用响应面法进行压缩机环状管*的设计优化

从结构振动和结构噪声的角度来看，压缩机的环状管是电冰箱中最重要的部件。压缩机内部机体产生的振动能量通过环状管传到壳体和外界，因此压缩机环状管的设计非常重要。但是，由于环状管几何形状的复杂性和运动的非线性，分析和设计环状管十分困难，往往不得不用统计法和试验法进行系统设计。对于类似环状管这样的复杂系统，响应面法(RSM)是常用的建模技术。用有限元模型和简单的试验模型代替环状管的实际模型作为环状管优化的起点。建立RS模型以后，用Sensitivity-based优化法进行优化。采用动态最小二乘法(MLSM)减少逼近误差。     

Investigation of organic n-type field-effect transistor performance on the polymeric gate dielectrics

We report a copper hexadecafluorophthalocyanine (F₁₆CuPc) based n-type organic field-effect transistor (OFET) with polymeric gate dielectrics with different physical/electrical properties. The gate dielectrics are four types of cross-linked poly(4-vinylphenol) and newly prepared poly(4-phenoxy methyl styrene) and those are characterized based on surface tension, leakage current and capacitance. The performance of F₁₆CuPc OFETs with those gate dielectrics was compared. We found that the composition of the gate dielectrics and the interfacial interaction of F₁₆CuPc with the gate dielectric play a decisive role in the performance of OFETs. The effect of physical/electrical properties, composition and processing condition of the gate dielectrics on the device performance was investigated.     

Effect of H2O evolving from TEOS based SiO2 film on the EEPROM cell characteristic

In this paper, we investigate the effect of water (H₂O) molecules evolving from silicon dioxide (SiO₂) film deposited by low pressure chemical vapor deposition (LPCVD) at 670 °C on the transistor characteristic of an electrically erasable programmable read only memory (EEPROM) cell. Fourier Transform Infra red (FT-IR) analysis reveals that H₂O is captured during film deposition and diffused to silicon surface during high thermal processing. The diffused H₂O molecules lower threshold voltage (V_t) of cell transistor and, thus, leakage current of the cell transistor is increased. In erased cell, V_t lowering is 0.25 V in which it increases leakage current of cell transistor from 1 to 100 pA. This results in the lowering of high voltage margin of a 512 Kb EEPROM from 2.8 to 2.6 V at 85 °C.     

Development of a risk assessment program for chemical terrorism

The study focuses on assessing the security risk of the terrorism in the chemical industry. This research modifies conventional risk assessment methods for including terrorism and sabotage scenarios. The objective of this risk assessment is to identify security hazards, threats and vulnerabilities facing each target facility, and to find the adequate countermeasures to protect the public, workers, national interest, environment, and companies. This study results in implementing software to analyze the possibility of terrorism and sabotage. This program includes five steps: asset characterization, threat assessment, vulnerability analysis, risk assessment and new countermeasures. It is a systematic, risk-based approach in which risk is a function of the severity of consequences of an undesired event, the likelihood of adversary attack, and the likelihood of adversary success in causing the undesired event. The reliability of this method is verified by the dock zone case. This study suggests an effective approach to chemical terrorism response management.     

Active structural acoustic control for radiated sound power reduction of enclosure with vent holes based on radiation modes

Journal of Mechanical Science and Technology - The radiated sound power in an enclosure with a vent hole is actively controlled by radiation mode. Active structural acoustic control (ASAC), which...     

Highly sensitive hydrogen detection of catalyst-free ZnO nanorod networks suspended by lithography-assisted growth

We have successfully demonstrated a ZnO nanorod-based 3D nanostructure to show a high sensitivity and very fast response/recovery to hydrogen gas. ZnO nanorods have been synthesized selectively over the pre-defined area at relatively low temperature using a simple self-catalytic solution process assisted by a lithographic method. The conductance of the ZnO nanorod device varies significantly as the concentration of the hydrogen is changed without any additive metal catalyst, revealing a high sensitivity to hydrogen gas. Its superior performance can be explained by the porous structure of its three-dimensional network and the enhanced surface reaction of the hydrogen molecules with the oxygen defects resulting from a high surface-to-volume ratio. It was found that the change of conductance follows a power law depending on the hydrogen concentration. A Langmuir isotherm following an ideal power law and a cross-over behavior of the activation energy with respect to hydrogen concentration were observed. This is a very novel and intriguing phenomenon on nanostructured materials, which suggests competitive surface reactions in ZnO nanorod gas sensors.     

Transmission of block turbo coded digital audio over FM-SCA

In this paper, an efficient coded scheme for transmitting digital audio over the existing FM channel, by multiplexing it with the baseband FM signal, is described. Transmission of multiplexed signals in the FM baseband called FM-SCA (subsidiary communications authorization) has been previously used for low quality analog content and some low rate digital content. The investigated scheme opens up the possibility of achieving CD quality audio over FM-SCA by enabling high bitrate transmission using MPEG-I layer 3 and MPEG-AAC audio coding for the digital audio. These schemes provide CD quality audio at or below 128 kbps, MPEG-AAC being able to do so at rates as low as 96 kbps. Block turbo codes (BTC), which offer near Shannon's limit performance with relatively low hardware complexity requirements, provide the error protection. Block turbo codes have been shown to be particularly effective for high coding rates. The system uses OFDM in conjunction with 8PSK/16PSK to modulate the digital bitstream and fit it in the 44 kHz (54 to 98 kHz) band available in the FM baseband. Simulation results show an optimal system configuration for digital audio transmission in FM-SCA.