To react or not to react? Intrinsic stochasticity of human control in virtual stick balancing

Understanding how humans control unstable systems is central to many research problems, with applications ranging from quiet standing to aircraft landing. Increasingly, much evidence appears in favour of event-driven control hypothesis: human operators only start actively controlling the system when the discrepancy between the current and desired system states becomes large enough. The event-driven models based on the concept of threshold can explain many features of the experimentally observed dynamics. However, much still remains unclear about the dynamics of human-controlled systems, which likely indicates that humans use more intricate control mechanisms. This paper argues that control activation in humans may be not threshold-driven, but instead intrinsically stochastic, noise-driven. Specifically, we suggest that control activation stems from stochastic interplay between the operator''s need to keep the controlled system near the goal state, on the one hand, and the tendency to postpone interrupting the system dynamics, on the other hand. We propose a model capturing this interplay and show that it matches the experimental data on human balancing of virtual overdamped stick. Our results illuminate that the noise-driven activation mechanism plays a crucial role at least in the considered task, and, hypothetically, in a broad range of human-controlled processes.     

Real-time monitoring of benzene, toluene, and p-xylene in a photoreaction chamber with a tunable mid-infrared laser and ultraviolet differential optical absorption spectroscopy

We describe the implementation of a mid-infrared laser-based trace gas sensor with a photoreaction chamber, used for reproducing chemical transformations of benzene, toluene, and p-xylene (BTX) gases that may occur in the atmosphere. The system performance was assessed in the presence of photoreaction products including aerosol particles. A mid-infrared external cavity quantum cascade laser (EC-QCL)-tunable from 9.41-9.88?μm (1012-1063?cm(-1))-was used to monitor gas phase concentrations of BTX simultaneously and in real time during chemical processing of these compounds with hydroxyl radicals in a photoreaction chamber. Results are compared to concurrent measurements using ultraviolet differential optical absorption spectroscopy (UV DOAS). The EC-QCL based system provides quantitation limits of approximately 200, 200, and 600 parts in 10(9) (ppb) for benzene, toluene, and p-xylene, respectively, which represents a significant improvement over our previous work with this laser system. Correspondingly, we observe the best agreement between the EC-QCL measurements and the UV DOAS measurements with benzene, followed by toluene, then p-xylene. Although BTX gas-detection limits are not as low for the EC-QCL system as for UV DOAS, an unidentified by-product of the photoreactions was observed with the EC-QCL, but not with the UV DOAS system.     

Feasibility of high performance in p-type Ge1−xBixTe materials for thermoelectric modules

GeTe is a promising candidate for the fabrication of high-temperature segments for p-type thermoelectric (TE) legs. The main restriction for the widespread use of this material in TE devices is high carrier concentration (up to ∼ 10²¹ cm⁻³), which causes the low Seebeck coefficient and high electronic component of thermal conductivity. In this work, the band structure diagram and phase equilibria data have been effectively used to attune the carrier concentration and to obtain the high TE performance. The Ge_1−xBi_xTe (x = 0.04) material prepared by the Spark plasma sintering (SPS) technique demonstrates a high power factor accompanied by moderate thermal conductivity. As a result, a significantly higher dimensionless TE figure of merit ZT = 2.0 has been obtained at ∼ 800 K. Moreover, we are the first to propose that application of the developed Ge_1−xBi_xTe (x = 0.04) material in the TE unicouple should be accompanied by SnTe and CoGe₂ transition layers. Only such a unique solution for the TE unicouple makes it possible to prevent the negative effects of high contact resistance and chemical diffusion between the segments at high temperatures.     

Extreme Two‐Phase Cooling from Laser‐Etched Diamond and Conformal,Template‐Fabricated Microporous Copper

This paper reports the first integration of laser‐etched polycrystalline diamond microchannels with template‐fabricated microporous copper for extreme convective boiling in a composite heat sink for power electronics and energy conversion. Diamond offers the highest thermal conductivity near room temperature, and enables aggressive heat spreading along triangular channel walls with 1:1 aspect ratio. Conformally coated porous copper with thickness 25 µm and 5 µm pore size optimizes fluid and heat transport for convective boiling within the diamond channels. Data reported here include 1280 W cm^?2 of heat removal from 0.7 cm² surface area with temperature rise beyond fluid saturation less than 21 K, corresponding to 6.3 × 10⁵ W m^?2 K^?1. This heat sink has the potential to dissipate much larger localized heat loads with small temperature nonuniformity (5 kW cm^?2 over 200 µm × 200 µm with <3 K temperature difference). A microfluidic manifold assures uniform distribution of liquid over the heat sink surface with negligible pumping power requirements (e.g., <1.4 × 10^?4 of the thermal power dissipated). This breakthrough integration of functional materials and the resulting experimental data set a very high bar for microfluidic heat removal.     

Porous silicon in solar cell structures: a review of achievements and modern directions of further use

Porous silicon, which is being obtained by electrochemical etching of silicon wafers in electrolytes on the base of hydrofluoric acid, recently attracted the attention of specialists in photovoltaics even more due to a number of its unique properties. However, at present, acceptable results are obtained for the use of porous silicon as antireflecting coating for silicon solar cells only. In the present paper, previous experience of the use of por-Si in the silicon solar cells has been reviewed. On the base of examination of the porous silicon properties, a number of new directions of improvement of photoconversion efficiency of structures with optimized layers of porous silicon are proposed. The results of numerical calculations carried confirm perspectiveness of use of porous silicon for efficiency improvement for different types of silicon solar cells. These can be increased of their internal quantum efficiency, expansions of operating spectral range toward ultra-violet and infrared spectrum range, decrease of losses of photogenerated power due to the influence of bulk and surface recombination.     

Mass-spectrometric study of coal gases

Experimental techniques and results of an investigation of the composition of coal gases by electron-impact ionization mass spectrometry (EIMS) are described. Then EIMS measurements were performed on a setup with intersecting beams, ion separation and detection by monopole mass spectrometer, and modified source of ions. The main attention is devoted to the method of determining the temperature-dependent molecular composition of gases (including methane) evolved from carbonaceous rock.     

A novel copolymer of N-[(tert-butylperoxy)methyl]acrylamide and maleic anhydride for use as a reactive surfactant in emulsion polymerization

A new copolymer of N-[(tert-butylperoxy)methyl]acrylamide (tBPMAAm), containing a primary–tertiary peroxide group and maleic anhydride (MA), was synthesized and employed as a reactive surfactant (inisurf) for the emulsion polymerization of styrene to yield surface-functionalized (peroxidized) reactive latex particles. The copolymerization characteristics were analyzed to determine the monomer reactivity ratios and to provide a way to control the copolymer composition. The ability of tBPMAAm–MA to act as a reactive surfactant during emulsion polymerization was confirmed by the synthesis of monodisperse polystyrene latexes of varying particle size. In addition, peroxide groups were localized on the surface of the particles in a controllable amount (depending on the copolymer concentration), thus, providing the opportunity for further modification of the surface of the particles. This novel copolymer is expected to be a promising and efficient material in the synthesis of functional polymer nanoparticles with well-defined core–shell morphologies.     

New Acceleration Principle of Charged Particles for Electronic Applications. Examples

The physical processes that can occur in EH-accelerators are analyzed and discussed. It is shown that on the basis of the “cooling” and acceleration effects of charged particle beams in crossed spatially-periodic transverse magnetic and vortex electric fields a number of technologically useful systems for electronic applications can be realized. The examples considered here are: high energy electron beam accelerators, relativistic quasineutral plasma beam sources, systems for simultaneous “cooling” and untwisting and formation and compression of charged particle beams, and isochronous EH-free electron lasers (EH-FELs). The theory of hierarchic oscillations and waves is used as a methodical basis of this analysis. The efficacy of practical application of the proposed earlier hierarchic algorithms is demonstrated in the process of discussions. Therein, a number of novel quantitative physical and applied results are obtained and studied.