrast, Ag nanoparticles split into two or more shorter nanorods aligned end to end in the direction parallel to the ion beam. These experimental results are discussed in the framework of a thermal spike model of Au and Ag nanorods embedded in SiO₂. The lattice temperature exceeds the melting temperatures of SiO₂, Au and Ag for 100 ns after one 110 MeV Br¹⁰⁺ ion has passed through the middle of an Au or Ag nanorod.     

Valence Band Structure of ZnO (1010) Surface by Cluster Calculation

Discrete variational (DV) Xα cluster method has been employed in calculating electronic structures of ZnO. Electronic structures of the bulk and the non-polar surface model clusters are calculated with inclusion of electrostatic potentials in the bulk and near the surface, and the electronic origins of experimental spectra and chemical bonds at the surface are examined in detail. The valence band structure constructed by Zn-3d and O-2p bands is much influenced by electrostatic potentials in ZnO. It is found that the reduction of an electrostatic potential near the surface gives rise to the difference of the valence band structures between in the bulk and at the surface. The calculated density of states at the non-polar surface of ZnO, where the Zn-3d and O-2p bands are more widely separated than in the bulk, is in good agreement with the experimental UPS. In addition, a Zn-O bond at the surface is found to show stronger covalency than that in the bulk, as a result of the change of the valence band structure due to the effect of the electrostatic potential.     

Environmental ecological modeling of human blood lead levels in East Asia

Environmental ecological modeling (EEM), which unifies models simulating transport of chemicals and exposure of humans to chemicals, was used to simulate long-term trends of female adult human blood lead levels (BLLs) and historical exposure to the atmospheric lead in four East Asian countries: Japan, Korea, China, and Vietnam. Anthropogenic lead emissions to the atmosphere in Vietnam were estimated from energy statistics to be 1931 t yr(-1). Calculated BLLs generally agreed with those observed in samples collected in these countries as the error factors were less than 2. The model results revealed that BLLs decreased significantly in Tokyo (by 58%) and Seoul (by 45%) in recent decades and confirmed the effects of efforts to reduce environmental lead in Japan and Korea. The model results also revealed that BLLs in Beijing did not decrease in this decade as much as in Tokyo and Seoul, despite the phasing out of leaded gasoline, and that the contribution from the atmospheric component was increasing (43% in 2009). Finally, we applied EEM to simulate BLLs of children in Hanoi. The probability of children having BLLs greater than 50 μg L(-1) was 7.5%, which was greater than those observed in developed countries.     

藏北高原典型草甸下垫面与HEIFE沙漠区辐射平衡气候学特征对比分析

利用中日合作“全球能量与水分平衡试验一青藏高原季风试验(GAME—Tibet)”和中日合作“黑河地区地一气相互作用野外观测实验研究(HEIFE)”IOP、FOP资料,计算分析了藏北高原典型草甸下垫面安多站和HEIFE沙漠站的辐射平衡各相关特征量时频变化的气候学特征。结果表明：无论是高原安多站还是黑河沙漠站,夏季均出现超太阳常数现象(只是安多更为明显);总辐射、大气逆辐射、地表长波辐射、地表有效辐射和地表辐射平衡等的日变化(晴天)无论是安多站还是沙漠站均表现为早晚出现最小值而正午附近(地方时)达到最大值,而地表反照率的日变化(晴天)相反表现为早晚大而正午附近小的规律;上述各分量均表现有程度不等的季节变化规律：总辐射、大气逆辐射、地表长波辐射和地表辐射平衡均表现为夏半年增大达到最大值百而冬半年降低量出现最小值;另外,大气长波辐射、地表有效辐射和地表反照率在沙漠站的年际变化的振幅较安多站更为显著和有规律。     

Prediction of mill load in hot strip mill rolling

It has been ascertained whether or not the model capable of predicting the stress-strain relation of plain carbon steels, previously proposed, is applicable to the estimation of mill loads in the finishing process (consisting of six mill stands) of a hot strip mill. An appreciably good agreement with the predicted and measured mill load values has been obtained in the earlier passes where the strip microstructure is regarded to have completed static recrystallization, and the predicted mill loads in the later passes have been far less than the measured load owing to the effect of the strain accumulated in the previous rolling process. Then, a simple model to predict the accumulated strain has been constructed and introduced into the calculation of mill loads. As a result, the predicted mill loads have been fairly improved over the whole passes in the finishing process.     

Berechnung über das Umformverhalten von Brammen beim Vertikalwalzen

Rechnerisches Modell aus starr-plastischen finiten Elementen zum Ermitteln des Umformverhaltens von Brammen beim Vertikalwalzen. Berechnungsbeispiel zum Ermitteln des Einflusses der Breitenabnahme, der Form der Walze, des Walzendurchmessers und der Brammenbreite auf den Walzvorgang.     

Human late-receptor potential and its clinical use in dyschromatopsia

The off response of the P III component isolated by aspartate in the human eyecup in vitro showed an initial rapid decay followed by a slow decay. The rapid decay in the human ERG originates mainly in cones. The rapid decay was also observed in human subjects. The spectral sensitivity curve of the rapid decay was found to be shifted toward short wavelengths in all nine protanopes tested. In these cases of protanopia, anomalous cone functions were indicated.