Development of LTCC micro-hotplate with PTC temperature sensor for gas-sensing applications

Low temperature co-fired ceramic (LTCC) micro-hotplates show wide applications in gas sensors and micro-fluidic devices. It is easily structured in three-dimensional structures. This paper presents the low power consumption micro-hotplates which were developed with PTC (positive temperature coefficient) temperature sensor and inter-digitated electrodes. The paper presents two different structures for micro-hotplate with platinum as a heating element. The PTC temperature sensor using two different materials viz. PdAg and platinum paste are developed with micro-hotplates. The simulation has been achieved through COMSOL for LTCC and alumina micro-hotplates. The temperature variation with power consumption has been measured for the developed LTCC micro-hotplates. The change in resistance of PTC temperature sensors was measured with micro-hotplate temperature. The aim of this study was to place a temperature sensor with the gas sensor module to measure and control the temperature of micro-hotplate. A SnO₂ sensing layer is coated on LTCC micro-hotplate using screen printing and characterized for the sensing of carbon monoxide gas (CO). This study will be beneficial for designing hotplates based on LTCC technology with low power consumption and better stability of temperature for gas-sensing applications.     

Effect of ultrasound on thermoset polyurethane: NMR relaxation and diffusion measurements

Recycling of rubber-based materials is of increasing industrial environmental importance. In order to characterize the effect of ultrasound on polymer networks, nuclear magnetic resonance (NMR) relaxation and pulsed-gradient diffusion measurements were made at 70.5 °C in polyurethane rubber (PUR) and foam after subsequent treatment by intense ultrasound. The proton transverse relaxation decay was analyzed in terms of molecular and segmental mobilities of all motional species, a chemical and physical network as well as diffusing sol. The diffusivity spectrum, measurable in foams, reflected the changing molecular weight distribution of low-molecular weight sol and oligomers. It was observed that the effect of ultrasound was less pronounced in PUR than rubbers like SBR, PDMS and BR owing to its low degree of unsaturation. The investigation on the foams is the first of its kind to be reported.     

Partition oriented frame based fair scheduler

Proportionate fair schedulers provide an effective methodology for scheduling recurrent real-time tasks on multiprocessors. However, a drawback in these schedulers is that they ignore a task’s affinity towards the processor where it was executed last, causing frequent inter-processor task migrations which ultimately results in increased execution times. This paper presents Partition Oriented Frame Based Fair Scheduler (POFBFS), an efficient proportional fair scheduler for periodic firm and soft real-time tasks that ensures a bounded number of task migrations. Experimental results reveal that POFBFS can achieve 3 to 100 times reduction in the number of migrations suffered with respect to the General-ERfair algorithm (for a set of 25 to 100 tasks running on 2 to 8 processors) while simultaneously maintaining high fairness accuracy.     

P2P computing for intelligence of things

Peer-to-Peer Networking and Applications -     

Reactive flash sintering: MgO and α-Al2O3 transform and sinter into single-phase polycrystals of MgAl2O4

We show that flash experiments with three phase mixed-powders of yttria-stabilized zirconia (8YSZ), MgO, and α-Al₂O₃ not only produce polycrystals of high density, but also the transformation of magnesia and alumina into single-phase spinel. The presence of zirconia facilitates the onset of the flash. The sintering experiments in the laboratory were extended to live experiments at the National Synchrotron Light Source II at Brookhaven National Laboratory in order to measure the time-dependent evolution of single-phase spinel. The phase transformation occurred in <3 seconds during Stage II. Later, during Stage III the cubic zirconia transformed partly into the monoclinic phase, which reverted back to the cubic phase when the flash was extinguished by turning off the current to the specimen. The results underpin a recent report on the synthesis of single-phase bismuth ferrite from constituent oxides in reactive flash experiments, raising the specter of flash as a method for synthesis as well as sintering of complex oxide ceramics. The role of zirconia in catalyzing the flash in the present study is discussed.     

Data-Driven DPPM Estimation and Adaptive Fault Coverage Calibration Using MATLAB?

A manufacturing defect is a finite chip area with electrically malfunctioning circuitry caused by fabrication errors. The fraction of defective chips that escapes to the customer is called the defect level, also known as defective parts per million (DPPM, or simply PPM) when normalized to one million units. This paper demonstrates a technique used to correlate coverage goals to DPPM based on test fallout data using a MATLAB^?-based error function minimization approach. This analysis is explained using regression models for DPPM yield versus fault/defect coverage. This approach is beneficial to semiconductor companies for calibrating their fault coverage goals to meet DPPM requirements from automotive or other customers that have very aggressive (i.e., ultra-low) DPPM demands.     

Quantifying Biomediated Ground Improvement by Ureolysis: Large-Scale Biogrout Experiment

Biogrouting is a biological ground improvement method, in which microorganisms are used to induce carbonate precipitation in the subsurface in order to increase the strength and stiffness of granular soils. In this paper the results of a large-scale experiment (100?m3) are presented, in which the feasibility of biogrouting as a ground improvement method is investigated using techniques and equipment similar to those used in potential applications. In situ geophysical measurements were used to monitor the biogrouting process during treatment and indicated that the stiffness had increased significantly after one day of treatment. The results of unconfined compressive strength tests on samples which were excavated after treatment were used to assess the distribution of mechanical properties throughout the cemented sand body, which correlated quite well with the results of the in situ geophysical measurements. The stiffness increase could be quantified as a function of the injected volume of grouting agents and the distance from the injection points. These results will serve as an important benchmark for future applications of biomediated ground improvement.     

A Probabilistic and Decision Attitude Aggregation Operator for Intuitionistic Fuzzy Environment

In this paper, a new operator for aggregation of uncertain information under intuitionistic fuzzy environment is proposed. A novel approach is proposed for the selection of best alternative action in the face of the imprecise probabilities and the complex attitudinal character of the decision makers (DMs). This approach is distinguished with its capacity to accommodate the linguistic specification of probabilities as provided by human experts directly without the need to determine the fuzzy membership grades. The focus is to compute the net payoff for each alternative in the face of uncertain states of nature and DM's attitude. The proposed operator and the approach are illustrated through two real case studies.