Viscoplastic behavior of AA7075 aluminum alloy at high strain rate

Journal of Mechanical Science and Technology - The flow stress increases with the increase in strain rate. This phenomenon is the strain rate effect of plastic deformation. Hopkinson experiment...     

基于空气质量模拟的江苏省大气污染物排放清单比较研究

大气污染物排放清单是空气质量模拟和空气污染治理的重要依据.本研究比较分析了两套覆盖江苏省的2017年大气污染物排放清单，即分别由上海市环境科学研究院、江苏省环境科学研究院编制的"长三角清单"和"江苏省清单"，并结合区域空气质量模型CMAQ评估不同清单对长三角地区2017年1、4、7、10月的空气质量模拟的影响.清单比较结果表明，除二氧化硫（SO₂）以外，江苏省清单估算的各污染物排放量较长三角清单低.通过与观测数据比较，发现两套清单对SO₂、氮氧化物（NO_x）、臭氧（O₃）和细颗粒物（PM_2.5）的模型模拟性能均较好.江苏省清单与长三角清单两者的模拟结果空间分布接近，其中江苏省清单模拟的PM_2.5和O₃在长三角多数地区略低于长三角清单的模拟结果（1月O₃除外）.江苏省清单与长三角清单均能够用于空气质量模式模拟，可为江苏地区的细颗粒物和光化学烟雾污染的控制策略制定提供参考.     

Technical and economic analysis of solvent-based lithium-ion electrode drying with water and NMP

Processing lithium-ion battery (LIB) electrode dispersions with water as the solvent during primary drying offers many advantages over N-methylpyrrolidone (NMP). An in-depth analysis of the comparative drying costs of LIB electrodes is discussed for both NMP- and water-based dispersion processing in terms of battery pack $/kWh. Electrode coating manufacturing and capital equipment cost savings are compared for water vs. conventional NMP organic solvent processing. A major finding of this work is that the total electrode manufacturing costs, whether water- or NMP-based, contribute about 8–9% of the total pack cost. However, it was found that up to a 2?×?reduction in electrode processing (drying and solvent recovery) cost can be expected along with a $3–6?M savings in associated plant capital equipment (for a plant producing 100,000 10-kWh Plug-in Hybrid Electric Vehicle (PHEV) batteries) using water as the electrode solvent. This paper shows a different perspective in that the most important benefits of aqueous electrode processing actually revolve around capital equipment savings and environmental stewardship and not processing cost savings.     

循环伏安法在润滑油检测中的应用

介绍了循环伏安法的产生背景、原理。应用该技术可以快速、方便地对润滑油中抗氧剂、总酸（碱）值进行测定，并且可以对不同厂家润滑油的抗氧剂包进行区别。该技术还可以有效地评价润滑油的使用寿命和设备工作状况。     

Solving the small sample size problem in face recognition using generalized discriminant analysis

The goal of face recognition is to distinguish persons via their facial images. Each person's images form a cluster, and a new image is recognized by assigning it to the correct cluster. Since the images are very high-dimensional, it is necessary to reduce their dimension. Linear discriminant analysis (LDA) has been shown to be effective at dimension reduction while preserving the cluster structure of the data. It is classically defined as an optimization problem involving covariance matrices that represent the scatter within and between clusters. The requirement that one of these matrices be nonsingular restricts its application to datasets in which the dimension of the data does not exceed the sample size. For face recognition, however, the dimension typically exceeds the number of images in the database, resulting in what is referred to as the small sample size problem. Recently, the applicability of LDA has been extended by using the generalized singular value decomposition (GSVD) to circumvent the nonsingularity requirement, thus making LDA directly applicable to face recognition data. Our experiments confirm that LDA/GSVD solves the small sample size problem very effectively as compared with other current methods.     

夏热冬暖地区住宅平面设计与空调能耗关系分析

夏季住宅空调能耗已成为目前广州地区电力过荷的一个主要原因，而目前建筑师对住宅设计中的空调能耗因素并未有深入的考虑。本文就广州地区中高层住宅标准层平面设计中的朝向、形状、大小及层高与空调能耗关系进行了相关的分析，适用于夏热冬暖地区。     

大变量逻辑函数最佳覆盖问题研究

逻辑函数的最佳覆盖，一直是逻辑综合领域的关键环节。尤其是大变量逻辑函数最佳覆盖，对复杂的逻辑综合更为重要，但也更加困难。本文在对逻辑覆盖算法研究的基础上，提出了适合大变量逻辑函数最佳覆盖的Beister改进算法。经过大量算题的测试表明，改进的列覆盖算法在时间复杂度和选择效果方面均优于Beister算法。     

可重复高压灌浆土层锚杆

论述了可重复高压灌浆锚杆的结构构造以及其独特的灌浆工艺，探讨了该类锚杆的承载能力特性。文中还给出了该类锚杆在不同地层中应用的几个实例。     

Investigation of the Microstructure of Rolled Semi—Solid Steel

In this paper,spring steel-60Si2Mn and stainless steel-1Cr18Ni9Ti were rolled one pass in semi-solid state.The microstructural evolution during rolling of the steels with different solid fraction was investigated.The experimental results showed that the manner of liquid and solid phases flowing and deforming was different.During rolling,most of solid phases remained in the center of the rolled specimens,while liquid phase flowed to the edge,which resulted in the macrosegregation of liquid and solid phases.Only the amount of solid fraction reached a certain value,were the solid phases deformed and flattened.     

半精纺纱线生产工艺特点

介绍了半精纺技术的概念、生产工艺流程以及加工技术要点。