Optimization of Lithium Content and Sintering Aid for Maximized Li+ Conductivity and Density in Ta‐Doped Li7La3Zr2O12

Ta‐doped cubic phase Li₇La₃Zr₂O₁₂ (LLZ) lithium garnet received considerable attention in recent times as prospective electrolyte for all‐solid‐state lithium battery. Although the conductivity has been improved by stabilizing the cubic phase with the Ta⁵⁺ doping for Zr⁴⁺ in LLZ, the density of the pellet was found to be relatively poor with large amount of pores. In addition to the high Li⁺ conductivity, density is also an essential parameter for the successful application of LLZ as solid electrolyte membrane in all‐solid‐state lithium battery. Systematic investigations carried out through this work indicated that the optimal Li concentration of 6.4 (i.e., Li_6.4La₃Zr_1.4Ta_0.6O₁₂) is required to obtain phase pure, relatively dense and high Li⁺ conductive cubic phase in Li_7?xLa₃Zr_2?xTa_xO₁₂ solid solutions. Effort has been also made in this work to enhance the density and Li⁺ conductivity of Li_6.4La₃Zr_1.4Ta_0.6O₁₂ further through the Li₄SiO₄ addition. A maximized room‐temperature (33°C) total (bulk + grain boundary) Li⁺ conductivity of 3.7 × 10^?4 S/cm and maximized relative density of 94% was observed for Li_6.4La₃Zr_1.4Ta_0.6O₁₂ added with 1 wt% of Li₄SiO₄.     

Improved Superorthogonal Codes Through Generalized Rotations

Concatenation of orthogonal space-time block codes (OSTBC) with an outer trellis has led to simple and powerful codes, known as superorthogonal codes or space-time block trellis-coded modulation. In this letter, we generalize these codes by finding new code supersets and corresponding set partitioning, resulting in improved coding gain. We provide design guidelines for the labeling of the generalized code trellises and demonstrate the gains by several example designs for two and four transmit antennas     

Single-block coded modulation for MINO systems

This paper introduces a new class of space-time codes that achieve coding gain without a trellis or any form of inter-block dependency. The construction of the new codes starts from an existing (parent) space-time block code (STBC). Then by increasing the constellation size followed by expurgation of the expanded codebook, a better code is obtained at the original transmission rate. This method can be applied to a wide variety of space-time block codes, including orthogonal codes and quasi-orthogonal codes. A multi-stage design algorithm is presented, and for orthogonal parent codes, an efficient decoding algorithm is developed, and its decoding complexity is analyzed. Despite altering the regular structure of the orthogonal code, the decoding complexity is only affected by a constant factor.     

Surface topography of polylactic acid nanofibrous mats: influence on blood compatibility

Fabricating nanofibrous scaffolds with robust blood compatibility remains an unmet challenge for cardiovascular applications since anti-thrombogenic surface coatings did not withstand physiological shear force. Hence, the present study envisages the influence of smooth and porous topographies of poly(lactic acid) (PLA) nanofibers on hemocompatibility as it could offer time-independent blood compatibility. Further, recent studies have evolved to integrate various contrasting agents for augmenting the prognostic properties of tissue engineered scaffolds; an attempt was also made to synthesize Curcumin–superparamagnetic iron oxide nanoparticle complex (Cur–SPION) as a contrasting agent and impregnated into PLA nanofibers for evaluating the blood compatibility. Herein, electrospun nanofibers of PLA with different topographies (smooth and porous) were fabricated and characterized for surface morphology, zeta potential, fluorescence, and crystallinity. The scaffolds with smooth, porous and rough surface topographies were thoroughly investigated for its hemocompatibility by evaluating hemolysis percentage, platelet adhesion, in vitro kinetic clotting time, serum protein adsorption, plasma recalcification time (PRT), capture and release of erythrocytes. Although the nanofibers of all three groups showed acceptable hemolytic percentage (HP?<?5%), the adhered RBCs on Cur–SPION based fibers undergo morphological transformation from biconcave discocytes to echinocytes with cube-like protrusions. On the contrary, no morphological changes were observed in RBCs cultured on smooth and porous nanofibers. Porous fibers exhibited excellent anti-thrombogenic property and adhered lesser platelets and maintained the discoidal morphology of native platelets. Cur–SPION integrated PLA nanofibers showed inactivated platelets with anti-thrombogenic activity compared to smooth nanofibers. In conclusion, PLA nanofibers porous topography did not affect the RBC membrane integrity and maintained discoidal morphology of platelets with superior anti-thrombogenic activity. However, smooth and Cur–SPION integrated PLA nanofibers were found to activate the platelets and deform the RBC membrane integrity, respectively. Hence, the nanofibers with porous structures provide an ideal topography for time-independent hemocompatibility.

Open image in new window

     

Synthesis of alkali and acid-mediated rGO–metakaolin nano composites for supercapacitor application

Journal of Materials Science: Materials in Electronics - Two different samples of metakaolin one hardened by acid (10&nbsp;M phosphoric acid) (MP) and another by alkali (Na2SiO3 of silica...     

Spin-dependent electron transport analysis of benzyl alcohol and p-cresol based single molecular junction: a DFT-NEGF approach

Journal of Materials Science: Materials in Electronics - A single molecular junction can act as spintronic device when a molecule coupled with magnetic electrodes. Various analyses have been done...     

On-line Time Domain Vibration and Current Signals Based Multi-fault Diagnosis of Centrifugal Pumps Using Support Vector Machines

With a view to gaining an in-depth assessment of the response of particleboards (PBs) to different in-service loading conditions, samples of high-density homogeneous PBs of sugarcane bagasse and castor oil polyurethane resin were manufactured and subjected to low velocity impacts using an instrumented drop weight impact tower and four different energy levels, namely 5, 10, 20 and 30 J. The prediction of the damage modes was assessed using Comsol Multiphysics\(^\circledR .\) In particular, the random distribution of the fibres and their lengths were reproduced through a robust model. The experimentally obtained dent depths due to the impactor were compared with the ones numerically simulated showing good agreement. The post-impact damage was evaluated by a simultaneous system of image acquisitions coming from two different sensors. In particular, thermograms were recorded during the heating up and cooling down phases, while the specklegrams were gathered one at room temperature (as reference) and the remaining during the cooling down phase. On one hand, the specklegrams were processed via a new software package named Ncorr v.1.2, which is an open-source subset-based 2D digital image correlation (DIC) package that combines modern DIC algorithms proposed in the literature with additional enhancements. On the other hand, the thermographic results linked to a square pulse were compared with those coming from the laser line thermography technique that heats a line-region on the surface of the sample instead of a spot. Surprisingly, both the vibrothermography and the line scanning thermography methods coupled with a robotized system show substantial advantages in the defect detection around the impacted zone.     

Foaming of a polymer–nanoparticle system: Effect of the particle properties

This work is an experimental study of the effects of nanoparticles with different characteristics and contents on foaming composites made of three different nanosilica particles with different geometrical and chemical surface properties in a polystyrene matrix. In addition to the general characteristics reported in our last study on the morphology of polymer–nanoparticle composites, this study shows that nanosilicas of larger sizes can result in foams of higher cell densities. Additionally, the cell densities of foams can be reduced if the nanoparticle surface becomes more affine to the polymer matrix chemically. These results show a correspondence with the effects of the characteristics of the nucleation agent on the nucleation of bubbles, which have been explored previously. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Open-celled microcellular foaming and the formation of cellular structure by a theoretical pattern in polystyrene

An open-celled structure was produced using polystyrene and supercritical carbon dioxide in a novel batch process. The required processing conditions to achieve open-celled structures were predicted by a theoretical model and confirmed by the experimental data. The theoretical model predicts that at least a saturation pressure of 130 bar and a foaming time between 9 and 58 s are required for this system to produce an open-celled structure. The foaming temperature range has been selected to be higher than the polymer glass transition temperature yet not higher than a temperature limit where the gas starts leaving the system. The experimental results in the batch foaming process verified the model substantially. The SEM pictures showed the presence of pores between the cells, and the mercury porosimetry test results verified the overall open-celled structure. Experimental results also showed that by increasing the saturation pressure and the foaming temperature, there was a drop in the time required for open-celled structure formation. At saturation pressure of 130 bar, foaming temperature of 150 °C and a foaming time of 60 s, open-celled microcellular polystyrene foams were obtained using supercritical CO₂ in the batch process. Based on the results, a schematic diagram, depicting the process of foam structure formation from nucleation to bubble coalescence and gas escape from polymer, was proposed. Theoretical calculations showed that by increasing foaming time, cell size was increased and cell density was reduced and the experimental results verified this prediction.