On the role of acidity in catalytic oxidation

The role of the catalyst surface acid-base properties on the heterogeneously-catalyzed oxidation reaction mechanisms is discussed. Acid-base properties depend on the covalent/ionic character of the metal-oxygen bonds and are involved in some steps of the oxidation reactions, such as the activation of the C---H hydrocarbon bonds, the step associated with the evolution of alkoxide species and the desorption/overoxidation of the partial oxidation products. Thus they participate with the cation redox properties in determining the selective/unselective catalyst behavior.     

P16 and HPV Genotype Significance in HPV-Associated Cervical Cancer—A Large Cohort of Two Tertiary Referral Centers

The expression of p16 is a good surrogate of human papillomavirus (HPV) infection in HPV-associated cancers. The significance of p16 expression, HPV genotype and genera in the outcome of patients with HPV-associated cervical cancer (CC) is unclear. Our aim is to ascertain the prognostic significance of these factors. Data from 348 patients (median age: 47.5 years old) with CC, diagnosed in two referral centers, were retrospectively collected. Advanced disease (FIGO2018 IB2-IV) was present in 68% of patients. A single HPV genotype was identified in 82.8% of patients. The most common HPVs were HPV16 (69%) and HPV18 (14%). HPV genera reflected this distribution. HPV16 tumors presented at an earlier stage. P16 was negative in 18 cases (5.2%), 83.3% of which were squamous cell carcinomas. These cases occurred in older patients who tended to have advanced disease. In the univariate analysis, HPV16 (HR: 0.58; p = 0.0198), α-9 genera (HR: 0.37; p = 0.0106) and p16 overexpression (HR: 0.54; p = 0.032) were associated with better survival. HPV16 (HR: 0.63; p = 0.0174) and α-9 genera (HR: 0.57; p = 0.0286) were associated with less relapse. In the multivariate analysis, only the International Federation of Gynecology and Obstetrics (FIGO) stage retained an independent prognostic value. HPV16, α-9 genera and p16 overexpression were associated with better survival, although not as independent prognostic factors. Patients with p16-negative HPV-associated CC were older, presented with advanced disease and had worse prognosis.     

Methamphetamine Blocks Adenosine A2A Receptor Activation via Sigma 1 and Cannabinoid CB1 Receptors

Methamphetamine is, worldwide, one of the most consumed drugs of abuse. One important side effect is neurodegeneration leading to a decrease in life expectancy. The aim of this paper was to check whether the drug affects one of the receptors involved in neurodegeneration/neuroprotection events, namely the adenosine A_2A receptor (A_2AR). First, we noticed that methamphetamine does not affect A_2A functionality if the receptor is expressed in a heterologous system. However, A_2AR becomes sensitive to the drug upon complexes formation with the cannabinoid CB₁ receptor (CB₁R) and the sigma 1 receptor (σ₁R). Signaling via both adenosine A_2AR and cannabinoid CB₁R was affected by methamphetamine in cells co-expressing the two receptors. In striatal primary cultures, the A_2AR–CB₁R heteromer complex was detected and methamphetamine not only altered its expression but completely blocked the A_2AR- and the CB₁R-mediated activation of the mitogen activated protein kinase (MAPK) pathway. In conclusion, methamphetamine, with the participation of σ₁R, alters the expression and function of two interacting receptors, A_2AR, which is a therapeutic target for neuroprotection, and CB₁R, which is the most abundant G protein-coupled receptor (GPCR) in the brain.     

Curing of mixtures of epoxy resins and 4‐methyl‐1,3‐dioxolan‐2‐one with several initiators

Diglycidyl ether of bisphenol A or 3,4‐epoxycyclohexylmethyl 3,4‐epoxycyclohexane carboxylate were mixed with different proportions of 4‐methyl‐1,3‐dioxolan‐2‐one and cured using lanthanide triflates as initiators. In order to compare the materials obtained, conventional initiators such as boron trifluoride complexes and N,N‐dimethylaminopyridine were also tested. The curing process was followed by differential scanning calorimetry (DSC) and Fourier transform IR in attenuated total reflectance mode. This technique proved that the carbonate accelerates the curing process because it helps to form the active initiating species, although it was not chemically incorporated into the network and remained entrapped in the material. The DSC kinetic study was also reported. © 2006 Wiley Periodicals Inc. J Appl Polym Sci 102: 2086–2093, 2006     

Contribution of a disulfide bridge to the stability of 1,3-1,4-P-D-glucan 4-glucanohydrolase from Bacillus licheniformis

Bacillus 1,3-1,4-ß-glucanases possess a highly conserveddisulfide bridge connecting a ß-strand with a solventexposedloop lying on top of the extended binding site cleft The contributionof the disulfide bond and of both individual cysteines (Cys61and Cys90) in the Bacillus licheniformis enzyme to stabilityand activity has been evaluated by protein engineering methods.Reduction of the disulfide bond has no effect on kinetic parameters,has only a minor effect on the activity-temperature profileat high temperatures, and destabilizes the protein by less than0.7 kcal/mol as measured by equilibrium urea denatu ration at37°C. Replacing either of the Cys residues with Ala destabilizesthe protein and lowers the specific activity. C90A retains 70%of wild-type (wt) activity (in terms of Vmax), whereas C61Aand the double mutant C61A–C90A have 10% of wt V_max. Alarger change in free energy of unfolding is seen by equilibriumurea denaturation for the C61A mutation (loop residue, 3.2 kcal/molrelative to reduced wt) as compared with the C90A mutation (ß-strandresidue, 1.8 kcal/mol relative to reduced wt), while the doublemutant C61A–C90A is 0.8 kcal/mol less stable than thesingle C61A mutant. The effects on stability are interpretedas a result of the change in hydrophobic packing that occursupon removal of the sulfur atoms in the Cys to Ala mutations     

New thermosets obtained by cationic copolymerization of DGEBA with γ‐caprolactone with improvement in the shrinkage. II. Time–temperature–transformation (TTT) cure diagram

Mixtures of diglycidylether of bisphenol A (DGEBA) with different proportions of γ‐caprolactone (γ‐CL) were cured with ytterbium triflate as initiator. The curing was studied with differential scanning calorimetry (DSC) and thermo mechanical analysis (TMA). The results are presented in the form of a time–temperature–transformation diagram. The kinetic analysis was performed by means of the isoconversional integral procedure and the kinetic model was also determined using the Coats–Redfern method. Gelation was determined by means of combined experiences of DSC and TMA. The relationship between the glass transition temperature (T_g) and the degree of conversion α was determined by DSC. Using the isoconversional lines and the T_g‐α relationship, the vitrificacion curve was obtained. The methodology developed makes it possible to obtain the TTT diagram using only no‐isothermal experiments with equivalent results to those using classical isothermal procedures. The addition of γ‐CL accelerates the curing and reduces the shrinkage after gelation and consequently the internal stresses in the material. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007     

Toward emotional interactive videogames for children with autism spectrum disorder

Universal Access in the Information Society - Technology and videogames have been proven as motivating tools for working attention and complex communication skills, especially in children with...     

Mechanical resistance properties of gravel used in subsurface flow constructed wetlands: implications for clogging

Gravel constitutes the filter medium in subsurface flow constructed wetlands (SSF CWs) and its porosity and hydraulic conductivity decrease over time (clogging), limiting the lifespan of the systems. Using gravel of poor quality accelerates clogging in wetlands. In this study, gravel samples from six different wetland systems were compared with regards to their mineral composition and mechanical resistance properties. Results showed that both mineralogy and texture are related to mechanical resistance. Accordingly, gravel with high content of quartz (> 80%) showed a lower percentage of broken particles (0.18-1.03%) than those with lower content of quartz (2.42-4.56% media broken). Although granite is formed by high durability minerals, its non-uniform texture results in a lower resistance to abrasion (ca. 10% less resistance than calcareous gravel). Therefore, it is recommended to use gravels composed mainly of quartz or, when it is not available, limestone gravels (rounded and uniform) are recommended instead. The resistance to abrasion (LAA test) seems to be a good indicator to determine the mechanical properties of gravels used in CWs. It is recommended to use gravels with LAA below 30% in order to avoid a rapid clogging due to gravel crumbling and subsequent mineral solids accumulation.     

Distance learning for similarity estimation

In this paper, we present a general guideline to find a better distance measure for similarity estimation based on statistical analysis of distribution models and distance functions. A new set of distance measures are derived from the harmonic distance, the geometric distance, and their generalized variants according to the Maximum Likelihood theory. These measures can provide a more accurate feature model than the classical Euclidean and Manhattan distances. We also find that the feature elements are often from heterogeneous sources that may have different influence on similarity estimation. Therefore, the assumption of single isotropic distribution model is often inappropriate. To alleviate this problem, we use a boosted distance measure framework that finds multiple distance measures which fit the distribution of selected feature elements best for accurate similarity estimation. The new distance measures for similarity estimation are tested on two applications: stereo matching and motion tracking in video sequences. The performance of boosted distance measure is further evaluated on several benchmark data sets from the UCI repository and two image retrieval applications. In all the experiments, robust results are obtained based on the proposed methods.