Strain-induced transformation and plastic deformation behaviour of a 17Cr-7Ni-1Al steel at high hydrostatic pressure

Tensile tests of a 17Cr-7Ni-1Al steel were carried out at 0.1, 300 and 600 MPa hydrostatic pressure, and the mechanical properties of the material were found to be considerably changed by the pressure. The martensitic transition temperatureM _s decreased under pressure. The volume fraction of-martensite induced by tensile deformation increased with strain, but was suppressed by hydrostatic pressure. The yield stress increased with pressure. The yield surface became a nonlinear cone with a pointed apex. The stress-strain curve was considerably changed by pressure, and was expressed by a modified identical-strain model (law of mixture) as a quantitative function. Uniform-strain limit increased with pressure. It was found that these changes were not caused by the mechanical effect of hydrostatic pressure, but by its thermodynamic effects.     

Prolonged degradation of end-capped polyelectrolyte multilayer films

Cationic chitosan (CT) and anionic dextran sulfate (Dex) were layer-by-layer (LbL) assembled from aqueous solutions containing 1 M NaCl on a quartz crystal microbalance (QCM) substrate, and the original films ((CT-Dex)₃-CT)) were end-capped with LbL assembly from CT solutions containing 1 M NaCl and Dex solutions without NaCl. The enzymatic degradation of films by chitosanase was quantitatively analyzed by QCM in terms of numbers of end-capping steps. The degradation of films end-capped with (Dex-CT)₃ was considerably prolonged when compared to those end-capped with other end-capping steps. A mechanism for the prolonged degradation was proposed by quantitative QCM data and zeta potential results.     

Syngas production by biomass gasification using Rh/CeO2/SiO2 catalysts and fluidized bed reactor

We have been developed novel catalysts for gasification of biomass with much higher energy efficiency than conventional methods (non-catalyst, dolomite, commercial steam reforming Ni catalyst). From the result of the gasification of cellulose over novel Rh/CeO₂/SiO₂ catalysts, it is found that the gasification process consists of the reforming of tar and the combustion of solid carbon. We also tested novel Rh/CeO₂/SiO₂ in the gasification with air, pyrogasification, and steam reforming of cedar wood. As a result, Rh/CeO₂/SiO₂ gave higher yield of syngas than the conventional steam reforming Ni catalyst. Furthermore, we compared the performance between single and dual bed reactors. Single bed reactor was effective in the gasification of cedar, however, it was not suitable for the gasification of rice straw since a rapid deactivation was observed. Gasification of rice straw, jute stick, baggase using the fluidized dual-bed reactor and Rh/CeO₂/SiO₂ was also investigated. Especially, the catalyst stability in the gasification of rice straw clearly was enhanced by using the fluidized dual bed reactor.     

Resistance to sulfur poisoning of hot gas cleaning catalysts for the removal of tar from the pyrolysis of cedar wood

In the partial oxidation of tar derived from the pyrolysis of cedar wood, the effect of H₂S addition was investigated over non-catalyst, steam reforming Ni catalyst, and Rh/CeO₂/SiO₂ using a fluidized bed reactor. In the non-catalytic gasification, the product distribution was not influenced by the presence of H₂S. Steam reforming Ni catalyst was effective for the tar removal without H₂S addition, however, the addition of H₂S deactivated drastically. In contrast, Rh/CeO₂/SiO₂ exhibited higher and more stable activity than the Ni catalyst even under the presence of high concentration of H₂S (280 ppm). On the Ni catalyst, the adsorption of sulfur was observed by XPS and Ni species was oxidized during the partial oxidation of tar. In the case of Rh/CeO₂/SiO₂, the adsorption of sulfur was below the detection limit of XPS. This can be related to the self-cleaning of catalyst surface during the circulation in the fluidized bed reactor for the partial oxidation of tar derived from cedar pyrolysis.     

Catalyst Design of Pt-Modified Ni/Al2O3 Catalyst with Flat Temperature Profile in Methane Reforming with CO2 and O2

Pt(0.3)/Ni(10)/Al₂O₃, prepared by a sequential impregnation method, exhibited a more excellent performance in methane reforming with CO₂ and O₂ in terms of the catalytic activity and the temperature profile of the catalyst bed than Pt(0.3) + Ni(10)/Al₂O₃ prepared by a coimpregnation method, Ni(10)/Al₂O₃, Pt(0.3)/Al₂O₃, and Pt(10)/Al₂O₃. It is thought that this is because the surface Pt atoms on Ni catalyst can contribute to the enhancement of the catalyst reducibility.     

A procedure to analyze surface profiles of the protein molecules visualized by quick-freeze deep-etch replica electron microscopy

Quick-freeze deep-etch replica electron microscopy gives high contrast snapshots of individual protein molecules under physiological conditions in vitro or in situ. The images show delicate internal pattern, possibly reflecting the rotary-shadowed surface profile of the molecule. As a step to build the new system for the "Structural analysis of single molecules", we propose a procedure to quantitatively characterize the structural property of individual molecules; e.g. conformational type and precise view-angle of the molecules, if the crystallographic structure of the target molecule is available. This paper presents a framework to determine the observed face of the protein molecule by analyzing the surface profile of individual molecules visualized in freeze-replica specimens. A comprehensive set of rotary-shadowed views of the protein molecule was artificially generated from the available atomic coordinates using light-rendering software. Exploiting new mathematical morphology-based image filter, characteristic features were extracted from each image and stored as template. Similar features were extracted from the true replica image and the most likely projection angle and the conformation of the observed particle were determined by quantitative comparison with a set of archived images. The performance and the robustness of the procedure were examined with myosin head structure in defined configuration for actual application.     

Relationship between electron sensitivity and chemical structures of polymers as electron beam resists. VI: Electron sensitivity of various acetalized poly(vinyl alcohol)s

Acetalized poly(vinyl alcohol)s which were synthesized from poly(vinyl alcohol) (PVA) and aldehyde or ketone were evaluated as electron beam (EB) resists, in order to investigate the relationship between EB sensitivity and chemical structures of the polymers. It was found that the acetalized PVAs were easily crosslinked by EB exposure. The main mechanism of crosslinking may be radical reaction at acetal group. The sensitivity of the acetalized PVA depended on the structure of the acetal group. Acetalized PVAs synthesized from benzaldehyde, in which the electron attracting group was substituted on the benzene ring and from linear aliphatic aldehyde having a long alkyl chain, had high sensitivity. A high sensitivity of 7.2 × 10⁻⁷ C/cm² was attained when the acetalized PVA synthesized from p-chloro-benzaldehyde was used. Acetalized PVAs synthesized from PVA and aldehyde having a cyclic structure had an excellent dry etching durability and were suitable as negative EB resists.     

Dietary eritadenine-induced alteration of molecular species composition of phospholipids in rats

The effect of dietary eritadenine, a hypocholesterolemic compound found in the mushroomLentinus edodes, on the fatty acid and molecular species profiles of phosphatidylcholine (PC) and phosphatidylethanolamine (PE) in the plasma and liver microsomes was investigated in relation to the hypocholesterolemic action of the compound in rats. Animals were fed the control or eritadenine-supplemented (50 mg/kg diet) diet for 14 d. Eritadenine supplementation significantly decreased the plasma concentrations of cholesterol and phospholipids, but not triglycerides. The PC/PE ratio of liver microsomes, but not plasma, was also markedly decreased by eritadenine. Eritadenine supplementation was found to increase the proportion of 18:2n-6 and, inversely, to decrease the proportion of 20:4n-6 and 22:5n-6 in plasma PC and liver microsomal PC and PE, indicating that eritadenine depressed the metabolism of linoleic acid. The effect of eritadenine on the profile of n-3 fatty acids was dissimilar in PC and PE. These changes in fatty acid composition were selectively reflected in the molecular species composition of both PC and PE; the extent of increase in 16:0–18:2 molecular species or decrease in 18:0–20:4 molecular species was apparently greater than that of other molecular species containing 18:2 or 20:4 in the sn-2 position. These results suggest that, in addition to the decrease in liver microsomal PC/PE ratio, the alteration of plasma PC molecular species composition might also participate in the hypocholesterolemic action of eritadenine.     

A multilevel-voltage source rectifier with a three-phase diodebridge circuit as a main power circuit

A novel system obtaining very low distorted waveforms of input AC currents of three-phase rectifier circuits are proposed. The proposed rectifier system consists of a three-phase diode bridge circuit as a main power circuit, AC reactors, and an additional circuit which serves as an active filter with low switching frequencies and a forced-commutation circuit for the diodes. This paper describes the operation principle, analysis of the waveforms of input voltage and current, multiple phase-shifted systems, and the experimental results. The proposed system gives excellent input current waveforms and has many advantages over conventional systems