A hardware-based algorithm for virtual machine provisioning in a private cloud

Cloud computing is becoming a key factor in the market day by day. Therefore, many companies are investing or going to invest in this sector for development of large data centers. These data centers not only consume more energy but also produce greenhouse gases. Because of large amount of power consumption, data center providers go for different types of power generator to increase the profit margin which indirectly affects the environment. Several studies are carried out to reduce the power consumption of a data center. One of the techniques to reduce power consumption is virtualization. After several studies, it is stated that hardware plays a very important role. As the load increases, the power consumption of the CPU is also increased. Therefore, by extending the study of virtualization to reduce the power consumption, a hardware-based algorithm for virtual machine provisioning in a private cloud can significantly improve the performance by considering hardware as one of the important factors.     

PalmPhasor算法性能的理论分析

模板的安全性和隐私性是掌纹系统实际应用的关键问题,然而生物特征保护的多项指标通常相互冲突并且难以同时满足.作为解决上述冲突的一种可撤销掌纹编码算法,PalmPhasor实现了高效、安全的掌纹认证.建立了系统分析PalmPhasor性能的完整框架.为了便于具体分析,将情景分为4种情况,并且提供了支持相应分析的预备知识,包括辅助定理以及Gabor滤波掌纹图像实部和虚部分布特性.在统计学基础上建立的理论分析和实验结果均表明:即使在用户口令被盗的情况下,多方向分数级融合增强的PalmPhasor算法也可以同时有效地满足可撤销生物特征的4项指标.     

公交车辆用可燃气体检测仪

以可编程门阵列器件FPGA和气体传感器MQ-3为核心,设计了能检测可燃物挥发气的车载式检测仪.为了保证灵敏度,采用了差动集气管结构;为了免人工维护,采用了气泵正、反转集气、吹扫双功能;所有部件小巧,适合安装在车门附近的狭小空间内.最后对差动集气管效果、敏感探测距离进行了实验.     

A weight function-critical plane approach for low-cycle fatigue under variable amplitude multiaxial loading

Low‐cycle fatigue data of type 304 stainless steel obtained under axial‐torsional loading of variable amplitudes are analyzed using four multiaxial fatigue parameters: SWT, KBM, FS and LKN. Rainflow cycle counting and Morrow's plastic work interaction rule are used to calculate fatigue damage. The performance of a fatigue model is dependent on the fatigue parameter, the critical plane and the damage accumulation rule employed in the model. The conservatism and non‐conservatism of predicted lives are examined for some combinations of these variables. A new critical plane called the weight function‐critical plane is introduced for variable amplitude loading. This approach is found to improve the KBM‐based life predictions.     

Preparation of patterned SiC and SiCN microstructures

With the development of modern science and technology, the importance of small structures or microstructures (such as the fluidic nanostructure or microreactor[1], the in- tegrate circuit in microelectronics[2], the factory in a chip[3,4], etc.) has been incarnated day by day in the fields of microelectronics, micro-optical systems, microanalytical sys- tems, microelectromechanical systems and cytobiology. And the fabrication technique (microfabrication) of the small structures has become the h…     

大型汽轮发电机主绝缘耐压和电老化试验中定子线棒端部防晕技术的研究

大型汽轮发电机在主绝缘耐压和电老化试验中,可能出现定子线棒端部闪络和防晕层过热的情况,从而损伤主绝缘,影响试验顺利进行。本文通过建立真机线棒端部的Pspice仿真模型,模拟了线棒端部绝缘表面电场分布,分析了端部闪络的原因。通过进一步的仿真研究,提出了线棒端部防晕的技术方案,并试制了线棒端部防晕装置。试验结果表明,该防晕装置可有效防止线棒端部闪络和防晕层过热。     

有限元法与田口方法相结合模拟研究交联聚乙烯电缆绝缘中的水树现象

聚合物中水树的引发与生长不仅与多个内部、外部参数有直接的关系,还与这些参数之间的协同作用有关。在研究水树生长的过程中,采用统计方法是非常必要的,这些统计方法首先要包括可靠的重要变量,还要能够对大量的试验结果进行合理的解释。运用田口方法和有限元法相结合的模拟方法可以在短时间内找到诱发水树的原因,还可以表征水树的危险性并采取适当的方法加以抑制其生长。数值分析及水树培养试验结果显示,水树内部的介电常数及介电常数分布是影响水树诱发的主要原因,而水树本身的几何尺寸的作用则相对次要。     

γ辐照交联聚乙烯绝缘电缆水树行为的研究

核电站的控制系统等需要大量的电线电缆,这些电缆的耐辐射性能至关重要。高能辐射对固态聚合物有多种作用,包括引发交联以及链裂解等。水树是影响交联聚乙烯电缆,特别是中低压电缆使用寿命的重要因素。本文研究了γ辐射对交联聚乙烯电缆绝缘水树行为的影响。结果显示,在0~3000 kGy辐照剂量之内,水树的长度与密度随着辐照剂量的增加而增加。