Impact of Preferential P-Diffusion Along the Grain Boundaries on Fine-Grained Polysilicon Solar Cells

Thin-film polysilicon solar cells are a promising low-cost alternative for bulk silicon solar cells due to their reduced material thickness. Recently, we showed that the use of an amorphous silicon/polycrystalline silicon heterojunction emitter instead of a diffused homojunction emitter led to a boost in the open-circuit voltage by 90 mV. Now, we present a full evidence that shows that this improvement is related to the absence of dopant smearing along the grain boundaries. By using scanning spreading resistance microscopy, we found an enlargement of the junction area by a factor of five in case of a homojunction. The tips of the dopant spikes represent lowly doped areas with an enhanced recombination.     

Synthesis and properties of aminopropyl nucleic acids

Oligonucleotides that contain up to three aminopropyl nucleoside analogues have been synthesized. Dimers of aminopropyl adenine and thymidine were prepared and used as building blocks by applying phosphoramidite chemistry. Both R and S isomers of the aminopropyl nucleosides were used. This incorporation led to a reduction of thermal stability of double-stranded DNA. Furthermore, the (R)-adenine analogue, which yielded (S)-APNA, can be considered as a candidate for universal base pairing.     

Pore Propagation Directions in P+ Porous Silicon

A comparative study is presented on the pore propagation directions of porous silicon layers (PSL) formed on p⁺-type substrates of different orientations. PSLs were formed on plain (0 0 1) and (1 1 1) silicon wafers as well as on structured (0 0 1) wafers containing facets of various orientations. During anodization, regular pores follow the 0 0 1 direction on the (0 0 1) planes. While on the (1 1 1) planes fewer regular pores develop and seemingly propagate closely to the 1 1 1 direction. These results indicate that the pores propagate perpendicular to the surface i.e. along the field lines when the surface orientation is either (0 0 1) or (1 1 1).When the silicon surface provided (1 1 0) orientation (Chuang, Collins, and Smith, 1989), or its position is in between the (0 0 1) and (1 1 1) planes then the pores do not propagate perpendicular to the surface but along the 0 0 1 direction.All the phenomena exhibited might be explained by presuming that during formation, the pores propagate along the 1 0 0 directions, and that those 1 0 0 directions are preferred which are closely to the field lines. In PSLs formed on (0 0 1) surfaces the field lines and the 0 0 1 crystallographic direction are coincident. However, in the (1 1 1) oriented wafer where three equally probable 1 0 0 directions exist around the field lines, more irregular structure of PSLs will develop.     

A remark on the complexity of consistent conjunctive query answering under primary key violations

A natural way for capturing uncertainty in the relational data model is by allowing relations that violate their primary key. A repair of such relation is obtained by selecting a maximal number of tuples without ever selecting two tuples that agree on their primary key. Given a Boolean query q, CERTAINTY(q) is the problem that takes as input a relational database and asks whether q evaluates to true on every repair of that database. In recent years, CERTAINTY(q) has been studied primarily for conjunctive queries. Conditions have been determined under which CERTAINTY(q) is coNP-complete, first-order expressible, or not first-order expressible. A remaining open question was whether there exist conjunctive queries q without self-join such that CERTAINTY(q) is in PTIME but not first-order expressible. We answer this question affirmatively.     

Information and communication technologies in the life of university freshmen: An analysis of change

The passage from secondary school to university puts students in an environment with different expectations. Not only the expectations towards learning might change, but also towards ICT competences and computer use. The purpose of this article is to find out whether freshmen, after 6 months at the university, changed their self-perception of ICT competences and computer use in comparison with their behaviour at secondary school, and what factors can explain the self-perception of ICT competences and computer use in secondary school, in the university and their possible change. Based on a panel research among 714 freshmen of a large university, this article answers the following questions: (1) What is the self-perception of ICT competences among freshmen and is there a change in this self-perception 6 months after entering the university? (2) How often and for what purpose do freshmen use a computer and is there a change in the frequency of the use of a computer? (3) What factors might influence this attitude, behaviour, and possible change? In function of the basic components of Unified Theory of Acceptance and Use of Technology (Venkatesh, Morris, Davis, & Davis, 2003) hypotheses was developed and tested to answer these questions. Students who consider the computer to be a useful instrument, have control over the computer, possess a certain level of Internet competence, and are at ease with computers are more likely to have the skills needed to maintain a computer, to develop a web site, and to use basic ICT skills. The predictors have little influence on Internet usage. The same predictors contribute modestly to the explanation of the different frequencies of computer use, and a few of the predictors explain parts of change in ICT skills and frequency of computer use.     

Urinary aflatoxin M1 in Port-au-Prince and a rural community in north-east Haiti

Aflatoxins (AFs) are hepatocarcinogenic mycotoxins that can contaminate grains and oil seeds in tropical and sub-tropical areas and have been detected in maize and peanut products of Haiti. The first objective was to assess human exposure to AFs among Haitians at an urban hospital (GHESKIO) and a rural health centre (HCBH). The second objective was to test the association between AF exposure and reported dietary intake of potentially contaminated foods, such as maize, peanut products and milk. Measurement of urinary AFM1 by HPLC revealed that among 367 participants 14% and 22% at GHESKIO and HCBH, respectively, had detectable AFM1. The maximum and median AFM1 concentrations for all detected samples were 700 pg AFM1 ml^–1 and 11.7 pg ml^–1, respectively. Detection of AFM1 was significantly associated with peanut consumption (p < 0.05). Controlling for diet and age group in a logit model, patients who reported peanut consumption the day of the survey and patients from HCBH had greater log odds of excreting detectable AFM1 (p < 0.001 and 0.002, respectively); females had lower log odds (p = 0.020). Recalled frequency of consuming non-dairy animal-sourced foods, an indicator of diet quality, approached significance (p = 0.056) as an inverse predictor of urinary AFM1 detection. The findings augur the need for interventions that will improve food safety in Haiti and limit exposure to AFs, particularly among rural communities.     

Selective Laser Melting process optimization of Ti–Mo–TiC metal matrix composites

Selective Laser Melting (SLM) was used to process a powder mixture of CP Ti, 6.5 wt% Mo and 3.5 wt% Mo₂C. The process parameters were optimized to obtain full-density, crack free parts. After the in situ decomposition of Mo₂C in favor of the formation of TiC, the material consisted of a homogeneous dispersion of submicrometer sized TiC platelets in a β-(Ti,Mo) matrix exhibiting a high hardness up to 550 HV and compressive yield stress of 1164 ± 37 MPa. The microstructure and mechanical properties could be tailored by variation of the process parameters within the high-density processing window, as well as through post-process heat treatments.     

Impact of the Cd2+ treatment on the electrical properties of Cu2ZnSnSe4 and Cu(In,Ga)Se2 solar cells

The present contribution aims at determining the impact of modifying the properties of the absorber/buffer layer interface on the electrical performance of Cu₂ZnSnSe₄ (CZTSe) thin‐film solar cells, by using a Cd²⁺ partial electrolyte (Cd PE) treatment of the absorber before the buffer layer deposition. In this work, CZTSe/CdS solar cells with and without Cd PE treatment were compared with their respective Cu(In,Ga)Se₂ (CIGSe)/CdS references. The Cd PE treatment was performed in a chemical bath for 7 min at 70 °C using a basic solution of cadmium acetate. X‐ray photoemission spectroscopy measurements have revealed the presence of Cd at the absorber surface after the treatment. The solar cells were characterized using current density–voltage (J–V), external quantum efficiency, and drive‐level capacitance profiling measurements. For the CZTSe‐based devices, the fill factor increased from 57.7% to 64.0% when using the Cd PE treatment, leading to the improvement of the efficiency (η) from 8.3% to 9.0% for the best solar cells. Similar observations were made on the CIGSe solar cell reference. This effect comes from a considerable reduction of the series resistance (R_S) of the dark and light J–V, as determined using the one‐diode model. The crossover effect between dark and light J–V curves is also significantly reduced by Cd PE treatment. Copyright © 2015 John Wiley & Sons, Ltd.     

Identification of quasi-optimal regions in the design space using surrogate modeling

The use of Surrogate Based Optimization (SBO) is widely spread in engineering design to find optimal performance characteristics of expensive simulations (forward analysis: from input to optimal output). However, often the practitioner knows a priori the desired performance and is interested in finding the associated input parameters (reverse analysis: from desired output to input). A popular method to solve such reverse (inverse) problems is to minimize the error between the simulated performance and the desired goal. However, there might be multiple quasi-optimal solutions to the problem. In this paper, the authors propose a novel method to efficiently solve inverse problems and to sample Quasi-Optimal Regions (QORs) in the input (design) space more densely. The development of this technique, based on the probability of improvement criterion and kriging models, is driven by a real-life problem from bio-mechanics, i.e., determining the elasticity of the (rabbit) tympanic membrane, a membrane that converts acoustic sound wave into vibrations of the middle ear ossicular bones.