On Heating and Relaxation of the Electron—Hole-Gas Energy in the Track of a Primary Recoil Atom

Semiconductors - On the basis of the Monte Carlo algorithm, a method for calculating the energy spectrum of hot nonequilibrium electrons and holes in the track of a primary recoil atom after being...     

Migration of Point Defects in the Field of a Temperature Gradient

The influence of the temperature gradient over the thickness of the cladding of a fuel element of a fast-neutron reactor on the migration of point defects formed in the cladding material due to neutron irradiation has been studied. It has been shown that, under the action of the temperature gradient, the flux of vacancies onto the inner surface of the cladding is higher than the flux of interstitial atoms, which leads to the formation of a specific concentration profile in the cladding with a vacancy-depleted zone near the inner surface. The experimental results on the spatial distribution of pores over the cladding thickness have been presented with which the data on the concentration profiles and vacancy fluxes have been compared.     

Electrical Properties of GeO2–NiO Materials Containing Ni2GeO4

The GeO₂–NiO system is studied in the stability range of Ni₂GeO₄ by temperature-dependent resistivity measurements, in combination with x-ray diffraction, differential thermal analysis, and thermogravimetry. The resistivity of the starting mixtures and heat-treated samples is measured in the composition range 55–90 mol % NiO. The effect of air humidity on the resistivity of the samples is examined.     

Catalytic aminolysis of epoxide by alumina prepared from amine-protected Al precursor

The catalytic activities of alumina prepared from an Al alkoxide-amine adduct monomer for the reaction of cyclopentene oxide with piperidine was determined after various pretreatments, including calcination and exposure to moisture. They were compared with the activity of alumina prepared by the conventional hydrolysis method. It was found that the as-prepared sample from the alkoxide-amine monomer preparation was five times more active than a conventional preparation, suggesting that it has a higher density of surface Lewis acid sites. However, its activity was much more severely suppressed by exposure to moisture.     

Nitriding of steel parts for machine construction in an endothermic atmosphere

Conclusion To ensure the required characteristics of the diffusion layer in heat-resistant steels, it is recommended to subject them to two-stage nitriding: saturation at 950°C for 2 h in endogas with an addition of 12% natural gas and 4% ammonia, lowering the temperature to 900°C, holding for 5 h in endogas with an addition of 6% natural gas and 4% ammonia; exchange of gas 6 times.Translated from Metallovedenie i Termicheskaya Obrabotka Metallov, No. 4, pp. 34–36, April, 1982.     

On the nonuniformity of a capillary flow

It is established that the capillary rise of a liquid has an oscillatory character, in contrast to the commonly accepted opinion that a vertical capillary is filled at a monotonically varying velocity. The value of the tangential shear stress arising in an ascending liquid is evaluated for ethyl alcohol and distilled water.     

The effect of surface modification of vulcanized rubbers on the adhesive strength

Results of a study are reported on the utilization of ground vulcanizate, which is a waste product of rubber prcoessing plants. Loaded stocks of various commercial rubbers act as objects for the study. Talc, kaolin, silicon dioxide, and furnace carbon black are used as fillers. According to the results of a study on the effect of the amount of rubber crumb, an increase in the content of unmodified crumb leads to a decrease in tear resistance that is associated with poor wettability. To increase wettability, we use organosilicon couplings. It is shown that the addition of vulcanizate to rubber stocks, together with highly dispersed fillers treated with organosilicon couplings, leads to a significant increase in tear resistance and makes it possible to significantly reduce the cost of production and utilization.     

Raising the accuracy of operative monitoring by using a variable pressure differential of the flow rate of material and energy carriers in the liquid and gaseous states

Means are considered for reducing the systematic errors in calculating the flow rate of material. For operative monitoring of the day- to- day flow rate, a comparative analysis is made of the numerical solution of the mass flow rate equation and the structure- generalized method for solving the equation.Translated from Izmeritel'naya Tekhnika, No. 5, pp. 37–39, May, 1994.