Finite sample properties of estimators of spatial autoregressive models with autoregressive disturbances

The article investigates the finite sample properties of estimators for spatial autoregressive models where the disturbance terms may follow a spatial autoregressive process. In particular we investigate the finite sample behavior of the feasible generalized spatial two-stage least squares (FGS2SLS) estimator introduced by Kelejian and Prucha (1998), the maximum likelihood (ML) estimator, as well as that of several other estimators. We find that the FGS2SLS estimator is virtually as efficient as the ML estimator. This is important because the ML estimator is computationally burdensome, and may even be forbidding in large samples, while the FGS2SLS estimator remains computationally feasible in large samples. Received: 20 January 2001 / Accepted: 31 August 2001     

High-speed path-length scanning with a multiple-pass cavity delay line

Techniques for high-speed delay scanning are important for low-coherence interferometry, optical coherence tomography, pump probe measurements, and other applications. We demonstrate a novel scanning delay line using a multiple-pass cavity. Differential delays are accumulated with each pass so that millimeter delays can be generated with tens of micrometer mirror displacements. With special design criteria, misalignment sensitivity can be dramatically reduced. The system is demonstrated to scan 6 m/s at 2-kHz repetition rates. Real-time optical coherence tomography imaging with 500 pixel images at four frames/s is performed. Using a Cr:forsterite laser source, we obtained axial image resolutions of 6 microm with 92-dB sensitivity.     

A consistent modelling methodology for secondary settling tanks in wastewater treatment

The aim of this contribution is partly to build consensus on a consistent modelling methodology (CMM) of complex real processes in wastewater treatment by combining classical concepts with results from applied mathematics, and partly to apply it to the clarification-thickening process in the secondary settling tank. In the CMM, the real process should be approximated by a mathematical model (process model; ordinary or partial differential equation (ODE or PDE)), which in turn is approximated by a simulation model (numerical method) implemented on a computer. These steps have often not been carried out in a correct way. The secondary settling tank was chosen as a case since this is one of the most complex processes in a wastewater treatment plant and simulation models developed decades ago have no guarantee of satisfying fundamental mathematical and physical properties. Nevertheless, such methods are still used in commercial tools to date. This particularly becomes of interest as the state-of-the-art practice is moving towards plant-wide modelling. Then all submodels interact and errors propagate through the model and severely hamper any calibration effort and, hence, the predictive purpose of the model. The CMM is described by applying it first to a simple conversion process in the biological reactor yielding an ODE solver, and then to the solid-liquid separation in the secondary settling tank, yielding a PDE solver. Time has come to incorporate established mathematical techniques into environmental engineering, and wastewater treatment modelling in particular, and to use proven reliable and consistent simulation models.     

Behavior Measurement, Analysis, and Regime Classification in Car Following

This paper first reports a data acquisition method that the authors used in a project on modeling driver behavior for microscopic traffic simulations. An advanced instrumented vehicle was employed to collect driver-behavior data, mainly car-following and lane-changing patterns, on Swedish roads. To eliminate the measurement noise in acquired car-following patterns, the Kalman smoothing algorithm was applied to the state-space model of the physical states (acceleration, speed, and position) of both instrumented and tracked vehicles. The denoised driving patterns were used in the analysis of driver properties in the car-following stage. For further modeling of car-following behavior, we developed and implemented a consolidated fuzzy clustering algorithm to classify different car-following regimes from the preprocessed data. The algorithm considers time continuity of collected driver-behavior patterns and can be more reliably applied in the classification of continuous car-following regimes when the classical fuzzy C-means algorithm gives unclear results     

An ASM/ADM model interface for dynamic plant-wide simulation

Mathematical modelling has proven to be very useful in process design, operation and optimisation. A recent trend in WWTP modelling is to include the different subunits in so-called plant-wide models rather than focusing on parts of the entire process. One example of a typical plant-wide model is the coupling of an upstream activated sludge plant (including primary settler, and secondary clarifier) to an anaerobic digester for sludge digestion. One of the key challenges when coupling these processes has been the definition of an interface between the well accepted activated sludge model (ASM1) and anaerobic digestion model (ADM1). Current characterisation and interface models have key limitations, the most critical of which is the over-use of X_c (or lumped complex) variable as a main input to the ADM1. Over-use of X_c does not allow for variation of degradability, carbon oxidation state or nitrogen content. In addition, achieving a target influent pH through the proper definition of the ionic system can be difficult. In this paper, we define an interface and characterisation model that maps degradable components directly to carbohydrates, proteins and lipids (and their soluble analogues), as well as organic acids, rather than using X_c. While this interface has been designed for use with the Benchmark Simulation Model No. 2 (BSM2), it is widely applicable to ADM1 input characterisation in general. We have demonstrated the model both hypothetically (BSM2), and practically on a full-scale anaerobic digester treating sewage sludge.     

A 220 GHz Single-Chip Receiver MMIC With Integrated Antenna

This letter presents the design and characterization of a 220 GHz microstrip single-chip receiver monolithic microwave integrated circuit (MMIC) with an integrated antenna in a 0.1 mum GaAs metamorphic high electron mobility transistor technology. The receiver MMIC consists of a novel slot-square substrate lens feed antenna, a three-stage low noise amplifier, and a sub-harmonically pumped resistive mixer. The receiver MMIC is mounted on a 12 mm silicon substrate lens which focuses the radiation from the calibration loads to the on-chip antenna through an opening in the backside metallization of the MMIC. The double sideband noise figure of this quasioptical receiver is as low as 8.4 dB (1750 K) at 220 GHz including the losses in the antenna and in the lens. To the best of the authors' knowledge, this work demonstrates the highest integration level versus operating frequency for a MMIC ever published, regardless of technology.     

EXAFS study on the reactions between iron and fulvic acid in acid aqueous solutions

Iron(III) competes with trace metals for binding sites on organic ligands. We used X-ray absorption fine structure (EXAFS) spectroscopy to determine the binding mode and oxidation state of iron in solutions initially containing only iron(III) and fulvic acid at pHs 2 and 4. EXAFS spectra were recorded at different times after sample preparation. Iron was octahedrally configured with inner-sphere Fe-O interactions at 1.98-2.10 A, depending on the oxidation state of iron. Iron(III) formed complexes with fulvic acid within 15 min. Iron(III) was reduced to iron(II) with time at pH 2, whereas no significant reduction occurred at pH 4. No signs of dimeric/trimeric hydrolysis products were found in any of the solution samples (<0.45 microm). However, the isolated precipitate of the pH 2 sample (>0.45 microm) showed Fe...Fe distances, indicating the presence of tightly packed iron(III) trimers and/or clusters of corner-sharing octahedra. It is suggested that the binding mode of iron(III) to fulvic acid at low pH may be phase-dependent: in solution mononuclear complexes predominate, whereas in the solid phase hydrolyzed polynuclear iron(III) complexes form, even at very low pH values. The observed pH dependence of iron(III) reduction was consistent with expected results based on thermodynamic calculations for model ligands.     

Optimized capacitive active ripple compensation topology for a 3.7 kW single-phase high power density on-board charger of electric vehicles

Electrical Engineering - In this paper, a comprehensive investigation of the capacitive active ripple compensation (ARC) techniques is made to conclude which one is optimal to be used in on-board...