Uncertainties in the determination of pyrrolizidine alkaloid levels in naturally contaminated honeys and comparison of results obtained by different analytical approaches

The contamination of honey with hepatotoxic pyrrolizidine alkaloids (PAs) is a well-known hazard for food safety. While management strategies and controls of the honey industry aim to reduce the PA levels, uncertainties remain with regard to the safety of regionally produced and marketed honey. In addition, a previous study showed large differences of results obtained after various periods of storage and apparent differences between the analytical results of different laboratories. Therefore, this study aimed at examining these uncertainties by monitoring the impact of storage on the PA and PA N-oxide (PANO) content of two freshly harvested honeys and on possible demixing effects caused by pollen settling. Additionally, three analytical approaches – target analysis with matrix-matched calibration or standard addition and a sum parameter method – were applied for a comparative analysis of 20 honeys harvested in summer 2016. All samples originated from Schleswig-Holstein in Northern Germany where the PA plant Jacobaea vulgaris is currently observed on a massive scale. The results of the time series analyses showed that PANO levels markedly decreased within a few weeks and practically reached the LOD 16 weeks after harvest. Tertiary PAs, by contrast, remained stable and did not increase as a consequence of PANO decrease. The experiments on a putative demixing, which may result in a heterogeneous distribution of PAs/PANOs, revealed that there was no such effect during storage of up to 12 weeks. A comparison of the PA/PANO levels obtained by different analytical approaches showed that in some cases the sum parameter method yielded much higher levels than the target approaches, whereas in other cases, the target analysis with standard addition found higher levels than the other two methods. In summary, the results of this study highlight uncertainties regarding the validity and comparability of analytical results and consequently regarding health risk assessment.     

The microscopy cell (MicCell), a versatile modular flowthrough system for cell biology, biomaterial research, and nanotechnology

We describe a novel microfluidic perfusion system for high-resolution microscopes. Its modular design allows pre-coating of the coverslip surface with reagents, biomolecules, or cells. A poly(dimethylsiloxane) (PDMS) layer is cast in a special molding station, using masters made by photolithography and dry etching of silicon or by photoresist patterning on glass or silicon. This channel system can be reused while the coverslip is exchanged between experiments. As normal fluidic connectors are used, the link to external, computer-programmable syringe pumps is standardized and various fluidic channel networks can be used in the same setup. The system can house hydrogel microvalves and microelectrodes close to the imaging area to control the influx of reaction partners. We present a range of applications, including single-molecule analysis by fluorescence correlation spectroscopy (FCS), manipulation of single molecules for nanostructuring by hydrodynamic flow fields or the action of motor proteins, generation of concentration gradients, trapping and stretching of live cells using optical fibers precisely mounted in the PDMS layer, and the integration of microelectrodes for actuation and sensing.     

Identifying the criterion spontaneously minimized during the take-off phase of a sub-maximal long jump through optimal synthesis

Optimal synthesis of human movement or the prediction of the kinematics of a new movement require not only that the multi-body system be modeled but also that a performance criterion is specified. For sub-maximal movements the selection of a suitable performance criterion, able to generate realistic dynamic behavior is difficult. A two-dimensional simulation model of the take-off phase of a sub-maximal long jump was developed to study the effect of criterion choice on the realism of simulated movements. A parametric optimization technique was employed to obtain solutions to the constrained equations of motion. Seven different criteria were evaluated, by comparing simulated movements with an actual performance, to identify the criterion which most closely approximated that spontaneously minimized by the athlete. Synthesis of the take-off phase of a sub-maximal long jump was found to be sensitive to the chosen criterion, with a criterion based on minimizing joint intersegmental forces found to perform well.     

Thermodynamic measurements in magnetically ordered solid3He

Measurements of the melting pressure and constant-volume pressure of solid³He have been made in the vicinity of the various magnetic-ordering transitions. Data have been obtained at several magnetic fields for both the low-field phase and the high-field phase, with particular attention given to the region of the polycritical point. The absence of a latent heat indicates that the transition from the paramagnetic to the high-field phase is second order or type. A spin-wave velocity of 6.95 cm/sec was obtained from theT ⁴ temperature dependence of the melting pressure in the high-field phase forB=0.495 T. These data provide the entropy and volume discontinuities as functions of field along the first-order low-field phase boundary. The volume dependence of the transition temperatures has been extracted from these and other data.     

Color object segmentation and tracking using flexible statistical model and level-set

Multimedia Tools and Applications - This study presents an unsupervised novel algorithm for color image segmentation, object detection and tracking based on unsupervised learning step followed with...     

Effect of substrate surface roughness on the adherence of NiCrAlY thermal spray coatings

The adherence of plasma sprayed NiCrAlY bond coats can be improved by an appropriate substrate surface finish. The interface fracture energy for crack propagation along the coating/substrate interface has been measured for different surface roughness by means of a specially designed four-point bending test. An increase of the interface fracture energy of about 15% was observed for a three times higher surface roughness. In addition, four-point bending tests with the coating on the side face of bending specimens were performed to analyze the fracture and spalling behavior of the coatings both under large tensile and compressive substrate deformations.     

Multi-switching adaptive synchronization of two fractional-order chaotic systems with different structure and different order

In this work, we combine the active and adaptive control theories, and propose a novel synchronization scheme for a class of fractional-order chaotic systems with different structure and different order. Based on the new version of fractional-order Lyapunov stability theory, we design the adaptive controllers and updating laws of different switching. We use the fractional-order Lorenz chaotic system and the fractional-order Chen chaotic system as examples to analyze the multi-switching synchronization process for fractional-order chaotic systems with different structures and different orders. Finally, numerical simulations are also given to illustrate the effectiveness and validation of the proposed method, and the model uncertainties and external disturbances are added to the considered systems to verify the robustness of the proposed controllers.     

Discovery of Mitophagy Inhibitors with Therapeutic Potential in Different Familial Amyotrophic Lateral Sclerosis Mutations

Mitophagy is the selective degradation of mitochondria by autophagy. It promotes the turnover of mitochondria and prevents the accumulation of dysfunctional mitochondria, which can lead to cellular degeneration. Mitophagy is known to be altered in several pathological conditions, especially in neurodegenerative diseases such as amyotrophic lateral sclerosis (ALS). We recently demonstrated an increase in autophagy flux in lymphoblasts from ALS patients bearing a mutation in SOD1. Thus, the identification of mitophagy inhibitors may be a therapeutic option to recover mitochondrial homeostasis. Here, using a phenotypic mitophagy assay, we identified a new mitophagy inhibitor, the small molecule named IGS2.7 from the MBC library. Interestingly, the treatment of different cellular and in vivo models of ALS with mutations on SOD1 and TARDBP with this inhibitor restores autophagy to control levels. These results point mitophagy inhibitors, especially IGS2.7, to a new therapeutic approach for familial ALS patients.     

Particle Size Modulates Silver Nanoparticle Toxicity during Embryogenesis of Urchins Arbacia lixula and Paracentrotus lividus

Silver nanoparticles represent a threat to biota and have been shown to cause harm through a number of mechanisms, using a wide range of bioassay endpoints. While nanoparticle concentration has been primarily considered, comparison of studies that have used differently sized nanoparticles indicate that nanoparticle diameter may be an important factor that impacts negative outcomes. In considering this, the aim of the present study was to determine if different sizes of silver nanoparticles (AgNPs; 10, 20, 40, 60 and 100 nm) give rise to similar effects during embryogenesis of Mediterranean sea urchins Arbacia lixula and Paracentrotus lividus, or if nanoparticle size is a parameter that can modulate embryotoxicity and spermiotoxicity in these species. Fertilised embryos were exposed to a range of AgNP concentrations (1–1000 µg L⁻¹) and after 48 h larvae were scored. Embryos exposed to 1 and 10 µg L⁻¹ AgNPs (for all tested sizes) showed no negative effect in both sea urchins. The smaller AgNPs (size 10 and 20 nm) caused a decrease in the percentage of normally developed A. lixula larvae at concentrations ≥50 µg L⁻¹ (EC₅₀: 49 and 75 μg L⁻¹, respectively) and at ≥100 µg L⁻¹ (EC₅₀: 67 and 91 μg L⁻¹, respectively) for P. lividus. AgNPs of 40 nm diameter was less harmful in both species ((EC₅₀: 322 and 486 μg L⁻¹, for P. lividus and A. lixula, respectively)). The largest AgNPs (60 and 100 nm) showed a dose-dependent response, with little effect at lower concentrations, while more than 50% of larvae were developmentally delayed at the highest tested concentrations of 500 and 1000 µg L⁻¹ (EC₅₀(100 nm); 662 and 529 μg L⁻¹, for P. lividus and A. lixula, respectively. While AgNPs showed no effect on the fertilisation success of treated sperm, an increase in offspring developmental defects and arrested development was observed in A. lixula larvae for 10 nm AgNPs at concentrations ≥50 μg L⁻¹, and for 20 and 40 nm AgNPs at concentrations >100 μg L⁻¹. Overall, toxicity was mostly ascribed to more rapid oxidative dissolution of smaller nanoparticles, although, in cases, Ag⁺ ion concentrations alone could not explain high toxicity, indicating a nanoparticle-size effect.     

Phenols,Flavonoids, and Antioxidant and Antibacterial Activity of Leaves and Stem Bark of Morus Species

Leaves and stem bark composition from Morus species (M. alba var. alba, M. alba var. rosa and M. rubra) was evaluated for its antioxidant and antimicrobial activities in order to enhance its therapeutic uses. Total phenolics and flavonoids contents were estimated in hydromethanolic and aqueous extracts. Results showed highest content in M. rubra leaves aqueous extract (1129 mg gallic acid equivalent/100 g dry weight and 816 mg gallic acid equivalent/100 g dry weight, respectively). Using 2,2-diphenyl-1-picrylhydrazyl assay, the highest antioxidant activity was obtained in aqueous stem barks extracts. M. alba var. alba has an IC₅₀ of 2.84 mg/ml and the IC₅₀ value of M. rubra was the highest (4.78 mg/ml). ABTS^.+ (2,2'-azinobis-(3-ethylbenzothiazoline-6-sulfonic acid)) method and reducing power assay were used to confirm the results from the 2,2-diphenyl-1-picrylhydrazyl test. All extracts expressed considerable free radical-scavenging properties. Hydromethanolic and aqueous extracts were tested against Staphylococcus aureus, Enterococcus feacalis, Staphylococcus epidermis, Escherichia coli, and Salmonella Typhimurium bacteria. Hydromethanolic stem bark extracts have the highest antimicrobial activities, and it may be a good antimicrobial agent for human gastrointestinal infections. This plant could be used as an additive to foods and also as a possible source to obtain new and effective herbal medicines to treat infections of multi-drug resistant strains of microorganisms.