Breakdown of oil films and formation of residual films

The breakdown processes of oil films under quasi-static loading have been investigated by using a newly developed steel-oil-mercury system. The relationship between the thickness and breakdown ratio of a hexadecane film is represented by a single master curve independently of the indentation speed, indentation load, and temperature. The master curve shows that the breakdown process of hexadecane includes two stages; one is the decrement of the thickness without breakdown and the other is the decrement of the thickness with a drastic progress of breakdown. By solving a small amount of fatty acid in hexadecane, the thickness increases and the breakdown ratio decreases noticeably; a multilayer residual film supporting normal load is formed between two metal surfaces. Experiments at different temperatures reveal a negative relationship between the temperature and thickness of residual film, which indicates that the residual film is organized by physical interaction rather than chemical interaction. At least under a lower concentration, the residual film appears to consist of not only fatty acid molecules but also hexadecane molecules.     

Design of one-dimensional ferromagnet based on polyacetylene chain

As a model for organic ferromagnetism in a one-dimensional system, substituted polyacetylenes are re-considered on the basis of the molecular orbital (MO) and the crystal orbital (CO) methods. The semiempirical MO calculations with configuration interaction for the dimer model show that the exchange interaction on poly[(4-oxyphenyl)acetylene] (1) is negative in spite of Ovchinnikov's prediction, due to the direct interaction between the adjacent pendant spins. On the other hand, it is shown that a polyacetylene chain with phenoxy radicals as pendants on every other active site can become a one-dimensional feromagnet. Moreover, the CO calculations by means of the unrestricted Hartree-Fock method give a theoretical background for the realization of a ground state with macroscopic spin alignment on the improved model chain.     

Rutile-type TiO2 thin film for high-k gate insulator

We investigated rutile-type titanium dioxide (TiO₂) films for possible use as a high-k gate insulator. The TiO₂ thin films were directly deposited on Si substrates using a RF magnetron sputtering method with a sintered oxide target. A single phase of rutile-type TiO₂ whose dielectric constant of approximately 75 was obtained when the film was deposited in an inert gas atmosphere and annealed at 800 °C in an oxidizing gas atmosphere. The oxygen ions were deficient in the as-deposited film, and consequently, a sufficient oxygen supply was needed to crystallize the film to a single phase of rutile during the post-annealing. However, the interfacial SiO₂ layer between the TiO₂ and the Si substrate simultaneously grew thicker than 2 nm. As the interfacial SiO₂ grew, the leakage current was decreased and the equivalent oxide thickness was increased, in the Au/rutile-type TiO₂/Si capacitor. Therefore, we concluded that the growth of the interfacial SiO₂ layer thicker than 2 nm is inevitable to form the single phase of rutile-type TiO₂ and to decrease the leakage.     

Improved performance of subcarrier multiplexed multichannel AM-VSBvideo signal transmission using Pr3+-doped fluoride fibreamplifier

The performance of 40 channel AM-VSB video signal transmission using a Pr³⁺-doped fluoride fibre amplifier (PDFA) was examined. The PDFA improves the loss budget by 10 dB for 52 dB CNR, and distortion levels almost satisfy the CATV trunk line specifications. The video quality degradation after PDFA amplification was `imperceptible' in subjective tests     

Neutronic and thermodynamic feasibility of UF6-NpF6 fueled transmutation reactor

Transmutation of neptunium, which is contained in radioactive wastes discharged from nuclear reactors, was investigated as a substitutional method for geologic disposal. We proposed a transmutation reactor fueled with a mixture of gaseous ²³³UF₆ and ²³⁷NpF₆. Neutronic and thermodynamic analysis of the reactor revealed the feasibility of the concept. The reactor has two principal advantages: (1) use of the fuel gas enables on-line reprocessing, (2) ²³⁷Np can be transmuted by a high neutron flux. Our calculation indicated that the transmutation rate of ²³⁷Np was 335 g/year/MW_th, which is much larger than the annual yield of ²³²Np in PWR (6.19 g/year/MW_th).     

NiCoFe/C cathode electrocatalysts for direct ethanol fuel cells

A direct ethanol fuel cell (DEFC), which is less prone to ethanol crossover, is reported. The cell consists of PtRu/C catalyst as the anode, Nafion^® 117 membrane, and Ni–Co–Fe (NCF) composite catalyst as the cathode. The NCF catalyst was synthesized by mixing Ni, Co, and Fe complexes into a polymer matrix (melamine-formaldehyde resins), followed by heating the mixture at 800 °C under inert atmosphere. TEM and EDX experiments suggest that the NCF catalyst has alloy structures of Ni, Co and Fe. The catalytic activity of the NCF catalyst for the oxygen reduction reaction (ORR) was compared with that of commercially available Pt/C (CAP) catalyst at different ethanol concentrations. The decrease in open circuit voltage (V_oc) of the DEFC equipped with the NCF catalysts was less than that of CAP catalyst at higher ethanol concentrations. The NCF catalyst was less prone to ethanol oxidation at cathode even when ethanol crossover occurred through the Nafion^®117 film, which prevents voltage drop at the cathode. However, the CAP catalyst did oxidize ethanol at the cathode and caused a decrease in voltage at higher ethanol concentrations.     

中国充电器标准化带来的变化

中国政府率先开始了手机充电器的标准化,其目的是让用户更换手机终端后可继续使用原来的充电器,从而通过削减废弃物达到保护环境的目的。     

IAEA activities on Mmall and Medium Reactors: Harmonization of energy demand and supply in developing countries

Small and Medium Reactors (SMRs) are attractive in developing countries because of their unique features such as: better suitability for smaller electric grids, lower investment cost, smaller components and equipment to facilitate modularization, etc. Furthermore, other factors induced by SMR implementation, such as technical transfer promotion, domestic infrastructure improvement, stabilization of energy cost, and environmental protection put SMRs into a more favorable position. From the nuclear plant suppliers, many SMR designs are available for a wide range of applications. A questionnaire study, which the IAEA conducted in 1996, confirmed that several countries are interested in SMRs and that some SMRs are already in the detailed design stage. A projection shows that the total nuclear capacity would increase in all regions that consist mainly of developing countries in the near future. For a timely and broad implementation of SMRs, information exchange and cooperation are indispensable between nuclear suppliers and buyers. The IAEA continues to play a role in encouraging and assisting development and practical application of SMRs for harmonization of energy demand and supply in developing countries.     

Effect of Grain Boundaries on Thermal Conductivity of Silicon Carbide Ceramic at 5 to 1300 K

The thermal conductivity of a SiC ceramic was measured as 270 W·m⁻¹·K⁻¹ at room temperature. At low temperatures ( T < 25 K), the decrease in the conductivity was proportional to T ³ on a logarithmic scale, which indicated that the conductivity was controlled by boundaries. The calculated phonon mean free path in the ceramic increased with decreased temperature, but was limited to ∼4 μm, a length almost equal to the grain size, at temperatures below 30 K. We concluded that the thermal conductivity of the ceramic below 30 K was influenced significantly by grain boundaries and grain junctions.