An ERP software selection process with using artificial neural network based on analytic network process approach

An enterprise resource planning (ERP) software selection is known to be multi attribute decision making (MADM) problem. This problem has been modeled according with analytic network process (ANP) method due to fact that it considers criteria and sub criteria relations and interrelations in selecting the software.Opinions of many experts are obtained while building ANP model for the selection ERP then opinions are reduced to one single value by methods like geometric means so as to get desired results. To use ANP model for the selection of ERP for a new organization, a new group of expert’s opinions are needed. In this case the same problem will be in counter. In the proposed model, when ANP and ANN models are setup, an ERP software selection can be made easily by the opinions of one single expert. In that case calculation of geometric mean of answers that obtained from many experts will be unnecessary. Additionally the effect of subjective opinion of one single decision maker will be avoided. In terms of difficulty, ANP has some difficulties due to eigenvalue and their limit value calculation.An ANN model has been designed and trained with using ANP results in order to calculate ERP software priority. The artificial neural network (ANN) model is trained by results obtained from ANP. It seems that there is no any major difficulty in order to predict software priorities with trained ANN model. By this results ANN model has been come suitable for using in the selection of ERP for another new decision.     

High-Modulus Columns for Liquefaction Mitigation

This paper presents the performance of a shopping complex in Turkey where the soils were improved with jet-grout columns and preload fills and subjected to the 1999 Kocaeli Earthquake (M = 7.4). Under construction at the time of the earthquake, the Carrefour Shopping Center covers an area of 55,000?m2 and is founded on shallow footings, mats, and slabs-on-grade that rest on soft, saturated alluvial sediments consisting of clays, silts, and sands. High-modulus columns constructed by jet grouting were installed at close-to-moderate spacings to reduce anticipated static settlements in the clays and mitigate liquefaction in the sands. The site was subjected to a peak acceleration of approximately 0.2g during the earthquake. Grouting had been completed for about two-thirds of the site when the earthquake struck. Following the event, a field reconnaissance found stark contrast between the performance of the improved and unimproved sections. The jet-grout-treated areas suffered no apparent damage, whereas the unimproved sections of the complex, along with nearby untreated building sites, commonly suffered liquefaction-related settlements of up to 10 cm. This is the only case history known to the authors that documents the field performance of high-modulus columns used in this manner for liquefaction mitigation and direct instrumented measurement of liquefaction-induced settlements.     

Adaptive neuro-fuzzy inference system for computing the resonant frequency of electrically thin and thick rectangular microstrip antennas

A new method based on adaptive neuro-fuzzy inference system (ANFIS) for calculating the resonant frequency of rectangular microstrip antennas (MSAs) with thin and thick substrates is presented. The ANFIS has the advantages of expert knowledge of fuzzy inference systems (FISs) and learning capability of artificial neural networks (ANNs). A hybrid learning algorithm, which combines the least square method and the backpropagation algorithm, is used to identify the parameters of ANFIS. The resonant frequency results obtained by using ANFIS are in excellent agreement with the experimental results reported elsewhere.     

Magnetic Properties of Zn1?x Ni x O (0.25≤x≤ 0.50) Prepared by Solid-State Reactions

In this study the origin of ferromagnetism in ZnO-based bulk systems has been investigated using Ni-doped ZnO samples, Zn_1−x Ni _x O with 0.25≤x≤0.50, prepared by solid-state reactions. The structural characterizations indicated that the Ni²⁺ ions almost uniformly distributed in all the samples, and the samples have hexagonal wurtzite structure; however, when x is increased toward 0.50, a new NiO phase is formed. A ferromagnetism (FM) has been observed for all the samples at and below the room temperature. In other words, the room temperature results of (M–H) curves show that the FM observed is intrinsic for all the Ni-doped ZnO samples. However, the saturated magnetizations decrease gradually with increasing Ni concentration. This indicates that, in addition to FM, the excessive doping of Ni in ZnO also causes an antiferromagnetic (AFM) contribution which increases with increasing Ni amount. This result is also supported by the magnetization against temperature measurements. Furthermore, the trend of the ac-susceptibility (χ) versus temperature curves, measured under an ac-magnetic field of 100 Oe, also support our conclusion about the antiferromagnetic contribution to ferromagnetism in our samples.     

Reflective light modulator based on epsilon-GaSe crystal

We report the results of investigating a low-voltage, polarization-insensitive, reflective-type modulator based on an epsilon-GaSe crystal and operated at the 1.960-eV line of a He-Ne laser. We demonstrate that the modulation in an Al-epsilon-GaSe-Cu device results mainly from the Franz-Keldysh effect. Relatively high speed and low operating voltage could make these modulators with Schottky-barrier contacts attractive devices in the red range of the spectrum.     

The variation of the dielectric constant and loss index with temperature and draw ratio in α‐PVDF

In this study, the effect of measurement temperature and uniaxial drawing on the real (dielectric constant, ε′) and imaginary (loss index, ε″) parts of the complex dielectric constant of α‐crystalline phase poly(vinylidene fluoride) (PVDF) was investigated. The samples having different draw ratios (λ) were obtained by drawing the PVDF film at constant speed and temperature. The dielectric measurements were performed in the frequency range of 100 Hz–1 MHz and in the temperature range of 80–400 K. Although ε′ and ε″ were not affected by the orientation process during the β‐relaxation transition, it was observed that there were systematical variations for the α‐relaxation transition. ε′ and ε″ showed different behaviors depending on the draw ratio at different temperatures. Especially, ε″ was more affected by the orientation process at 380 K. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009