下T6-361井多井防碰绕障技术

下T6—361井是一口双靶定向井，由于受地面和地质条件的限制，必须穿越9口井，其中最近的4口井防碰距仅为13—32m，钻井施工难度大，是一口较典型的多井防碰绕障定向井。在优化井身剖面设计、优选钻具组合、采用导向钻井技术的基础上，采取了一系列安全钻进措施，顺利钻至设计井深。对该井的地质工程设计、井眼轨迹控制及防碰绕障技术等进行了介绍，对同类型井的施工有一定的借鉴。     

微波法制取二氧化锡粉体材料

以SnCl_2·2H_2O为主要原料,用微波加热法制备SnO_2粉体。用粒度仪对制备的粉体进行了表征。结果表明:微波加热可使原料反应生成粉体颗粒,其反应物浓度、pH值、微波加热功率及反应时间都对粒径产生影响。在反应功率为400W;pH值为2～3;反应时间为20min;反应浓度为0.35×10~(-2)mol/L时,可以制备出SnO_2粉体。     

A new algorithm for improving the accuracy of periodic signalanalysis

Digital periodic signal analysis often requires synchronized sampling with the signal being analyzed. In certain practical situations, however, this condition is difficult to satisfy. As a result, a number of undesirable effect such as the spectral leakage associated with the discrete Fourier transform (DFT), and the truncation errors in digital wattmeters arise and degrade system performance. This paper presents a new approach which attempts to remedy the underlying problem. The basic idea of the proposed method is to modify the actual sampled sequence such that it becomes an ideal sample sequence which is synchronized with the signal subjected to sampling. A simple algorithm for modifying the sampled sequence on-line is derived based on interpolation. The proposed approach requires quite modest additional computational burden which makes it suitable for real-time signal professing. To illustrate the practical applicability of the proposed algorithm, the paper considers two distinct but common cases. First, it shows how the proposed method can be used in the case of DFT analysis of harmonic signals, and secondly, it considers the digital wattmeter application area in electrical power-system measurement. Results show that the proposed algorithm is capable of reducing both the leakage effect in DFT analysis and truncation errors in digital wattmeters     

The Hardness of the Closest Vector Problem With Preprocessing Over$ell_infty$Norm

We show that the closest vector problem with preprocessing (CVPP) over lscr _infin norm (CVPP_infin) is NP-hard. The result is obtained by the reduction from the subset sum problem with preprocessing to CVPP_infin. The reduction also shows the NP-hardness of CVP_infin, which is much simpler than all previously known proofs. In addition, we also give a direct reduction from exact 3-sets cover problem to CVPP_infin     

25MVA矿热炉炉眼烧损原因及开堵眼机的开发使用

对炉眼烧损原因进行了分析，矿热炉通过使用开堵眼机，减少了炉眼烧损，解决了跑眼频繁、出铁口使用寿命短的问题，并取得了一定的经济效益。     

Influential facilities placement over moving objects

Distributed and Parallel Databases - In this paper we propose and study the problem of k-Collective influential facility placement over moving object. Specifically, given a set of candidate...     

电力物联网D2D通信中模式预选的多播重传技术

针对电力物联网D2 D通信中的模式预选问题,提出多播重传机制.首先,通过分析D2 D传输的集中式和分布式2种重传方案的优势和不足,提出一种新的基于重传模式预选的D2 D多播重传方案.新方案通过簇头汇总D2 D多播ACK状态和簇内链路质量,避免了集中式方案中上行汇报信令开销太大的问题;同时,通过让簇头来决定重传方案后再上报基站的方式,避免了分布式重传方案中预留资源带来的资源浪费问题.簇头充分考虑D2 D链路差异,根据D2 D链路质量自适应地选择最优传输节点,可充分利用D2 D链路的多信道分集增益.理论分析和计算机仿真验证方案在信令开销和传输效率方面的有效性.     

镁合金与钛合金的瞬间液相扩散焊

为实现镁合金AZ31B与钛合金Ti6A14V的可靠连接，研究了两者以Al为中间层的瞬间液相扩散焊接头的微观结构与连接强度。研究结果表明：当焊接时间为180min时，焊接温度是影响界面反应热力学与动力学的主要参数，其对接头的微观组织、接头界面新生相构成与连接强度有重要影响。保温温度低于450℃时，AZ3IB／AI界面无液相产生，无法实现AZ31B与Ti6A14V的可靠连接；保温温度在450℃～480℃变化时，温度对AZ31B／Al／Ti6A14V界面反应的动力学因素有明显影响，且直接决定了焊后接头新生相的构成与分布。470℃保温180min的接头剪切强度较高（72．4MPa），达到AZ31B母材（86MPa）的84．2％。     

Friction welding of TiAl intermetallics and structural steel by applying Inconel 718 as interlayer

0IntroductionInterlayer metal is usually introduced while solidwelding heterogeneous metals with different chemical com-ponents and microstructures[1-3].The diffusion activationenergy(DAE)in both sides of interlayer and base metalcould be affected by the …