CuxNi1-xO nanostructures and their nanocomposites with reduced graphene oxide: Synthesis,characterization, and photocatalytic applications

NiO nanostructure was synthesized using a simple co-precipitation method and was embedded on reduced graphene oxide surface via ultrasonication. Structural investigations were made through X-ray diffraction (XRD) and functional groups were confirmed by Fourier transform infrared spectroscopy (FTIR). XRD analysis revealed the grain size reduction with doping. Fourier transform infrared spectroscopy confirmed the presence of metal-oxygen bond in pristine and doped NiO nanostructure as well as the presence of carbon containing groups. Scanning electron microscopy (SEM) indicated that the particle size decreased when NiO nanostructure was doped with copper. BET surface area was found to increase almost up to 43 m²/g for Cu doped NiO nanostructure/rGO composite. Current-voltage measurements were performed using two probe method. UV–Visible spectroscopic profiles showed the blue and red shift for Cu doped NiO nanostructure and Cu doped NiO Nanostructure/rGO composite respectively. Rate constant for Cu doped NiO nanostructure/rGO composite found to increase 4.4 times than pristine NiO nanostructure.     

Knowledge-Based Virtual Modeling and Simulation of Manufacturing Processes for Industry 4.0

Abstract

Industry 4.0 aims at providing a digital representation of a production landscape, but the challenges in building, maintaining, optimizing, and evolving digital models in inter-organizational production chains have not been identified yet in a systematic manner. In this paper, various Industry 4.0 research and technical challenges are addressed, and their present scenario is discussed. Moreover, in this article, the novel concept of developing experience-based virtual models of engineering entities, process, and the factory is presented. These models of production units, processes, and procedures are accomplished by virtual engineering object (VEO), virtual engineering process (VEP), and virtual engineering factory (VEF), using the knowledge representation technique of Decisional DNA. This blend of the virtual and physical domains permits monitoring of systems and analysis of data to foresee problems before they occur, develop new opportunities, prevent downtime, and even plan for the future by using simulations. Furthermore, the proposed virtual model concept not only has the capability of Query Processing and Data Integration for Industrial Data but also real-time visualization of data stream processing.     

Process monitoring using auto-associative,feed-forward artificial neural networks

The potential of using artificially simulated neural networks as intelligent, adaptive process-monitoring devices is discussed. The investigation is considered as a method for automatic, intelligent exception reporting for quality control applications. The technique is also compared with the conventional statistical approaches of principal component analysis and Kohonen's feature map. The applications of the technique in aerospace and manufacturing environments are presented and a possible extension of the method to incorporate a diagnostic function is discussed.Seconded from Cheltenham and Gloucester College of Higher Education as a Royal Society/SERC Research Fellow at Smith's Industries Aerospace and Defence Systems, Bishop's Cleeve, Cheltenham, UK.     

Effect of Thin Film Thicknesses and Materials on the Response of RTDs and Microthermocouples

Fabrication and thermal characterization of a resistance temperature detector (RTD) heater and microthermocouples (MTs) on silicon substrates have been reported in this paper. The influence of film thickness and nickel-gold (Au) electroplating on RTD on its steady-state temperature with respect to its steady-state electrical power input and resistance is studied. Further, the thermal effects of multiple thermocouples in a thermopile as well as the effects of Au layers in the contact pads of the thermopiles on their open-circuit Seebeck voltage are studied. Therein lies the novelty of this paper. The in situ operating relationships for the RTD heater and the MT are provided     

Video compression using spatiotemporal regularity flow.

We propose a new framework in wavelet video coding to improve the compression rate by exploiting the spatiotemporal regularity of the data. A sequence of images creates a spatiotemporal volume. This volume is said to be regular along the directions in which the pixels vary the least, hence the entropy is the lowest. The wavelet decomposition of regularized data results in a fewer number of significant coefficients, thus yielding a higher compression rate. The directions of regularity of an image sequence depend on both its motion content and spatial structure. We propose the representation of these directions by a 3-D vector field, which we refer to as the spatiotemporal regularity flow (SPREF). SPREF uses splines to approximate the directions of regularity. The compactness of the spline representation results in a low storage overhead for SPREF, which is a desired property in compression applications. Once SPREF directions are known, they can be converted into actual paths along which the data is regular. Directional decomposition of the data along these paths can be further improved by using a special class of wavelet basis called the 3-D orthonormal bandelet basis. SPREF -based video compression not only removes the temporal redundancy, but it also compensates for the spatial redundancy. Our experiments on several standard video sequences demonstrate that the proposed method results in higher compression rates as compared to the standard wavelet based compression.     

A study of neutron and gamma radiation effects on transmission of various types of glasses, optical coatings, cemented optics and fiber

A study of radiation effects on various types of glasses, dielectric optical coatings, cemented optics and fiber was undertaken with a view to select them for extreme radiation environments. Samples were exposed to different radiation doses in the Pakistan Research Reactor-I (PARR-I) for neutron and Cobalt 60 source for gamma irradiation. Transmissions were measured before and after irradiation. The dielectric coatings were subjected to additional tests (adhesion, abrasion and humidity, etc.) as per MIL-M-13508C and MIL-C-675C. All 15 glasses studied showed varying amounts of transmission loss as expected, with negligible degradation for three types. Recovery of transmissions with time/ageing was also studied, with more or less complete recovery with temperature annealing. A faster bleaching of darkened/brown glasses was achieved by using UV lamps or UV laser. The dielectric coatings (HR, AR) and one of the two commercial optical cements showed excellent resistance to neutrons and gamma radiations, and could be good candidates for the fabrication and utilization of optical components in extreme radiation environments. The data allowed several Chinese glasses to be studied for the first time.     

Autoconfiguration of a dynamic nonoverlapping camera network.

In order to monitor sufficiently large areas of interest for surveillance or any event detection, we need to look beyond stationary cameras and employ an automatically configurable network of nonoverlapping cameras. These cameras need not have an overlapping field of view and should be allowed to move freely in space. Moreover, features like zooming in/out, readily available in security cameras these days, should be exploited in order to focus on any particular area of interest if needed. In this paper, a practical framework is proposed to self-calibrate dynamically moving and zooming cameras and determine their absolute and relative orientations, assuming that their relative position is known. A global linear solution is presented for self-calibrating each zooming/focusing camera in the network. After self-calibration, it is shown that only one automatically computed vanishing point and a line lying on any plane orthogonal to the vertical direction is sufficient to infer the dynamic network configuration. Our method generalizes previous work which considers restricted camera motions. Using minimal assumptions, we are able to successfully demonstrate promising results on synthetic, as well as on real data.     

A dynamic variability management approach working with agile product line engineering practices for reusing features

The Journal of Supercomputing - Agile software development (ASD) and software product line (SPL) have shown significant benefits for software engineering processes and practices. Although both...     

Security flaws in a recent RFID delegation protocol

Radio frequency identification (RFID) tag delegation enables a centralized back-end server to delegate the right to identify and authenticate a tag to specified readers. This should be used to mitigate the computational load on the server side and also to solve the issues in terms of latency and dependency on network connectivity. In this study, we describe a basic RFID delegation architecture and then under this model, we investigate the security of an RFID delegation protocol: Song Mitchell delegation (SMD), which is recently proposed by Song and Mitchell. We point out security flaws that have gone unnoticed in the design and present two attacks namely, a tag impersonation attack and a desynchronization attack against it. We also discover a subtle flaw by which a delegated entity can still keep its delegation rights after the expire of them—this infringes security policy of the scheme. More precisely, we show that the protocol will be still vulnerable to previously mentioned attacks, even if the back-end server ends the delegation right of a delegated reader and update the secrets of the delegated tags. To counteract such flaws, we improve the SMD protocol with a stateful variant so that it provides the claimed security properties.