Multi-input,multi-output flight control system design for the YF-16 using nonlinear QFT and pilot compensation

Nonlinear quantitative feedback theory (QFT) and pilot compensation techniques are used to design a 2 × 2 flight control system for the YF-16 aircraft over a large range of plant uncertainty. The design is based on numerical input-output time histories generated with a FORTRAN implemented nonlinear simulation of the YF-16. The first step of the design process is the generation of a set of equivalent linear time-invariant (LTI) plant models to represent the actual nonlinear plant. It has been proven that the solution to the equivalent plant problem is guaranteed to solve the original nonlinear problem. Standard QFT techniques are then used in the design synthesis based on the equivalent plant models. A detailed mathematical development of the method used to develop these equivalent LTI plant models is provided. After this inner-loop design, pilot compensation is developed to reduce the pilot's workload. This outer-loop design is also based on a set of equivalent LTI plant models. This is accomplished by modelling the pilot with parameters that result in good handling qualities ratings, and developing the necessary compensation to force the desired system responses.     

Circuits and techniques for high-resolution measurement of on-chip power supply noise

This paper presents a technique for characterizing the statistical properties and spectrum of power supply noise using only two on-chip low-throughput samplers. The samplers utilize a voltage-controlled oscillator to perform high-resolution analog-to-digital conversion with minimal hardware. The measurement system is implemented in a 0.13-/spl mu/m process along with a high-speed link transceiver. Measured results from this chip validate the accuracy of the measurement system and elucidate several aspects of power supply noise, including its cyclostationary nature.     

Xylene Isomerization in a ZSM-5/SS Membrane Reactor

A membrane reactor containing different types of ZSM-5/porous SS membranes was used to perform the xylene isomerization reaction. The parent Na-ZSM-5 layer was synthesized by secondary growth on top of porous stainless steel tubes. The xylene isomerization reaction was carried out at different temperatures in the membrane reactor and in a fixed-bed reactor of identical geometry for comparison. Two different kinds of membranes were prepared by ion exchange: a Pt/H-ZSM-5 catalytic membrane and two Ba-ZSM-5 composites with different Ba²⁺ concentration. The p-xylene production using 100% exchanged Ba-membrane was about 28% higher than the fixed-bed reactor at 370 °C, when m-xylene was fed.     

Serum amyloid P component scintigraphy and turnover studies for diagnosis and quantitative monitoring of AA amyloidosis in juvenile rheumatoid arthritis

OBJECTIVE: To evaluate aspects of the natural history of AA amyloidosis complicating juvenile rheumatoid arthritis (JRA), and its response to therapy with chlorambucil. METHODS: Scintigraphy and 7-day turnover studies were performed in JRA patients with histologically proven (n = 35) or clinically suspected (n = 30) AA amyloidosis, following intravenous injection of 123I and 125I-labeled serum amyloid P component (SAP). Prospective monitoring studies were performed over 2-3 years in 20 patients with amyloidosis. All but 2 amyloidosis patients were treated with chlorambucil. RESULTS: Positive scanning results were obtained in all patients in whom imaging was performed within 12 years of positive biopsy findings of amyloid and in 5 patients with clinically suspected amyloidosis. Negative scanning results with normal SAP metabolism, indicating regression of amyloid, were obtained in 4 patients whose amyloidosis had been in full clinical remission for more than 12 years. Prospective monitoring studies in patients whose JRA-associated inflammatory activity was in remission demonstrated regression of amyloid in 8 patients and no substantial changes in 8 others; however, in 4 further patients with active inflammation, there was accumulation of amyloid. There was a very poor correlation between the amount of amyloid present at a particular site and the resultant organ dysfunction. CONCLUSION: Radiolabeled SAP scintigraphy and turnover studies are useful complementary tools in the diagnosis, screening, and quantitative monitoring of type AA amyloidosis in JRA. The amyloid deposits may progress and/or regress at different rates in different anatomic sites over short periods.     

Carbachol, an acetylcholine receptor agonist, enhances production in rat aorta of 2-arachidonoyl glycerol, a hypotensive endocannabinoid

Orphanin FQ/nociceptin binds with high affinity to the orphan opioid receptor-like/K-3 (ORL1/KOR-3) clone, and stimulates feeding. The present study demonstrated that antisense oligodeoxynucleotides directed against either exons 1, 2 or 3 of the ORL1/KOR-3 clone reduced orphanin FQ/nociceptin-induced hyperphagia. A missense probe was ineffective. Naltrexone dose-dependently reduced orphanin FQ/nociceptin-induced hyperphagia. These data suggest that the receptor responsible for orphanin FQ/nociceptin-induced hyperphagia is encoded by the ORL1/KOR-3 clone.     

Circuit techniques for large CSEA SRAMs

The CMOS-storage emitter-access (CSEA) memory cell offers faster access than the MOS cells used in conventional BiCMOS SRAMs but using it in large memory arrays poses several problems. Novel BiCMOS circuit approaches to address the problems of decoding power, electronic noise, level translation, and write disturbance are described. Results on a 64-kb CSEA SRAM using these techniques are reported. The device, fabricated in an 0.8-μm BiCMOS technology, achieves read access and write pulse time of less than 4 ns while dissipating 1.7 W at a case temperature of 70°C     

Juror competence in civil trials: Effects of preinstruction and evidence technicality.

48 jury-eligible adults heard 1 of 4 versions of a tort trial. The design combined high and moderate levels of evidence technicality and the placement of substantive judicial instructions either before or after evidence presentation. Jurors given instructions before hearing the evidence for liability and before the evidence for compensation made clear distinctions among 4 differentially worthy plaintiffs, whereas jurors instructed after evidence presentation were not able to distinguish among the plaintiffs. Preinstructions enabled jurors to devise a causal model, as measured by both verbal representation of the evidence and recognition tests, that contained more probative evidence and less nonprobative and evaluative information than the models constructed by jurors who were postinstructed. Preinstructed jurors were better able than postinstructed jurors to correctly reject recognition items not part of the trial text and to correctly identify items from the trial. (PsycINFO Database Record (c) 2010 APA, all rights reserved)