Shape Factor Effect on Inclusion Sedimentation in Aluminum Melts

Metallurgical and Materials Transactions B - The quality requirements of aluminum products are steadily increasing, and the presence of non-metallic inclusions have a large impact on the quality of...     

Characterization of expression of phosphofructokinase isoforms in isolated rat pancreatic islets and purified beta cells and cloning and expression of the rat phosphofructokinase-A isoform

We prepared polymers having a phospholipid polar group, poly [omega-methacryloyloxyalkyl phosphorylcholine (MAPC)-co-n-butyl methacrylate(BMA)], as new biomedical materials and evaluated their blood compatibility with attention to protein adsorption and platelet adhesion. The total amount of proteins adsorbed on the polymer surface from human plasma was determined, and the distribution of adsorbed proteins on the plasma-contacting surface was analyzed. The amount of proteins adsorbed on every poly (MAPC-co-BMA) was small compared with that observed on polymers without the phospholipid polar group. However, there was no significant difference in the amount of adsorbed proteins on the poly(MAPC-co-BMA) even when the methylene chain length between the phospholipid polar group and the backbone in the MAPC moiety was altered. Platelet adhesion on the polymer surface from a platelet suspension in a buffered solution was evaluated with and without plasma treatment on the surface. When a rabbit platelet suspension was brought into contact with the poly(BMA) surface after treatment with plasma, many platelets adhered and aggregated. However, a reduced amount of platelet adhered on the poly(BMA) was found in the case of direct contact with the platelet suspension. On the other hand, the poly(MAPC-co-BMA)s could inhibit platelet adhesion under both conditions. Based on these results, it can be concluded that the proteins adsorbed on the surface play an important role in determining the platelet adhesion and suppression of the protein adsorption on the surface, which is one of the most significant ways of inhibiting platelet adhesion.     

A decision-making approach to the operation of flexible manufacturing systems

This paper introduces a generic decision-making framework for assigning resources of a manufacturing system to production tasks. Resources are broadly defined production units, such as machines, human operators, or material handling vehicles; and tasks are activities performed by resources. In the specific context of FMS, resources correspond to individual machines; tasks correspond to operations to be performed on parts. The framework assumes a hierarchical structure of the system and calls for the execution of four consecutive steps to make a decision for the assignment of a resource to a task. These steps are 1) establishment of decision-making criteria, 2) formation of alternative assignments, 3) estimation of the consequences of the assignments, and 4) selection of the best alternative assignment. This framework has been applied to an existing FMS as an operational policy that decides what task will be executed on which resource of this FMS. Simulation runs provide some initial results of the application of this policy. It is shown that the policy provides flexibility in terms of system performance and computational effort.     

The influence of hydroelectric power generation on the body composition of juvenile Atlantic salmon

The fat and protein content, and thus energy resources of young (parr) Atlantic salmon (Salmo salar) were examined in a temperate river. Juvenile salmon exhibited distinct seasonal patterns of energy storage and use. The lowest levels of energy were found towards the end of winter (mean mass specific energy about 4.3 kJ·g^?1). There was a rapid accumulation of fat in spring/early summer in spite of low‐water temperatures (highest mean content of mass specific energy of about 5.0 kJ·g^?1 in June). By early autumn (August) there was a rapid depletion of fat and energy resources. The decline in specific energy during late summer was of the same magnitude as the corresponding winter decline. Furthermore, total fat and protein content, and thus energy resources of juveniles below a hydroelectric power plant (hydrostation (HS)) differed from those at a (lower) reference station (RS). The younger fish exhibited higher gains, but also larger losses of energy resources compared to corresponding values at the RS. Specifically during the summer, young of year (YOY) had 31% lower total energy content at the regulated site (mean 1.27 kJ per individual) than the RS (mean 1.84 kJ). Higher mortality may occur at the site most affected by the hydroelectric plant, where energy resources on average were higher, but where depletion was also most severe. Copyright © 2006 John Wiley & Sons, Ltd.     

An Extended Replication of an Experiment for Assessing Methods for Software Requirements Inspections

We have performed an extended replication of the Porter-Votta-Basili experiment comparing the Scenario method and the Checklist method for inspecting requirements specifications using identical instruments. The experiment has been conducted in our educational context represented by a more general definition of a defect compared to the original defect list. Our study involving 24 undergraduate students manipulated three independent variables: detection method, requirements specification, and the order of the inspections. The dependent variable measured is the defect detection rate. We found the requirements specification inspected and not the detection method to be the most probable explanation for the variance in defect detection rate. This suggests that it is important to gather knowledge of how a requirements specification can convey an understandable view of the product and to adapt inspection methods accordingly. Contrary to the original experiment, we can not significantly support the superiority of the Scenario method. This is in accordance with a replication conducted by Fusaro, Lanubile and Visaggio, and might be explained by the lack of individual defect detection skill of our less experienced subjects.     

The effect of cavity-filling mutations on the thermostability of Bacillus stearothermophilus neutral protease

Cavities in the hydrophobic core of the neutral protease ofBacillus stearothermophilus were analyzed using a threedimensionalmodel that was inferred from the crystal structure of thermolysin,the highly homologous neutral protease of B.thermoproteolyticus(85% sequence identity). Site–directed mutagenesis wasused to fill some of these cavities, thereby improving hydrophobicpacking in the protein interior. The mutations had small effectson the thermostability, even after drastic changes, such asLeu284Trp and Met168Trp. The effects on T50, the temperatureat which 50% of the enzyme is irreversibly inactivated in 30min, ranged from 0.0 to +0.4°C. These results can be explainedby assuming that the mutations have positive and negative structuraleffects of approximately the same magnitude. Alternatively,it could be envisaged that the local unfolding steps, whichrender the enzyme susceptible towards autolysis and which arerate limiting in the process of thermal inactivation, are onlyslightly affected by alterations in the hydrophobic core.     

Quantitative calcium resistivity based method for accurate and scalable water vapor transmission rate measurement

The development of flexible organic light emitting diode displays and flexible thin film photovoltaic devices is dependent on the use of flexible, low-cost, optically transparent and durable barriers to moisture and/or oxygen. It is estimated that this will require high moisture barriers with water vapor transmission rates (WVTR) between 10(-4) and 10(-6) g/m(2)/day. Thus there is a need to develop a relatively fast, low-cost, and quantitative method to evaluate such low permeation rates. Here, we demonstrate a method where the resistance changes of patterned Ca films, upon reaction with moisture, enable one to calculate a WVTR between 10 and 10(-6) g/m(2)/day or better. Samples are configured with variable aperture size such that the sensitivity and/or measurement time of the experiment can be controlled. The samples are connected to a data acquisition system by means of individual signal cables permitting samples to be tested under a variety of conditions in multiple environmental chambers. An edge card connector is used to connect samples to the measurement wires enabling easy switching of samples in and out of test. This measurement method can be conducted with as little as 1 h of labor time per sample. Furthermore, multiple samples can be measured in parallel, making this an inexpensive and high volume method for measuring high moisture barriers.     

Case-Based Learning: Predictive Features in Indexing

Interest in psychological experimentation from the Artificial Intelligence community often takes the form of rigorous post-hoc evaluation of completed computer models. Through an example of our own collaborative research, we advocate a different view of how psychology and AI may be mutually relevant, and propose an integrated approach to the study of learning in humans and machines. We begin with the problem of learning appropriate indices for storing and retrieving information from memory. From a planning task perspective, the most useful indices may be those that predict potential problems and access relevant plans in memory, improving the planner's ability to predict and avoid planning failures. This predictive features hypothesis is then supported as a psychological claim, with results showing that such features offer an advantage in terms of the selectivity of reminding because they more distinctively characterize planning situations where differing plans are appropriate.We present a specific case-based model of plan execution, RUNNER, along with its indices for recognizing when to select particular plans—appropriateness conditions—and how these predictive indices serve to enhance learning. We then discuss how this predictive features claim as implemented in the RUNNER model is then tested in a second set of psychological studies. The results show that learning appropriateness conditions results in greater success in recognizing when a past plan is in fact relevant in current processing, and produces more reliable recall of the related information. This form of collaboration has resulted in a unique integration of computational and empirical efforts to create a model of case-based learning.     

Formalizing process-based risk with Value-Focused Process Engineering

Following calls to advance the integration of risk and business process modeling paradigms, this paper formalizes the process of incorporating risk into business process models through the principles of Value-Focused Process Engineering (VFPE). In doing so, the paper aims to extend the existing VFPE modeling notation to reflect a set of necessary constructs required to adequately represent risk in goal-oriented business-process models. The extended set of constructs is proposed to support a formal systems view of process-based risk. Process-based risk is formalized on the one hand, as a product of complex interactions between activity-based elements, and on the other hand, as a natural component of the value creation mechanism of an elementary function or a complex process. The proposed risk-aware VFPE formalism also formulates rules for decomposing risk in process models according to the organizational values, thereby enabling better risk visibility, reducing process complexity, and ensuring continuity of business processes.