Modelling of effects of ultrastructural morphology on the hygroelastic properties of wood fibres

Wood fibres constitute the structural framework of e.g. wood, paper, board and composites, where stiffness and dimensional stability are of importance. An analytical modelling approach has been used for prediction of hygroelastic response, and assessment of the stresses in thick-walled cylinder models of wood fibres. A wood fibre was idealised as a multilayered hollow cylinder made of orthotropic material with helical orientation. The hygroelastic response of the layered assembly due to axisymmetric loading and moisture content changes was obtained by solving the corresponding boundary value problem of elasticity. A simple solution scheme based on the state space approach and the transfer matrix method was employed. This was combined with an analytical ultrastructural homogenisation method, used to link hygroelastic properties of constituent wood polymers to properties of each layer. Predicted hygroelastic response captured experimentally measured behaviour. Fibres that were constrained not to twist showed a stiffer response than fibres allowed twisting under uniaxial loading. It was also shown that the ultrastructure, i.e. the microfibril angle, will control the hygroexpansion in the same way as it controls the compliance of the cell wall. Qualitative failure trends comparable with experimental observations could be established with stress analysis and a simple plane-stress failure criterion.     

A survey of RFID privacy approaches

A bewildering number of proposals have offered solutions to the privacy problems inherent in RFID communication. This article tries to give an overview of the currently discussed approaches and their attributes.

Achieving traceability in large scale continuous integration and delivery deployment,usage and validation of the eiffel framework

The importance of traceability in software development has long been recognized, not only for reasons of legality and certification, but also to enable the development itself. At the same time, organizations are known to struggle to live up to traceability requirements, and there is an identified lack of studies on traceability practices in the industry, not least in the area of tooling and infrastructure. This paper presents, investigates and discusses Eiffel, an industry developed solution designed to provide real time traceability in continuous integration and delivery. The traceability needs of industry professionals are also investigated through interviews, providing context to that solution. It is then validated through further interviews, a comparison with previous traceability methods and a review of literature. It is found to address the identified traceability needs and found in some cases to reduce traceability data acquisition times from days to minutes, while at the same time alternatives offering comparable functionality are lacking. In this work, traceability is shown not only to be an important concern to engineers, but also regarded as a prerequisite to successful large scale continuous integration and delivery. At the same time, promising developments in technical infrastructure are documented and clear differences in traceability mindset between separate industry projects is revealed.     

Simulation of thermally induced package effects with regard to piezoresistive pressure sensors

Microsystems are on their way out of laboratories into production. One of these microsystems, a piezoresistive pressure sensor developed by Robert Bosch GmbH, is examined within this paper. Obviously, one can detect undesirable temperature effects resulting from the sensor package, which influence the electrical characteristics of the sensor. By means of finite-element modelling (FEM), a simulation of the temperature effects can be managed. It is also possible to search for alternative designs of the sensor package.     

Modeling Abrasion Forces in a Pneumatically Powered Grinding Tool Using Compressible Large Eddy Simulation

This paper describes the design of a new kind of miniature abrading sphere, which is magnetically mounted inside a spherical gap and set in rotation pneumatically with air. Large eddy simulation is performed in conjunction with the compressible Smagorinsky model. Minimal temperature variation allows for the assumption of adiabatic walls. Fluid-solid interaction is modeled using the law of the wall for compressible turbulent flow. A parametric study is done to determine optimal geometric layout while taking physical restrictions into account. The resulting optimal configuration is then examined in detail in order to determine demands to be met by the computerized control of the magnetic bearing as well as to quantify the force available to the abrasion process. Finally, a mathematical relation is given that determines available abrasion force depending on standard volumetric flow rate and rotation frequency. The findings presented here provide a basis for further development of smaller versions of the tool.     

Modulation of Viscoelasticity and HIV Transport as a Function of pH in a Reversibly Crosslinked Hydrogel

Materials that respond to physiological stimuli are important in developing advanced biomaterials for modern therapies. The reversibility of covalent crosslinks formed by phenylboronate (PBA) and salicylhydroxamate (SHA) has been exploited to provide a pH‐responsive gel for application to the vaginal tract. Dynamic rheology reveals that the gel frequency‐dependent viscoelastic properties are modulated by pH. At pH 4.8 the viscous component dominates throughout most of the frequency range. As the pH increases, the characteristic relaxation time continues to increase while the G′_Plateau levels off above pH 6. At pH 7.5, the elastic component dominates throughout the frequency sweep and is predominately independent of frequency. Particle tracking assesses the transport of both fluorescently labeled HIV‐1 and 100‐nm latex particles in the PBA–SHA crosslinked gel as a function of pH. At pH 4.8 the ensemble‐averaged mean squared displacement at lag times greater than three seconds reveals that transport of the HIV‐1 and 100‐nm particles becomes significantly impeded by the matrix, exhibiting diffusion coefficients less than 0.0002 µm² s^?1. This pH‐responsive gel thus displays properties that have the potential to significantly reduce the transport of HIV‐1 to susceptible tissues and thus prevent the first stage of male‐to‐female transmission of HIV‐1.     

Occupational burnout, tolerance for stress, and coping among nurses in rehabilitation units.

The relation of problem-solving confidence, perceived tolerance of stressors, and situation-specific coping efforts to occupational burnout was examined among 88 nurses in physical rehabilitation units. Participants completed measures of problem solving and burnout, and were administered a questionnaire that required them to list stressors encountered at work and their ability to tolerate this stressor. Participants were also asked to list their typical ways of coping with this stressor. Consistent with predictions, confidence in one's ability to handle problems and perceived tolerance were significantly predictive of lower burnout scores, regardless of time spent on the job. Of the coping variables, emotion-focused coping was significantly associated with higher burnout scores. Post-hoc analyses of self-reported coping activities indicated that some coping efforts (e.g., taking time off from work, confronting a supervisor) could be construed as symptoms of burnout, according to theoretical conceptualizations. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Developing control logic using aspect-oriented programming and sequence planning

A fundamental functionality of a Programmable Logic Controller (PLC) is to control and execute a set of operations. But a large part of the program code is more involved in supporting the user with concerns like alarm, HMI, communication, safety and manual control. Code related to these supporting concerns is often tangled with operation execution code, the core concerns, which makes it hard to reuse.This paper describes a method to reuse code and functionality when developing PLC programs and code libraries. The method proposes that core concerns are planned with a software tool called Sequence Planner, and the supporting concerns are integrated into the core concerns with a tool based on aspect-oriented programming.     

Influence of Molecular Weight on the Performance of Organic Solar Cells Based on a Fluorene Derivative

The performance of organic photovoltaic (OPV) bulk‐heterojunction blends comprising a liquid‐crystalline fluorene derivative and a small‐molecular fullerene is found to increase asymptotically with the degree of polymerization of the former. Similar to various thermodynamic transition temperatures as well as the light absorbance of the fluorene moiety, the photocurrent extracted from OPV devices is found to strongly vary with increasing oligomer size up to a number average molecular weight, M_n ≈ 10 kg mol^?1, but is rendered less chain‐length dependent for higher M_n as the fluorene derivative gradually adopts polymeric behavior.