Recycling of multilayer packaging using a reversible cross-linking adhesive

Plastic-based multilayer packaging has an important function on the packaging market, but is currently not recyclable as the polymer layers used are usually thermodynamically immiscible. This work therefore follows the approach to prepare separable multilayer packaging using a packaging adhesive modified with thermally unstable adducts, and proposes a corresponding recycling process. For this purpose, typical multilayer structures (polyethylene (PE)// polyethylene terephtalate (PET), PET//aluminum, and PE//aluminum) were prepared by curing furan-/maleimide-functionalized polyurethane (PU)-prepolymers with a three-functional cross-linking agent. Adhesions of up to over 3N per 15 mm test specimen were measured or substrate failures of PET films were observed. However, heating in dimethylsulfoxide, the retro-Diels–Alder reaction takes place and the cross-linked adhesive turns thermoplastic and dissolves in the solvent. Thus, the laminate separates and the pure PE, PET, and aluminum foils can be recovered without any PU residue.     

Achievement of pencil-beam radiation from a TM01 modecircular waveguide source

A method employing appropriately placed parallel-metallic plates in the aperture of a TM₀₁ mode circular waveguide source so as to have it produce pencil-beam radiation is described and analyzed. Programmed computations, with experimental verification, are given for the case of a C-Band TM₀₁ source flared out to a conical horn so as to produce moderate (22 dBi) gain. Means of extending the method to achieve higher gains (40 dBi to 60 dBi) and to modify the plate arrangement so as to produce the same effect with a TE₀₁ mode are briefly outlined     

Induction of hapten-specific tolerance by interleukin 10 in vivo

Interleukin 10 (IL-10) is released during the induction phase of contact sensitivity and was shown in prior functional studies to convert epidermal Langerhans cells (LC) from potent inducers of primary immune responses to specifically tolerizing cells in vitro. To investigate whether IL-10 also subserves the function of a tolerizing agent in vivo ears of BALB/c or C3H mice were injected intradermally with 1-2 micrograms of recombinant mouse (rm)IL-10 8 h before epicutaneous application of 3% trinitrochlorobenzene (TNCB; a contact allergen). As a control, mice were injected with phosphate-buffered saline or IL-10 plus neutralizing amounts of anti-IL-10 mAb. 5 d later, mice were challenged with 1% TNCB on contralateral ears and ear swelling response was measured 24 h later. Whereas control-treated mice showed a normal ear swelling response to epicutaneous challenge (delta mm-2 = 25 +/- 5), ear swelling response of IL-10-treated animals was significantly inhibited (delta mm-2 = 3 +/- 2). Coinjection of IL-10-specific mAb together with rmIL-10 completely abrogated this effect. To differentiate between a state of nonresponsiveness and induction of tolerance by IL-10, mice initially treated with IL-10 and TNCB were resensitized with 3% TNCB in the absence of any treatment after 14 d of rest (group 1). Again mice were challenged 5 d later and ear swelling responses were tested. Whereas control mice treated with allergen alone (group 2) showed a good swelling response (delta mm-2 = 28 +/- 6), IL-10-treated mice (group 1) showed a minimal response towards application of allergen (delta mm-2 = 4 +/- 2). To show that anergy induction by IL-10 was antigen-specific, mice initially treated with IL-10 plus TNCB were exposed to 0.5% dinitrofluorobenzene (DNFB) 14 d later (group 1). After challenge with 0.1% DNFB, IL-10-treated mice showed an ear swelling response (delta mm-2 = 13 +/- 3; group 1) similar to that of control mice only sensitized with DNFB (delta mm-2 = 14 +/- 3; group 3). In an attempt to show the induction of antigen-specific tolerance in these mice in vitro, regional lymph nodes of mice initially treated with TNCB plus IL-10 (group 1) and control-treated mice (groups 2 and 3) were prepared and cultured in the presence of TNBS, dinitrobenzene sulfonate (DNBS), or medium to measure antigen-specific proliferation.(ABSTRACT TRUNCATED AT 400 WORDS)     

Role Models for Radical Innovations in Times of Open Innovation

In this paper, we study the influence of innovator roles in highly innovative ventures. In order to obtain a differentiated picture we take into account the degree of innovativeness as a moderating variable. To test our hypotheses we use a sample of 146 highly innovative new product development projects. We choose a rigorous sampling design and apply state‐of‐the‐art measures for the degree of innovativeness. Furthermore, we apply multi‐trait‐multi‐method methodology (MTMM) to enhance the validity of our study. The results show that innovator roles have a strong influence on innovation success but these influences are positively and negatively moderated by innovativeness. The moderating influences depend on the type of innovativeness. Remarkably, with increasing technological innovativeness innovator roles which create inter‐organizational links with the outside world appear to be more important than intra‐organizational linker roles, and support from high‐ranked organizational members turns out to have a significant negative effect on project success with higher degrees of technological innovativeness. Possible explanations for these findings are discussed and consequences for innovation research and innovation management are shown.     

Plumbagin,a Biomolecule with (Anti)Osteoclastic Properties

Plumbagin is a plant-derived naphthoquinone that is widely used in traditional Asian medicine due to its anti-inflammatory and anti-microbial properties. Additionally, plumbagin is cytotoxic for cancer cells due to its ability to trigger reactive oxygen species (ROS) formation and subsequent apoptosis. Since it was reported that plumbagin may inhibit the differentiation of bone resorbing osteoclasts in cancer-related models, we wanted to elucidate whether plumbagin interferes with cytokine-induced osteoclastogenesis. Using C57BL/6 mice, we unexpectedly found that plumbagin treatment enhanced osteoclast formation and that this effect was most pronounced when cells were pre-treated for 24 h with plumbagin before subsequent M-CSF/RANKL stimulation. Plumbagin caused a fast induction of NFATc1 signalling and mTOR-dependent activation of p70S6 kinase which resulted in the initiation of protein translation. In line with this finding, we observed an increase in RANK surface expression after Plumbagin stimulation that enhanced the responsiveness for subsequent RANKL treatment. However, in Balb/c mice and Balb/c-derived RAW264.7 macrophages, these findings could not be corroborated and osteoclastogenesis was inhibited. Our results suggest that the effects of plumbagin depend on the model system used and can therefore either trigger or inhibit osteoclast formation.     

Characterization and tests of planar Co3O4 model catalysts prepared by chemical vapor deposition

The chemical vapor deposition method was used to deposit thin films of cobalt oxide starting with cobalt (II) acetylacetonate and oxygen. The deposition process was investigated and the obtained films were identified as a cubic spinel-type polycrystalline Co₃O₄ with a crystallite size of 30–40 nm. The coating was carbon-free and the surface oxygen concentration was measured to be 66 at.% with AES analysis. Smooth and highly uniform thin films were deposited on planar stainless steel substrates and subjected to TPR and catalysis tests that show positive correlation. The apparent activation energy of Co₃O₄ reduction to CoO was measured to be (33±5) kJ/mol. The catalytic activity of Co₃O₄ was investigated toward the conversion of both propane and ethanol to carbon dioxide. Though the catalytic action was registered at the same temperature, the deactivation process was seen to be different. The catalytic conversion of ethanol induces a fast deactivation process, which was linked to its high ability to reduce Co₃O₄.     

Characterisation of the adsorption sites of hydrogen on Pt/C fuel cell catalysts

A key component of a hydrogen fuel cell is a catalyst to dissociate dihydrogen to hydrogen atoms. In the present study, the adsorption of hydrogen on Pt/C fuel cell catalysts has been investigated by inelastic neutron scattering spectroscopy.

Monitoring a clean Pt(50%)/C catalyst with low energy neutron spectroscopy, after exposure to dihydrogen at 20 K, as it was heated to room temperature, showed three distinct temperature regimes: (i) a decrease in intensity from 10 to 60 K, (ii) a rise to a maximum between 60 and 120 K and then (iii) a slow fall-off towards room temperature. We assign the three regions as: (i) desorption of physisorbed dihydrogen, (ii) dissociation of dihydrogen to give an adsorbed layer and (iii) damping of the response by an increasing Debye–Waller factor.

The vibrational INS spectra of a series of Pt/C catalysts prepared under varying conditions were similar indicating that the same types of site are common to all the catalysts, although the relative proportions of each site are sample dependent. Features at 520, 950 and part of the intensity at 1300 cm⁻¹ are assigned to hydrogen on (1 1 1) faces, in good agreement with single crystal data. The mode at 640 cm⁻¹ is assigned as the doubly degenerate asymmetric stretch of Pt(1 0 0) faces with the symmetric stretch near 550 cm⁻¹.

We assign the bending mode of the on-top site to the feature at 470 cm⁻¹. The Pt–H stretch mode was observed at 2079 cm⁻¹. This is a significant result: this is the first time that hydrogen on the on-top sites has been observed on nanosized platinum particles supported on high surface area carbon black. The width of the INS peak is surprisingly large and may give additional information on the type and relative proportions of the crystallographic faces present on the catalyst particles.     

Adsorption mode of ethyl pyruvate on platinum: an in situ XANES study

The adsorption of ethyl pyruvate on Pt(111) has been studied by in situ XANES measurements in the presence and absence of hydrogen. Depending on the hydrogen and ethyl pyruvate pressure, the C and O K‐edge spectra exhibit distinctly different angular dependence. Without hydrogen ethyl pyruvate is oriented preferentially perpendicular to the surface, indicating bonding via the O lone pairs. In the presence of hydrogen the mean orientation is more tilted towards the surface. Likely, ethyl pyruvate also interacts with Pt via its π system under these conditions. The observed angle‐dependent shift of the energy of the π* and σ* resonances indicates the coexistence of differently adsorbed ethyl pyruvate species. The experimental findings demonstrate the importance of the in situ approach for unraveling the adsorption mode of ethyl pyruvate in the enantioselective hydrogenation over cinchona‐alkaloid‐modified Pt. This revised version was published online in July 2006 with corrections to the Cover Date.