Imaging of two-dimensional unsaturated moisture flows in uncracked and cracked cement-based materials using electrical capacitance tomography

The development of visualizing tools to monitor unsaturated moisture flow in cement-based materials is of great importance, as most degradation processes in cement-based materials are connected to and take place in the presence moisture. This paper investigates the ability of electrical capacitance tomography (ECT) to image two-dimensional (2D) unsaturated moisture flow in cement-based materials. In ECT, the electrical permittivity distribution within an object is reconstructed based on measured capacitances between electrodes attached on the object’s surface. In a series of experiments, mortar specimens with and without discrete cracks were imaged with ECT during a 2D moisture ingress. The results show that ECT is able to monitor the evolution of the moisture flow, and to approximate the shape and position of the moisture front. These findings indicate that ECT is a viable method for monitoring and visualizing 2D unsaturated moisture flow in cement-based materials in the presence and absence of discrete cracks.     

Bacterial attachment to oropharyngeal epithelial cells in breastfed newborns

Dopaminergic agents and carbidopa/levodopa have become the preferred treatment for both the restless legs (RL) syndrome and for periodic limb movements in sleep (PLMS). For once-nightly treatments with carbidopa/ levodopa, a problem with morning end-of-dose rebound increases in leg movements has been reported to occur in the about one-fourth of the patients. In our clinical studies a previously unreported but far more significant problem of markedly augmented RL symptoms occurred in the afternoon and the evening prior to taking the next nightly dose. A systematic prospective evaluation of this augmentation in 46 consecutive patients treated with carbidopa/ levodopa for RL syndrome or PLMS disorder found this augmentation to be the major adverse effect of treatment. Augmentation occurred for 31% of PLMS patients and 82% of all RL patients. It was greater for subjects with more severe RL symptoms and for patients on higher doses (> or = 50/200 mg carbidopa/levodopa) but was unrelated to gender, age or baseline severity of PLMS. This augmentation was severe enough to require medication change for 50% of the RL patients and 13% of PLMS patients. Augmentation resolved with cessation of the medication and could be minimized by keeping the dose low.     

Porphyromonas-like gram-negative rods in naturally occurring periodontitis in dogs

A total of 259 Gram-negative Porphyromonas-like rods isolated from subgingival plaque samples of 16 family-owned dogs with naturally occurring periodontitis were characterized phenotypically by biochemical reactions, metabolic end products and enzymatic activities (API-ZYMTM, RoscoTM). Four distinct groups were found. Group A isolates (63) were asaccharolytic, lipase negative, trypsin positive and produced phenylacetic acid (PAA) from peptone-yeast extract glucose broth. Unlike P. gingivalis strains they were catalase positive. Group B isolates (42) differed from those of group A by a positive lipase reaction and from those of group D by failing to ferment sugars. Group C isolates (88) were asaccharolytic and did not produce PAA. They were alpha-fucosidase, N-acetyl-beta-glucosaminidase (beta-NAG) and trypsin negative, resembling P. endodontalis, but unlike human isolates, they were catalase positive. Subgroup C.1 isolates (6) differed from those of parent group C by producing minor amounts of PAA, and subgroup C.2 isolates (12) were beta-NAG positive. Group D isolates (46) were weakly fermentative, lipase, catalase and trypsin positive, and produced PAA. They resembled the B (P.) salivosus type strain which, in our hands, fermented weakly glucose, lactose and mannose. Two isolates could not be assigned to any of the previous groups.     

Modelling spatio-temporal environmental data

A conceptual model for environmental data is presented with special emphasis on the ability to store spatio-temporal references of the data. Other aspects of the model are the ability to handle hierarchical data and semantics of the measurements. The model was tested with an implementation on an object-relational database management system. As a part of the test implementation, a forestry data set covering 75 years and 4900 hectares was loaded onto the database.     

Advanced flaw production method for in-service inspection qualification mock-ups

One of the key issues in in-service inspection qualification is the representativeness of the defects used in qualification specimens. The best representativeness is achieved with realistic defects. However, present specimen production techniques have some significant weaknesses, such as unrealistic defects or additional alterations induced in the surrounding material. Specimens manufactured, for example, by weld implantation or with weld solidification defects always result in one or more extra weld interfaces. These interfaces can be detected by NDT. To overcome problems with the current specimens, a new defect manufacturing technique was developed. The new technique produces natural, representative defects without introducing additional weld metal or other unwanted alterations to the specimen.The new method enables artificial production of single, separate fatigue cracks by thermal loading. The method is based on a natural thermal fatigue damage mechanism and enables production of real cracks directly into the samples. Cracks are produced without welding or machining and without any preliminary surface treatment or artificial initiator such as a notch or a precrack. Single crack or a network of cracks can be induced into the base material, welded areas, HAZ, weld claddings, threaded areas, T-joints, etc. The location, orientation and size of produced cracks can be accurately controlled. Produced cracks can be used to simulate different types of service-induced cracks such as thermal fatigue, mechanical fatigue and stress corrosion cracks. It is shown that artificially produced thermal fatigue cracks correspond well with the real, service-induced cracks and overcome the problems of traditional qualification specimen manufacturing techniques.     

Accurate detection of coronary artery disease by integrated analysis of the ST-segment depression/heart rate patterns during the exercise and recovery phases of the exercise electrocardiography test

In this comparative cross-sectional study, we evaluated whether a novel computerized diagnostic variable, ST-segment depression/heart rate ST/HR analysis during both the exercise and postexercise recovery phases of the exercise electrocardiography (ECG) test, can detect coronary artery disease more accurately than methods using either exercise or recovery phase alone. The study population comprised 347 clinical patients referred for a routine bicycle exercise ECG test at Tampere University Hospital, Finland. Of these, 127 had angiographically proven coronary artery disease, whereas 13 had no coronary artery disease according to angiography, 18 had no perfusion defect according to technetium-99m sestamibi single-photon emission computed tomography, and 189 were clinically normal with respect to cardiac diseases. For each patient, the maximum values of the ST/HR hysteresis, ST/HR index, end-exercise ST depression, and recovery ST depression were determined from the Mason-Likar modification of the standard 12-lead exercise electrocardiogram [aVL, aVR, and V1 excluded]. The diagnostic performance of these continuous diagnostic variables was compared by means of receiver-operating characteristic analysis. The area under the receiver-operating characteristic curve of the ST/HR hysteresis was 89%, which was significantly larger than that of the end-exercise ST depression (76%, p < or = 0.0001), recovery ST depression (84%, p = 0.0063), or ST/HR index (83%, p = 0.0023), indicating superior diagnostic performance of the ST/HR hysteresis independent of the partition value selection. In conclusion, computerized analysis of the HR-adjusted ST depression pattern during the exercise phase, integrated with the HR-adjusted ST depression pattern during the recovery phase after exercise, can significantly improve the diagnostic performance and clinical utility of the exercise ECG test for the detection of coronary artery disease.     

Analysis of lipid classes by solid-phase extraction and high-performance size-exclusion chromatography

An improved method to analyze lipid classes of edible oils and fats by solid-phase extraction (SPE) and high-performance size-exclusion chromatography (HPSEC) is presented. A mixture of lipid standards was fractionated by the solid-phase extraction procedure (NH₂ phase) into polar and nonpolar fractions; these were then submitted to analysis by HPSEC. The size-exclusion chromatographic columns were three styrene/divinylbenzene columns with pore sizes of 100 Å and 50 Å. Light-scattering was used for the detection system, and the parameters of the detector were optimized to minimize the difference between the responses of the compounds studied. With this procedure it was possible to separate the following lipid classes: triacylglycerols, diacylglycerols, monoacylglycerols and free fatty acids, sterols, sterol esters, tocopherols and carotenoids. Quantitative analysis was studied for a light-scattering detector with several lipid standards of different molecular weights and unsaturation levels.