A vertically integrated tool for automated design of /spl Sigma//spl Delta/ modulators

We present a tool that starting from high-level specifications of switched-capacitor (SC) /spl Sigma//spl Delta/ modulators calculates optimum specifications for their building blocks and then optimum sizes for the block schematics. At both design levels, optimization is performed using statistical techniques to enable global design and innovative heuristics for increased computer efficiency as compared with conventional statistical optimization. The tool uses an equation-based approach at the modulator level, a simulation-based approach at the cell level, and incorporates an advanced /spl Sigma//spl Delta/ behavioral simulator for monitoring and design space exploration. We include measurements taken from two silicon prototypes: (1) a 16 b @ 16 kHz output rate second-order /spl Sigma//spl Delta/ modulator; and (2) a 17 b @ 40 kHz output rate fourth-order /spl Sigma//spl Delta/ modulator. Both use SC fully differential circuits and were designed using the proposed tool and manufactured in a 1.2 /spl mu/m CMOS double-metal double-poly technology.<>     

Wastewater reclamation through a combination of natural systems (infiltration-percolation and constructed wetlands): a solution for small communities.

The decision on technologies used for reclaiming wastewater appears as important as a consequence of the implications on the economic, environmental and health conditions of societies. The problem arises when deciding how to deal with wastewater in small communities, because the costs of implementing and operating small, intensive wastewater treatment plants are unacceptable and can lead to financing and operation problems. Extensive treatment systems can be a good solution, where space is available. This paper presents the combination of two soft technologies (infiltration-percolation and constructed wetlands) to treat and reclaim wastewater. The obtained results show that the infiltration-percolation effluent presents a quality enough to be reused for irrigation of industrial crops, nurseries, fodder, cereals and oleaginous seeds, ornamental flower production; industrial cooling; impoundments, water bodies, and streams for recreational use in which the public's contact with the water is not permitted; and irrigation of forested areas, landscape areas and restricted access areas. Moreover, the combination of infiltration-percolation and constructed wetlands increases the list of final reclamation to the following: irrigation of pasture for milk or meat animals, crops for canning industry, crops not raw-consumed, fruit trees except by sprinkling, aquaculture; and aquifer recharge by localised percolation through the soil.     

Improving the testability of switched-capacitor filters

A design-for-test methodology for SC filters is presented, based on an architecture using some additional circuitry and providing extra capabilities for both off- and on-line tests. The approach uses a comparison (voting) mechanism to indicate whether or not two copies of a filter element (a biquad, for instance) have a similar response during their actual operation. The design and implementation of a few filter examples are included to assess the potential usefulness of this new approach.     

Detection of intensity changes with subpixel accuracy using laplacian-gaussian masks

We present a system that takes a gray level image as input, locates edges with subpixel accuracy, and links them into lines. Edges are detected by finding zero-crossings in the convolution of the image with Laplacian-of-Gaussian (LoG) masks. The implementation differs markedly from M.I.T.'s as we decompose our masks exactly into a sum of two separable filters instead of the usual approximation by a difference of two Gaussians (DOG). Subpixel accuracy is obtained through the use of the facet model [1]. We also note that the zero-crossings obtained from the full resolution image using a space constant ? for the Gaussian, and those obtained from the 1/n resolution image with 1/n pixel accuracy and a space constant of ?/n for the Gaussian, are very similar, but the processing times are very different. Finally, these edges are grouped into lines using the technique described in [2].     

Proposal of a uniform color scale for virgin olive oils

A new color scale was developed from a broad data set of 1700 virgin olive oil samples over four crop seasons, which can be considered highly representative of the whole color range of virgin olive oils available in Spain. This color scale provides a new set of 60 color standards, improving the results achieved by the old 60-color standards proposed by the bromthymol blue method. Seeking the greatest possibility of including a near match between colors of virgin olive oils and proposed standards, we developed our new color scale using a recent uniform color space, with standards placed in a regular rhombohedral lattice like the one employed by the Uniform Color Scales of the Optical Society of America. The average color difference between each of the 1700 virgin olive oils and its nearest standard is reduced from 8.17 CIELAB units, using the bromthymol blue standards, to 3.99 CIELAB units using the new standards. Within a color tolerance of 7.0 CIELAB units, 93.2% of our virgin olive oils can be classified with the new standards, but only 59.1% with the bromthymol blue ones. In the interest of future adoption, the performance of the new color standards should be tested by industry and researchers.     

Fracture mechanisms and failure processes at stiffener run-outs in polymer matrix composite stiffened elements

This paper describes the fractographic analyses of three stringer run-out designs which had been loaded to failure in tension. The main aims of the investigation were to deduce the failure processes in the elements, and to characterise the effect of local geometry of the stringer run-out on the failure process. The analysis showed that the critical failure mechanism in the elements was the development of +45° ply splitting at the skin surface, initially under mode I dominated intralaminar fracture. However, as these splits grew beneath the stringer foot, the mode II component increased. This led to mixed-mode delamination growth, extending parallel to the +45° ply, at the skin/adhesive interface. Subsequently, the delamination migrated through the skin via ply splits, ultimately reaching the interface between the second and third (−45°/0°) plies, in which it remained until catastrophic failure.

Extending and tapering the stringer foot led to shifting of the site of the +45° ply splitting; this was attributed to in-plane tensile stresses in the skin being inhibited in the modified designs. The reduced out-of-plane support on the stiffener foot in the modified designs led to an increase in the mode I component at the delamination from the stringer tip. It also led to an increase in the degree of multi-plane delamination growth. Based on the fractographic observations, recommendations for modelling the elements were suggested.     

A cross‐cultural comparison of colour emotion for two‐colour combinations

Psychophysical experiments were conducted in the UK, Taiwan, France, Germany, Spain, Sweden, Argentina, and Iran to assess colour emotion for two‐colour combinations using semantic scales warm/cool, heavy/light, active/passive, and like/dislike. A total of 223 observers participated, each presented with 190 colour pairs as the stimuli, shown individually on a cathode ray tube display. The results show consistent responses across cultures only for warm/cool, heavy/light, and active/passive. The like/dislike scale, however, showed some differences between the observer groups, in particular between the Argentinian responses and those obtained from the other observers. Factor analysis reveals that the Argentinian observers preferred passive colour pairs to active ones more than the other observers. In addition to the cultural difference in like/dislike, the experimental results show some effects of gender, professional background (design vs. nondesign), and age. Female observers were found to prefer colour pairs with high‐lightness or low‐chroma values more than their male counterparts. Observers with a design background liked low‐chroma colour pairs or those containing colours of similar hue more than nondesign observers. Older observers liked colour pairs with high‐lightness or high‐chroma values more than young observers did. Based on the findings, a two‐level theory of colour emotion is proposed, in which warm/cool, heavy/light, and active/passive are identified as the reactive‐level responses and like/dislike the reflective‐level response. © 2010 Wiley Periodicals, Inc. Col Res Appl, 2012     

A Nondestructive Methodology for the Study of Colored Enamels: Insights into Manufacturing and Weathering Processes

We studied ancient enamels on gilded copper from a collection of archeological horse harness pendants of the Museo Instituto Valencia de Don Juan (Madrid, Spain) to test the benefits of a new, nondestructive analytical methodology based on chemometric analysis (i.e., Principal Component Analysis, PCA) on micro‐ATR‐FTIR spectral data and chemical quantification using SEM‐EDS. The novelty of this approach was threefold: (i) PCA allowed the discrimination of the different harness pendants of known origin and attributed to the 14th and 15th centuries according to the chemical complex composition, nanostructure, glass weathering, and/or coloring mechanisms of each colored enamel, separately (i.e., red, purple, blue, and white), (ii) it is a cheap, easily available and nondestructive methodology that enables us to (iii) draw archeological conclusions about the quality of the manufacturing process, reassess the chronology of these objects and attempt to attribute them to different workshops according to the different traditional recipes identified. In particular, the enamels were made of alkali and/or alkaline earth lead‐glass with a wide range of chemical compounds in the form of pigments or opacifiers. Two types of coloring mechanisms were identified, colloidal particles such as copper‐ruby for red enamels, and ionic mechanisms such as Fe(II) and Co(II) to achieve a blue pigments; Mn(III) in the purple pigment; and two kind of white enamels were identified, i.e., tin oxide as an opacifier and uranium oxide. In addition, we established the reason for the poor state of conservation of some of the enamels by means of the identification of depolymerization and ion exchanges, well‐known harmful effects of glass weathering, and finally a chronology was assigned for some of these pieces according to the enamel composition.     

Hydrothermal synthesis (200 °C) of Co–kaolinite and Al–Co–serpentine

In the systems CoO–Al₂O₃–SiO₂–H₂O and CoO–Al₂O₃–SiO₂–HCl–H₂O, at initial pH between 5.5 and 8.1 and temperature of 200 °C, kaolinite is unstable and the following phases form through a dissolution-precipitation process: a) kaolinite and Co-bearing kaolinite; b) Al–Co–serpentine; and c) poorly crystalline phases. Identification of the several phases was carried out from a combination of X-ray diffraction and transmission/analytical electron microscopy.Co–kaolinite shows variable morphologies: a) Platy lath-shaped particles with very low Co content; b) Spherical particles, with relatively constant Co contents (in the order of 0.10 apfu); c) Kaolinite stacks with very variable Co contents (up to 0.25 apfu). Analytical data indicate that the presence of Co(OH)₂ in the system favors the dissolution process as well as serpentine formation but it leads to the parallel formation of abundant poorly crystalline phases. The Co-content in kaolinite increased as a function of the Co(OH)₂/CoCl₂ ratio in the initial systems, and it is reflected by a parallel increase of the b-cell parameter of kaolinite. The average composition of the coexisting Al–Co–serpentine is: (Al_1.20Fe_0.11Co_1.27)(Si_1.64Al_0.36)O₅(OH,Cl)₂, with Cl contents in the order of 0.14 apfu.The assemblage Co–kaolinite + Al–Co–serpentine, which appears to be stable at 200 °C, has not been described in natural environments, probably because it requires unusual Al- and Co-rich chemical systems.     

Multivalued dynamic circuits

A new family of multivalued logic circuits is presented. These circuits exhibit some appealing features: they are the first MV dynamic operators reported in the literature, they implement the Vranesic-Smith-Lee algebra (which is specially suited for arithmetic operations), and their performance has been found to be similar to binary counterparts by simulation.