Angular memory and frequency interferometry for mean heightprofiling of a rough surface

The polarimetric angular memory effect is applied to obtain the average topographic height of a rough surface. This novel effect improves the height sensitivity while maintaining a good degree of correlation between the sensors. By using a reference flat surface, the interferometric phase is linearly related to the mean topographic height. The combination of angular memory and wideband frequency interferometry (AMFI) is realized and offers a means to design a robust interferometric system. Extension of the technique to the pulse scattering problem is studied through the two-frequency mutual coherence function, and its time-domain transform provides an equivalent way to obtain the mean topographic height by combining both spatial and temporal diversity. Millimeter-wave (MMW) experiments are conducted with rough surfaces of different statistics and scattering media of different types (gravel, sand, and rough surfaces) to prove the effectiveness of the technique     

Production of finely ground natural graphite particles with high electrical conductivity by controlling the grinding atmosphere

Natural graphite particles with high crystallinity sieved to obtain a particle size range of under 63 μm were ground with a ball mill, under various well-controlled grinding atmospheres such as N₂, O₂, He, H₂, and vacuum. The ratio, X_dif50/X_st50, i.e. between the 50 wt.% Stokes diameter and the 50 wt.% laser diffraction diameter, of the ground particles, was used as an index of the flakiness of the particles. The specific resistance of films composed of the ground graphite particles was systematically measured. The rate of reduction in the size of the particles by grinding was slow under an O₂-rich atmosphere such as 100% O₂ and dry air. On the other hand, it was relatively fast in vacuum, or under an N₂ or He atmosphere, and a gas mixture of 99% N₂ and 1% O₂. The rate of size reduction by grinding under a H₂ atmosphere was intermediate. In our experimental conditions, the flakiness of the ground particles increased with the decrease in the particles’ sizes. The electrical conductivity of the ground particles, however, tended to decrease with the decrease in their sizes. Under the condition that the Stokes diameter of the ground particles remains constant, the electrical conductivity of films made from the ground particles increases with the increase in the flakiness of the particles. It was finally determined from our systematic grinding experiments that small flaky particles, which had a size, X_st of ∼1 μm, with a high electrical conductivity can be produced by grinding in a gas mixture of 99% N₂ and 1% O₂. In this case, the flaky shape of the ground particles was visually confirmed by scanning electron microscopy.     

Production of thin graphite sheets for a high electrical conductivity film by the mechanical delamination of ternary graphite intercalation compounds

Herein we propose a production scheme for conductive films composed of thin graphite sheets with high crystallinity and polymeric resin. The crystalline graphite sheets were successfully produced from natural graphite powder by solution-phase synthesis of graphite intercalation compounds (GICs), following a wet planetary-ball milling under mild conditions. The shear forces in the milling pot lead to a peeling of graphite flakes. Taking into consideration the interlayer bonding force, the delamination should be preferentially done from the expanded GICs interlayer rather than intrinsic graphite one. Some composite films derived from the phenolic resin and flaky graphite sheets displayed much higher electrical conductivities compared to the film from the feed graphite particles. We also demonstrate the stage structure of synthetic GICs affected the film conductivity. The composite films made from exfoliated products of ground (around stage IV) GICs exhibited high electrical conductivity with a small amount of the graphite sheets.     

Polarized pulse waves in random discrete scatterers

In recent years there has been increasing interest in the use of polarization for imaging objects in a cluttered environment. Examples are optical imaging through clouds, optical detection of objects in a biological medium, and microwave detection of objects in clutter. We extend previous studies of continuous-wave scattering to pulse-polarization scattering in discrete scatterers. We solve the time-dependent vector radiative transfer equation for a plane-parallel medium by using Mie scattering and the discrete ordinates method. The time-dependent degree of polarization and cross-polarization discrimination are calculated and verify the advantages of circular over linear polarization in maintaining greater copolarized components rather than cross-polarized components.     

A 20 GHz Steerable Array Antenna Using 3-bit Dielectric Slab Phase Shifters on a Coplanar Waveguide

A simple steerable array antenna is designed and developed using a movable dielectric phase shifter. The change of effective dielectric constant at different dielectric slab positions on a coplanar waveguide is used as the phase shifter. The impedance matching and desired phase shift conditions are satisfied at two slab heights, and the reflection is designed to be minimized at these slab positions. The low-loss dielectric material is used as the dielectric slab and is placed close to a coplanar transmission line with airgap. The 4times4 steerable array antenna with the phase shifters is designed and fabricated at 20 GHz. The H-plane radiation patterns are measured at different phase shift positions and compared with the expected results     

Studies of the angular correlation function of scattering by randomrough surfaces with and without a buried object

The discrimination of the scattered wave from an object buried in shallow ground from that of the rough surface is a difficult task with present ground penetrating radar (GPR) systems. Recently, a new approach for this classical problem has been proposed and its effectiveness has been verified. This new method is based on the angular correlation function (ACF) of the scattered wave observed at two or more different incident and scattered angle combinations. It has been shown that the angular memory signatures of rough surfaces are substantially different from those of typical man-made targets and by choosing the appropriate incident and scattered angles, the surface scattering can be minimized whereas the scattering from the target is almost unchanged. The authors present detailed numerical studies of the ACF of the scattered wave from rough surfaces with and without a buried object. To obtain the ACF, the three averaging methods: realization, frequency and angular averaging, are tested numerically. It is shown that a single random rough surface of moderate extent can exhibit memory effect by using frequency averaging. Frequency averaging with a wide bandwidth is also effective for suppressing fluctuation in ACF and is most useful for practical applications. Numerical simulations indicate that even when the ratio of scattered intensities with and without the buried object is close to unity, the corresponding ratio of ACF magnitude can be more than 10 dB. Thus, using the ACF is superior to using the radar cross section (RCS) in the detection of buried objects     

Residues of different gel formulations on dentinal walls: A SEM/EDS analysis

The aim of this study was to evaluate the presence of residues of sodium hypochlorite gel, chlorhexidine gel, and EDTA gel on dentinal walls after canal preparation through chemical SEM‐ elemental chemical microanalysis (EDS) analysis. Forty‐eight single‐rooted teeth were selected. They had their crowns sectioned and were instrumented with a reciprocating system. The canals were irrigated with 5 mL of saline solution during root canal preparation. After instrumentation, the root canals were irrigated with 3 mL 17% EDTA followed by 1 min of ultrasonic passive activation (3× 20 sec) to remove the smear layer, and then irrigated with 3 mL of saline solution. The specimens were randomized into three groups (n = 12) according to the chemical substance that filled the root canal for 30 min: GI: 5.5% sodium hypochlorite gel; GII: 2% chlorhexidine gel; GIII: 24% EDTA gel; Negative control group: no substance was used. Then, the root canals were irrigated with 6 mL of saline solution followed by 1 min of ultrasonic passive activation (3× 20 sec). After ultrasonic activation, the canals were irrigated with 2 mL saline. The roots were sectioned, and the percentage of each chemical element present in the samples was analyzed through chemical SEM‐EDS microanalysis. All experimental groups showed a significantly higher percentage of chemical elements (Na and/or Cl) than the control group (P < 0.03). This in vitro study has shown that, regardless of chemical solutions used even after the final irrigation protocol, chemical residues of different substances remained attached to the root canal walls. Microsc. Res. Tech. 78:495–499, 2015. © 2015 Wiley Periodicals, Inc.     

Effect of the root canal final rinse protocols on the debris and smear layer removal and on the push‐out strength of an epoxy‐based sealer

The aim of the present study was to evaluate the efficacy of QMiX, SmearClear, and 17% EDTA for the debris and smear layer removal from the root canal and its effects on the push‐out bond strength of an epoxy‐based sealer by scanning electron microscopy (SEM). Forty extracted human canines (n = 10) were assigned to the following final rinse protocols: G1‐distilled water (control), G2–17% EDTA, G3‐SmearClear, and G4‐QMiX. The specimens were submitted to a SEM analysis to evaluate the presence of debris and smear layer, respectively, in the apical or cervical segments. In sequence, forty extracted human maxillary canines with the root canals instrumented were divided into four groups (n = 10) similar to the SEM analysis study. After the filling with AH Plus, the roots were transversally sectioned to obtain dentinal slices. The specimens were submitted to a push‐out bond strength test using an electromechanical testing machine. The statistical analysis for the SEM and push‐out bond strength studies were performed using the Kruskal–Wallis and Dunn tests (α = 5%). There was no difference among the G2, G3, and G4 efficacy in removing the debris and smear layer (P > 0.05). The efficacy of these groups was superior to the control group. The push‐out bond strength values of G2, G3, and G4 were superior to the control group. The ability to remove the debris and smear layer by SmearClear and QMiX was as effective as the 17% EDTA. The final rinse with these solutions promoted similar push‐out bond strength values. Microsc. Res. Tech. 76:533–537, 2013. © 2013 Wiley Periodicals, Inc.     

Adherent leukocytes to the aortic wall promotes atherosclerosis in the Watanabe heritable hyperlipidemic rabbits

It is well known that leukocytes adherence to the endothelium of arterial wall occurs in diet-induced hypercholesterolemic animals. We examined the relationship between leukocytes adherence and atherosclerosis in the thoratic aorta of the Watanabe heritable hyperlipidemic rabbits (WHHL rabbits). Five of 2 or 3 months old WHHL rabbits were sacrificed and after perfusion fixation with 2.5% gulutaraldehyde, thoratic aorta was taken out carefully and divided into the 4 portions: Portion 1; cranial side of aortic arch, Portion 2; caudal side of aortic arch, Portion 3; upper side of thoratic aorta except aortic arch, Portion 4; lower side of thoratic aorta except aortic arch. Three to 6 samples from each portion except branching sites were examined using electron microscopy, and the counts of adherent leukocytes (LC) in each portion were calculated. Seven of 6 to 12 months old WHHL rabbits were sacrificed and the internal side of thoratic aorta was cut opened from the ventral side and the atherosclerotic lesions were copied. From these copies, the % area of atherosclerotic plaques (%AT) in each 4 portions as described was calculated using microcomputer. LC in Portion 1 to 4 was 265 +/- 62, 234 +/- 46, 53 +/- 8 and 41 +/- 13/mm2 respectively. LC in Portion 1 or 2 was significantly larger than that in Portion 3 or 4 (p < 0.05). The endothelium to which leukocytes adhered was intact. %AT in Portion 1 to 4 was 68 +/- 8, 63 +/- 8, 40 +/- 8 and 34 +/- 8% respectively. %AT in Portion 1 or 2 was significantly larger than that in Portion 3 or 4 (p < 0.05). It is concluded that leukocytes adherence to the intact endothelium of the arterial wall was one of the geneses and promoters of atherosclerosis in WHHL rabbits.