Local residence time,residence revolution,and residence volume distributions in twin‐screw extruders

This work was aimed at studying the overall, partial, and local residence time distributions (RTD); overall, partial and local residence revolution distributions (RRD) and overall, partial and local residence volume distributions (RVD) in a co‐rotating twin screw extruder, on the one hand; and establishing the relationships among them, on the other hand. Emphasis was placed on the effects of the type and geometry of mixing elements (a gear block and various types of kneading elements differing in staggering angle) and process parameters on the RTD, RRD and RVD. The overall and partial RTD were directly measured in‐line during the extrusion process and the local ones were calculated by deconvolution based on a statistical theory. The local RTD allowed comparing the mixing performance of mixing elements. Also it was confirmed both experimentally and theoretically that specific throughput, defined as a ratio of throughput (Q) over screw speed (N), controlled all the above three types of residence distributions, be they local, partial or overall. The RRD and RVD do not provide more information on an extrusion process than the corresponding RTD. Rather they are different ways of representing the same phenomena. POLYM. ENG. SCI., 48:19–28, 2008. © 2007 Society of Plastics Engineers     

Emotional and sensory focus as mediators of dental pain among patients differing in desired and felt dental control.

Giving patients instructions to focus on sensory (vs emotional) stimuli during a root canal procedure significantly reduced self-reported pain, but only among patients who were classified as having strong desire for control and low felt control in dental situations. Among patients with low felt control and low desire for control, sensory-focus instructions produced greater pain reports than did emotion-focus instructions. Finally, high desire–low felt patients reported higher levels of expected pain before treatment than did other patient subgroups. These data suggested limiting conditions for H. Leventhal's (1982) theory of emotion and supported the idea that desire for control might moderate the effects of perceived control. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Efficacy of a two-component acellular pertussis vaccine in infants

OBJECTIVE: This case-control study investigated the protective efficacy against pertussis of three doses of a two-component acellular pertussis vaccine (manufactured by Biken in Japan) combined with diphtheria and tetanus toxoids (manufactured by Connaught Laboratories in the US) in infants. METHODS: A case-control study was performed in 63 pediatric practices in Germany. Prospective recruitment of 16,780 infants ages 6 to 17 weeks took place between February, 1993, and July, 1994. According to parental choice infants received either Biken acellular pertussis vaccine combined with diphtheria and tetanus toxoids (DTacP) (74.6%) at approximately 2, 4 and 6 months of age, or a licensed German diphtheria-tetanus toxoids-whole cell pertussis vaccine (10.9%), diphtheria-tetanus toxoids vaccine (12.5%) or no vaccine (2.0%). Prospective surveillance of pertussis cases between February, 1993, and May, 1995, was accomplished by culturing all infants < or =2 years of age presenting with cough > or = 7 days. A pertussis case was defined as any cough of 21 days or longer plus a positive Bordetella pertussis culture or household contact exposure. RESULTS: We identified 241 pertussis cases prospectively by 11,017 B. pertussis cultures and 949 controls matched for age were selected from the same pediatric practices. Medical history and demographic and vaccine status data were collected from each case and for four controls. Data were analyzed through conditional logistic regression taking into account individual matching and adjusting for potential confounding variables. DTacP combined with diphtheria and tetanus toxoids vaccine was 82% protective (95% confidence interval, 68 to 90), diphtheria-tetanus toxoids-whole cell pertussis vaccine was 96% protective (95% confidence interval, 78 to 99). Protection against typical B. pertussis infection characterized by paroxysmal cough lasting > or =21 days was 96% (95% confidence interval, 87 to 99) for DTacP and was 97% (95% confidence interval, 79 to 100) for diphtheria-tetanus toxoids-whole cell pertussis vaccine. Adjustment for potentially confounding variables did not change the results significantly. CONCLUSIONS: Three doses of the two-component acellular pertussis vaccine protected infants against pertussis disease during the period before the recommended booster vaccination. For typical pertussis disease as defined by the WHO efficacy was high and similar to that of a licensed German diphtheria-tetanus toxoids-whole cell pertussis vaccine.     

Children's beliefs about drinking

This paper reports the results of a study in which age (grade level), racial/ethnic, and gender differences in beliefs and perceived norms about drinking were examined in a multi-ethnic urban sample of 4th through 7th grade children. Results showed that older children held beliefs and perceived norms that were more favorable toward drinking than younger children. The major difference between older and younger children lay in their differential estimates of the likelihood of certain consequences occurring and not in their evaluation of these consequences of drinking. Further, older children not only displayed less motivation to comply with their parents and greater motivation to comply with their peers, but they also perceived their parents, as well as their peers, as less disapproving of drinking than did younger children. There were few gender or race/ethnicity differences at these ages in children's beliefs and perceived norms about drinking.     

The Co-Culture of Staphylococcal Biofilm and Fibroblast Cell Line: The Correlation of Biological Phenomena with Metabolic NMR1 Footprint

Staphylococcus aureus is one of the most prevalent pathogens associated with several types of biofilm-based infections, including infections of chronic wounds. Mature staphylococcal biofilm is extremely hard to eradicate from a wound and displays a high tendency to induce recurring infections. Therefore, in the present study, we aimed to investigate in vitro the interaction between S. aureus biofilm and fibroblast cells searching for metabolites that could be considered as potential biomarkers of critical colonization and infection. Utilizing advanced microscopy and microbiological methods to examine biofilm formation and the staphylococcal infection process, we were able to distinguish 4 phases of biofilm development. The analysis of staphylococcal biofilm influence on the viability of fibroblasts allowed us to pinpoint the moment of critical colonization—12 h post contamination. Based on the obtained model we performed a metabolomics analysis by ¹H NMR spectroscopy to provide new insights into the pathophysiology of infection. We identified a set of metabolites related to the switch to anaerobic metabolism that was characteristic for staphylococcal biofilm co-cultured with fibroblast cells. The data presented in this study may be thus considered a noteworthy but preliminary step in the direction of developing a new, NMR-based tool for rapid diagnosing of infection in a chronic wound.     

Modeling of a cokneader for the manufacturing of composite materials having absorbent properties at ultra‐high‐frequency waves. Part 1: Modeling of flow from residence time distribution investigations

The purpose of this study is to gain better understanding of flow patterns and mixing conditions in a particular single‐screw extruder: the Buss Cokneader. To this end, the residence time distribution (RTD) of the polymer was investigated experimentally for different combinations of the operating variables (i.e. feed rate, screw rotation speed). The measurement of RTD used a standard stimulus‐response technique. Two kinds of tracer were used: free anthracene and anthracene grafted on the polymer. It was shown that only the second could characterize the actual flow of the polymer in the extruder. It does not perturb the flow and has the same rheological behavior as the studied fluid. Thanks to the RTD data, a model of the extruder based on the combination of ideal reactors, such as continuous stirred tank reactors or plug flow reactors, was finally set up. The establishment of relationships between model parameters and extrusion conditions allowed the prediction of RTD with good agreement.     

Beiträge zur Psychophysik des Süßgeschmacks 7. Mitt. Experimentelle Neubestimmung der Süßintensitätsparameter von Acesulfam,Aspartam, Cyclamat,Saccharin, Glucose und Sorbitol

Contributions to the psychophysics of sweet taste. Part 7. New determination of the sweetness parameters of acesulfame, aspartame, cyclamate, saccharine, dextrose and glucitol By means of a new method (double staircase) concentration pairs of equal intensity for the sweet compounds acesulfame-K, aspartame, cyclamate-Na, saccharine-Na, dextrose and glucitol were determined with sucrose on 6 or 7 equidistant scaled levels, respectively, with 4 repetitions. The parameters maximal intensity R^m, the concentration coefficient b and the mean R^m/b, respectively, are calculated for each substance from the known parameters for sucrose using the exponential function R = R_m(1 - e), which describes the sweetness intensity R in dependence of the concentration S. For exact determination of the maximal intensity the upper concentration level was fixed at very high degree. Additionally, the relative sweetness of each concentration level of each substance is calculated. In all cases the exponential function is valid without limitation. The statistical parameters are homogenous and are laying within the applied staircase method. Systematical deviations could not be found.     

Segmentation of microscope images of living cells

This paper describes a segmentation method combining a texture based technique with a contour based method. The technique is designed to enable the study of cell behaviour over time by segmenting brightfield microscope image sequences. The technique was tested on artificial images, based on images of living cells and on real sequences acquired from microscope observations of neutrophils and lymphocytes as well as on a sequence of MRI images. The results of the segmentation are compared with the results of the watershed and snake segmentation methods. The results show that the method is both effective and practical.

Classification and comparison of ligand-binding sites derived from grid-mapped knowledge-based potentials

We describe the application of knowledge-based potentials implemented in the MOE program to compare the ligand-binding sites of several proteins. The binding probabilities for a polar and a hydrophobic probe are calculated on a grid to allow easy comparison of binding sites of superimposed related proteins. The method is fast and simple enough to simultaneously use structural information of multiple proteins of a target family. The method can be used to rapidly cluster proteins into subfamilies according to the similarity of hydrophobic and polar fields of their ligand-binding sites. Regions of the binding site which are common within a protein family can be identified and analysed for the design of family-targeted libraries or those which differ for improvement of ligand selectivity. The field-based hierarchical clustering is demonstrated for three protein families: the ligand-binding domains of nuclear receptors, the ATP-binding sites of protein kinases and the substrate binding sites of proteases. More detailed comparisons are presented for serine proteases of the chymotrypsin family, for the peroxisome proliferator-activated receptor subfamily of nuclear receptors and for progesterone and androgen receptor. The results are in good accordance with structure-based analysis and highlight important differences of the binding sites, which have been also described in the literature.