Pull-Down of Metalloproteins in Their Native States by Using Desthiobiotin-Based Probes

One-third of all proteins are estimated to require metals for structural stability and/or catalytic activity. Desthiobiotin probes containing metal binding groups can be used to capture metalloproteins with exposed active-site metals under mild conditions so as to prevent changes in metallation state. The proof-of-concept was demonstrated with carbonic anhydrase (CA), an open active site, Zn²⁺-containing protein. CA was targeted by using sulfonamide derivatives. Linkers of various lengths and structures were screened to determine the optimal structure for capture of the native protein. The optimized probes could selectively pull down CA from red blood cell lysate and other protein mixtures. Pull-down of differently metallated CAs was also investigated.     

Synchronised carrier-based SVPWM signal generation scheme for the entire modulation range extending up to six-step mode using the sampled amplitudes of reference phase voltages

The issues in synchronised implementation of space vector-based pulse width modulation (SVPWM) signal generation are addressed on a conventional DSP platform. With the present day digital signal processors (DSPs) with clock over 10 MHz, it is possible to include additional tasks for synchronisation in the interrupt service routine (ISR). Also, the task of the synchronisation can be easily accommodated within the same ISR without disturbing the time critical pulse width modulation (PWM) operation. The authors systematically present the additional software requirements to determine the time period proportional to the half carrier switching time interval that is required for the synchronisation. First, the DSP implementation of the conventional multi-level SVPWM based on the sampled amplitudes of reference voltages is presented and then the additional requirements to maintain the PWM in synchronisation are discussed. The simulation results as well as experimental results are presented for a five-level PWM signal generation. A five-level inverter configuration, using a 1.5 kW open-end winding induction motor drive, is used for experimentally verifying the SVPWM     

Electrical conduction in non-metallic rare-earth solids

Schematic energy band diagrams for the genesis of charge carriers in non-metallic rare-earth solids have been presented. It has been shown that positions of 4f bands have significant effect on the genesis and nature of charge carriers, their conduction mechanism and magnitude of electrical conductivity () and Seebeck coefficient (S) of the solid. Relevant relations have been given for both and S in different situations. Experimental data on rare-earth sesquioxides (R₂O₃), rare-earth tungstates [R₂(WO₄)₃] and rare-earth molybdates [R₂(MoO₄)₃] in the intrinsic range have been explained as examples for the validity of energy band diagrams.     

Analytical studies on the temperature distribution in spiral plate heat exchangers: Straightforward design formulae for efficiency and mean temperature difference

The temperature distribution in spiral plate heat exchangers has been calculated numerically to obtain the efficiency and the logarithmic mean temperature difference (LMTD) correction factors F as a function of the number of transfer units N, the number of turns n, and the heat capacity rate ratio C. It has been found that the LMTD correction factors, when plotted against the number of transfer units per turn N/n, fall approximately on a single curve. That curve for balanced countercurrent operation (C = −1) can be very closely represented by the simple formula F = (n/N)tanh(N/n). From that simple analytic representation of our numerical results it was concluded that a simpler physical model might exist to represent the overall behaviour of a spiral plate heat exchanger equally well. In fact, a countercurrent cascade of n cocurrent heat exchangers does result exactly in the above-mentioned formula for the LMTD correction factor. From that model the F-factors for other heat capacity rate ratios C (−1 < C 0) can also be calculated and they are in sufficient agreement with the numerical results.     

An efficient algorithm for mass detection and shape analysis of different masses present in digital mammograms

The present study introduces an efficient algorithm for automatic segmentation and detection of mass present in the mammograms. The problem of over and under-segmentation of low-contrast mammographic images has been solved by applying preprocessing on original mammograms. Subtraction operation performed between enhanced and enhanced inverted mammogram significantly highlights the suspicious mass region in mammograms. The segmentation accuracy of suspicious region has been improved by combining wavelet transform and fast fuzzy c-means clustering algorithm. The accuracy of mass segmentation has been quantified by means of Jaccard coefficients. Better sensitivity, specificity, accuracy, and area under the curve (AUC) are observed with support vector machine using radial basis kernel function. The proposed algorithm is validated on Mini-Mammographic Image Analysis Society (MIAS) and Digital Database for Screening Mammography (DDSM) datasets. Highest 91.76% sensitivity, 96.26% specificity, 95.46% accuracy, and 96.29% AUC on DDSM dataset and 94.63% sensitivity, 92.74% specificity, 92.02% accuracy, and 95.33% AUC on MIAS dataset are observed. Also, shape analysis of mass is performed by using moment invariant and Radon transform based features. The best results are obtained with Radon based features and achieved accuracies for round, oval, lobulated, and irregular shape of mass are 100%, 70%, 64%, and 96%, respectively.     

Bootstrapping a weighted linear estimator of the ARCH parameters

Abstract.  A standard assumption while deriving the asymptotic distribution of the quasi maximum likelihood estimator in ARCH models is that all ARCH parameters must be strictly positive. This assumption is also crucial in deriving the limit distribution of appropriate linear estimators (LE). We propose a weighted linear estimator (WLE) of the ARCH parameters in the classical ARCH model and show that its limit distribution is multivariate normal even when some of the ARCH coefficients are zero. The asymptotic dispersion matrix involves unknown quantities. We consider appropriate bootstrapped version of this WLE and prove that it is asymptotically valid in the sense that the bootstrapped distribution (given the data) is a consistent estimate (in probability) of the distribution of the WLE. Although we do not show theoretically that the bootstrap outperforms the normal approximation, our simulations demonstrate that it yields better approximations than the limiting normal.     

Effect of Dopants and Sintering Method on the Properties of Ceria-Based Electrolytes for IT-SOFCs Applications

Doped and co-doped ceria ceramics are used as electrolyte materials in solid oxide fuel cells. In this work, ceria-based oxides, Ce_0.90Gd_0.06Y_0.02M_0.02O_2?δ (M?=?Ca, Fe, La, and Sr) were prepared by conventional as well as microwave processing from the precursors prepared by the mixed oxide method. The consolidated calcined powders in pellet form were sintered in microwave energy at 1400°C for 20 min and in an electric furnace of IR radiation at 1400°C for 6 h. The x-ray diffraction analysis confirmed that all the compositions were crystallized into a cubic fluorite structure. Surface morphology of the sintered products was studied using scanning electron microscopy and the microhardness was investigated using the Vickers hardness test. The comparative results analysis shows that the microwave-sintered samples have uniform grain growth, higher density and higher microhardness than the corresponding conventionally sintered products. The microwave-sintered sample of composition Ce_0.90Gd_0.06Y_0.02Sr_0.02O_2?δ was found to have the highest microhardness among the four compositions due to its high density and smallest grain size.     

Hydrogen peroxide sensing properties of PVA/TiO2/I2 nanocomposite‐based free standing membranes

The nanocomposite of titanium‐di‐oxide (TiO₂)/iodine (I₂) in polyvinyl alcohol (PVA) matrix has been explored to be used in hydrogen peroxide (H₂O₂) sensing applications for the first time. The proposed nanocomposite can be easily casted in the form of thin film on glass substrates as well as free standing membranes. These nanocomposite films and membranes exhibit reduced resistance values and easily observable colour changes in the presence of H₂O₂. The films also exhibit significant quenching in photoluminescence emission properties upon H₂O₂ exposure. These sensor responses have been attributed to redox reactions at nanocomposite films and H₂O₂ interface. This study indicates an easy to fabricate, flexible and environmental friendly sensing platform for H₂O₂. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42257.     

Tandem Chemoselective 1,2‐/1,4‐Migration of the Thio Group in Keto Thioesters: An Efficient Approach to Substituted Butenolides

We report herein an efficient and mechanistically unique tandem chemoselective 1,2‐/1,4‐migration of the thio group in keto thioesters that provides substituted butenolides in moderate to excellent yields. Thus, α‐keto thioesters in the presence of stabilized phosphonate carbanions undergo tandem 1,2‐sulfur migration; whereas 1,4‐migration of the thio group has been achieved with the same thioesters after the treatment with Wittig reagents followed by BF₃⋅OEt₂‐catalyzed tandem reaction. The crossover experiments and the isolation of intermediates reveal a stepwise mechanism for both of these transformations.